• Steel and Composite Structures
• /
• 제22권6호
• /
• pp.1391-1415
• /
• 2016

Limit load of pressure bearing structures was reviewed in this article. By means of the finite element analysis, limit load of pressurized cylinder with nozzle was taken as an example. Stress classification method and Elastic-plastic finite element analysis combining with limit load determination methods were used to determine limit load of cylinder with nozzle. Comparison of limit load determined by different methods, the results indicated that limit load determined by linearization method was the smallest. Limit load determined by twice elastic slope criterion was the nearest than experimental results. Elastic-plastic finite element analysis had comparably computational precision, but required time consuming. And then the requirements of computer processing and storage capacity by power system became higher and higher. Most of criteria for limit load estimation included any human factors based on a certain substantive characteristics of experimental results. The reasonable criterion should be objective and operational.

• 대한조선학회논문집
• /
• 제41권3호
• /
• pp.35-40
• /
• 2004

Since the scale of vessels is growing up recently, some troubles between the shaft and after bush bearing are frequently reported. Generally, mean pressure on bush bearing is used as a design criterion. However, in some case of the long bearing such as after bush bearing of the propulsion shaft, it might be liable to be locally under high pressure. As for the main engine bearings and the intermediate shaft bearing, it is reasonable to take the mean pressure as a design criterion. But, in case of after bush bearing, it is not sufficient because of the possibility of high pressure caused by local contact. In this study, Hertzian contact condition was applied to evaluation of the local pressure for after bush bearing. To reduce the local maximum pressure, the height of the after bush bearing was controlled. It was found that local maximum pressure could be reduced effectively by taking a partial slope on the white metal of the aft bush bearing.

• 대한한의학회지
• /
• 제42권3호
• /
• pp.139-152
• /
• 2021

Objectives: The purpose of this review is to investigate the latest traditional Chinese medicine clinical studies on pediatric tic disorder with Tuina treatment and propose the directions of future studies and clinical applications. Methods: To obtain data from CNKI, set the field by '中醫學', '中藥', '中西醫結合' and used keywords '抽动障碍', '抽動穢語綜合', '小兒抽动', '兒童抽动' and '推拿', '導引', '按摩', 'Tuina', 'massage' in cross combination way. Results: 12 clinical studies were selected. These studies were analyzed by author & year, subjects, diagnostic criterion, evaluation criterion, syndrome differentiation, treatment period, methods& results, frequent acupoints and assessment of the quality of studies. All of reports achieved effective therapeutic results on the pediatric tic disorder with Tuina treatment. Conclusion: Tuina treatment has a positive effect and are easily accepted by children who have fear and rejection to traditional Korean Medicine such as acupuncture and Herbal remedy. It is also safe and simple to operate. So the Tuina treatment is worthy to disseminate potential for further development in the treatment of pediatric tic disorders.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.275-279
• /
• 2001

There are two kinds of the design criteria of piping system in petrochemical plant design. The first is on static state evaluation by thermal growth and the other is on dynamic evaluation by piping vibration. In the static design evaluation, the ASME B31.3 code defines 7000 cycles of fatigue life in operating the piping system with design condition. However, the dynamic design evaluation in comparative with small displacements of high frequencies to static condition has not established clearly the method, yet. So, this study purposes to present the trial of a proposal of dynamic design criterion on the basis of static design method.

• 대한안전경영과학회지
• /
• 제7권1호
• /
• pp.11-23
• /
• 2005

It is difficult to put it into practice in that it requires bearing too much burden to draw out the planning itself in a case of large construction work. Consequently in this paper we select evaluation criteria by construction progress, classify into several categories, and regard potential danger which often occurs, as a evaluation criterion. Further step is to allow workers or collaborated companies to express their expert opinions or experiences and to encourage quality and process control and autonomous safety control by applying PSM(Process Safety Management) method using AHP(Analytic Hierarchy Process) and to development of PSIM(Process Safety Information Management) evaluation method in the construction. The reason why PSIM method should be quantitative and substantial progress is because it contributes Korean constructing companies to enhancing their safety control ability and to taking an equal stance just like developed countries, thereby strengthening their competitive edges.

• Journal of Nutrition and Health
• /
• 제33권8호
• /
• pp.864-872
• /
• 2000

This study intended to evaluate the validity of the simple nutrition screening test that had been developed with the elderly living in Cheongju as a subject. Nutrition screening score(NSS) and reference standards for nutritional and health status(nutrient intakes, mean adequacy ratio, perceive health, and serum albumin, hematocrit, and hemoglobin) were estimated by using the date obtained in 1996 from the 174 elderly living in Taejon, Statistical analysis showed significant correlations between mean adequacy ratio(MAR) and NSS(r=0.341) and also between NSS and biological indices such as albumin and hematocrit, Around 65-75% of the elderly with perceive health and low level of serum albumin, hemoglobin and hematocrit had NSS$\leq$ll. Sensitivity, specificity, and positive predictive values(PPV) were calculated from the crosstabulation of the three categories of NSS(high, moderate, and low nutritional risk) and low categories MAR(< 0.75, undernutrition;$\geq$0.75, normal) to validate the cut-off point for high or low nutritional risk by NSS. It was suggested that point l1 was appropriate as a criterion to determine high risk of undernutrition, but point 16 was better than 17 as criterion to determine low nutritional risk in the Taejon elderly. When point ll was used as a criterion of high nutritional risk, sensitivity, specificity, and PPV are 59.5, 60.5 and 82.1 respectively. When point 16 was used as a criterion of low nutritional risk, sensitivity, specificity, and PPV are 25.6, 95.4, and 64.7%, respectively. In conclusion, nutrition screening test that had been developed can be a simple, easy, and proper instrument to classify the high risk group of undernutrition. A further validation study seems to be required among other groups of individuals for the screening test to the finalized as a more valