• Journal of the Mineralogical Society of Korea
• /
• v.19 no.3 s.49
• /
• pp.171-187
• /
• 2006

The status of heavy metal contamination was investigated using chemical analyses of stream waters and sediments obtained from Samsanjeil and Sambong Cu mining area in Goseong-gun, Gyeongsangnam-do. In addition, the degree and the environmental risk of heavy metal contamination in stream sediments was assessed through pollution index (Pl) and danger index (DI) based on total digestion by aqua regia and fractionation of heavy metal contaminants by sequential extraction, respectively. Not only the degree of heavy metal contamination was significantly higher in Samsanjeil area than in Sambong area, but its environmental risk was also revealed much more serious in Samsanjeil area than in Sambong area. The differences in status and level of contamination and environmental risk between both two mining areas may be attributed to existence of contamination source and geology. Acid mine drainage is continuously discharged and flows into the stream in Samsanjeil mining area, and it makes the heavy metal contamination in the stream more deteriorated than in Sambong mining area in which acid mine drainage is not produced. In addition, the geology of Samsanjeil mining area is mainly comprised of andesitic rocks including a small amount of calcite and having lower pH buffering capacity fer acid mine drainage, and it is likely that the heavy metal contamination cannot be naturally attenuated in streams. On the contrary, the main geology of Sambong mining area consists of pyroclastic sedimentary Goseong formation containing a high content of carbonates, particularly calcite, and it seems that these carbonates of high pH buffering capacity prevent the heavy metal contamination from proceeding downstream in stream within that area.

• Journal of Environmental Health Sciences
• /
• v.36 no.5
• /
• pp.391-401
• /
• 2010

A reduction in risk of occupational exposure to chemical hazards within the workplace has been the focus of attention both through industry initiatives and legislation. The aims of this study were to develop an exposure matrix by industry and process, and to apply this matrix to control the risk of occupational exposure to Dichloromethane (DCM). The exposure matrix is a tool to convert information on industry and process into information on occupational risk. The exposure matrix comprised industries and processes involving DCM, based on an exposure database provided by KOSHA (the Korean Occupational Safety and Health Agency), which was gathered from a workplace hazards evaluation program in Korea. The risk assessment of the exposure matrix was performed using Hallmark risk assessment tool. The results of the risk assessment were indicated by a Danger Value (DV) calculated from the combination of hazard rating (HR), duration of use rating (DUR), and risk probability rating (RPR) of exposure to the chemical, and were divided into four control bands which were related to control measures. The applicability of the risk assessment of the exposure matrix was evaluated by a field study, and survey of the employees of the exposure matrix groups. Among 45 industries examined, this study found that greater attention should be paid to two industries: the manufacture of other optical instruments and photographic equipment, and the manufacture of printing ink, and to one process among 47 examined, the packing process in the manufacture of printing ink, because these were regarded as carrying the highest risk. This tool of a risk assessment for the exposure matrix can be applied as a general exposure information system for hazard control, risk quantification, setting the occupational exposure limit, and hazard surveillance. The exposure matrix includes workforce data, and it provides information on the numbers of exposed workers in Korea by agent, occupation, and level of exposure and risk.

• Korean journal of food and cookery science
• /
• v.13 no.5
• /
• pp.592-601
• /
• 1997

The purposes of this study were to develop Hazard Analysis Critical Control Point-based standardized recipe applicable to cook/chilled soy sauceglazed mackerel and to evaluate the qualities related to the product flow of this item. After conducting experimental cooking, preliminary test, and analysis of recipes, critical control points were identified, control methods were determined, and HACCP-based recipe was standardized. At each critical control point, time-temperature profile was recorded and microbiological analysis (total aerobic plate counts, psychrotrophic plate count, coliform, and fecal coliform count), chemical analysis (pH, acid value and volatile based nitrogen (VBN)) and sensory evaluation of the item were done. Time-temperature data showed that the time the menu item had passed through temperature danger zone (5∼60$^{\circ}C$) during all phases was 60 min. At rapid cooling, but after cooling at room temperature, the temperature of this menu item did not drop below the ambient temperature. The results of microbiological test were negative throughout all phases following cooking and the results of chemical analysis did not change significantly in terms of storage periods except for VBN which increased on 7th day significantly(p<0.05). After steam/convection oven reheating and microwave oven reheating, the sensory score of the only appearance decreased significantly related to the storage time of overall quality profiles. But significant differences were not detected according to two reheating methods. In conclusion, this HACCP-based recipe was considered as an effective tool for assuring microbial as well as sensory quality of this cook/chilled item.

• Journal of the Korean Society of Safety
• /
• v.25 no.6
• /
• pp.34-39
• /
• 2010

The purpose of this study is to suggest objective evaluation model as a plan to utilize as opportunity in establishing judgment standard of mutual inspection criteria and to upgrade inspection ability by reviewing and analyzing level of danger and importance in advance based on inspection results of inspection institutions regarding tower cranes used in construction fields. Tower crane is a mechanical device transporting construction supplies and heavy materials to places over 20~150M high from the ground for the period ranging from a short time of 2~3 months to two years after being installed in construction sites in vicinity of buildings or structures and is an important facility indispensable for construction sites. However, since use period after installation is short and professional technical ability of technicians working on-site about of tower crane is poor, systematic and quantitative safety management is not carried out As a part of researches on procedure of RBI(Risk Based Inspection) possible to apply to Knowledge Based System based on knowledge and experiences of experts as well as to tower cranes for solving these problems, quantitative RPN(Risk Priority Number) was applied to RPN utilizing technique of FMEA(Failure Mode and Effect Analyses). When general RBI 80/20 Rule was applied parts with high level of risks were found out as wire rope, hoist up/down safety device, reduction gear, and etc. However, since there are still many insufficient parts as risk analyses of tower crane were not established, it is necessary for experts with sufficient experiences and knowledge to supplement active RBI techniques and continuous researches on tower cranes by sharing and setting up data base of important information with this study as a starting point.

• Journal of the Korean Geosynthetics Society
• /
• v.16 no.2
• /
• pp.23-33
• /
• 2017

Due to the rapid development of cities, densities and heights of urban structures are increased, and much larger and more underground spaces are being developed accordingly. Increasing development of underground spaces has induced more ground sinks and underground cavities. Therefore, safety of people is threatened by potential ground collapses and possible accidents, which may result from underground cavity. To actively respond against potential danger of ground sink, evaluation of existing cavity grade and development of recovery procedure are important. There exists the ground sinking management grade system of expressway developed as local standards in Japan. Recently, ground sinking management grade system of Seoul was developed with consideration of road and asphalt conditions. In this study, 209 underground cavities of ${\bigcirc}{\bigcirc}$ area were explored and their cavity shapes and grades were evaluated based on both ground sinking management grade systems of Japan and Seoul. Comparison is made between cavity grades evaluated based on both grading systems from Japan and Seoul. As a result of comparative analysis, the conservatively-estimated cavity grades requiring emergency restoration based on the Japanese management grade system of expressway result from neglection of layer thickness of surface pavement, considering only width and cover depth of a cavity.

• Journal of Conservation Science
• /
• v.26 no.2
• /
• pp.121-132
• /
• 2010

The Bukjiri Maaeyeoraejwasang (National Treasure No. 201) consists of two-mica granite in medium size, which was the simbol of power in the region of the Silla period. Magnetic susceptibility of the host rock was measured as 0.41(${\times}10^{-3}$ SI unit), which has the similar range with surrounding outcrop. The Buddha developed parallel discontinuous plane of NE to SW strike and damaged seriously by exfoliation, granular disintegration and brown discoloration as 41.5%, 16.7% and 40.0%, respectively. As a result of the ultrasonic velocity, which was relatively weak values as 1,629m/s (Buddha area) and 1,549m/s (surrounding outcrop), improved about 900m/s compared to last treatment. From the results of the evaluation for slope stability, identified the possibility of toppling failure in the Buddha, and planar and wedge failure in host rock. Therefore, we suggest for the safely conservation of the Buddha, continuance monitoring for understand behavior of discontinuity system of the surface, and necessitate foundation reinforcement method for the rock which has the danger of collapse.

• Journal of Advanced Navigation Technology
• /
• v.15 no.5
• /
• pp.687-695
• /
• 2011

The defect caused by the software industry that is the source of knowledge-centric, information-centric and technology-centric affects an engine which operate a major role for operation of aircraft. Therefore, we should minimize the danger from the defect by strengthening the stability of aviation through the stability analysis of software. In this paper, we examine the laws and systems about the aircraft defects and software safety and propose the enhancement and the enactment of the law or measures to strengthen aviation safety. We should the existing law or system as items, such as the revision related to the safety analysis, standards of quality assurance including safety, application of quality assurance that you must attach the safety analysis report, assessment of detailed instructions of certification authorities. In addition, we should enact the new law and system as items such as the mandatory software evaluation and certification, continuous assessment based on the software life cycle, mandatory introduction of a standardized development methodology, strengthening of advanced workforce system. We can expect the improvement of software quality and an enhanced aviation safety by improving existing laws or systems and enacting new laws or systems.

• 재활복지
• /
• v.22 no.3
• /
• pp.69-91
• /
• 2018

This study aims to identify factors of life satisfaction of the adults with developmental disabilities, focusing on the comparison between young and old. Data are collected through in-depth interview of the adults with developmental disabilities as well as via workers proxy responses at the group home. Regression model analysis is conducted based on 387 cases. The result shows that the young adults with developmental disabilities are more likely to satisfied with life when they evaluate job performance of workers at the group home and when they are more actively involved in community activities. For the old adults with developmental disabilities, life satisfaction is positively associated with their evaluation of job performance of workers at the group home as in the young adults. In addition, life satisfaction of the old adults is higher when they feel less fatigue. It is also higher for those with more choices on residence and higher level of social activities. The findings reveals that enhancement of life satisfaction for the old adults with developmental disabilities dwelling at group home require supports and services for health and social activities different from other ages. It shares the general ideas that service efforts should be made for needs and desires of the recipients. The present study suggests to expand our research interests to include the disabled in danger of early aging, such as the persons with Down Syndrome and the persons with intellectual disability and cerebral palsy, and look into their particular needs.

• The Journal of the Korea Contents Association
• /
• v.10 no.3
• /
• pp.337-346
• /
• 2010

The purpose of this study is to explore how security science graduates in casinos are socialized into the workplace. Participants for this study were seven security guards who work for two of three casinos for foreign customers in the city of Seoul. All the participants majored in the security science in colleges. They had 1 to 5 years of work experience. Their main job responsibilities were deterrent to crimes and watch for impending danger in the casinos. A variety of qualitative data collection techniques for this study included formal and informal interviews, stimulated-recall interview, observations, and field notes. Analytic induction and constant comparison were utilized to analyze data. Triangulating and member checks were employed to enhance trustworthiness. The findings of this study were as follow: Firstly, In acculturation, sports experience and media attraction were revealed as factors. Secondly, In professional socialization, college education and senior students in the program were found. Lastly, organizational socialization, Difficulty of relationship, lack of risk management training, lack of team cohesion, pride himself as a security guard, and unclear evaluation system. In conclusion, a variety of influential factors appeared through his occupational socialization even though there were negative and positive factors.

• Korean Security Journal
• /
• no.11
• /
• pp.129-157
• /
• 2006

With rapid social change, by culminating the social hazards and the safety problems about it are on the increase too. According to the needs for the safety the demand of the private guard & security provided the safety and security service against danger is also increasing. As the need for the safety is increasing, so recently the private guard & security industry is extended. Therefore the purpose of this study is to grasp and carry out researches into the legal structure on the Security contract, is to analyze the formation of contract and find out the ensuing problem in order to prevent or settle the dispute which is apt to occur between the specific client and the security companies. In order to minimize the dispute going with security relationship in particular, it is necessary that one should write down the agreed contents as the document explicitly to make a security contract with the parties. Hereupon in the plan which standardizes the security contract with each parties autonomously, it is suggested that this study should present the model of Dispute Resolution Clause Especially it is the best means that it is amicable consultation or negotiation as the effective way of settlement methods of private dispute arising from the concerned parties. In inevitable case it recommends the method which solves the dispute by means of an arbitration than litigation at administration of justice(in terms of jurisdiction). If the parties wish to settle the disputes by arbitration, they must come to an arbitration agreement in the form of a arbitration clause in the security contract. After the test and evaluation through application utilizing it in actual security field, the security standard contract regulates about it and this terms should widely apply a individual case to whole industry.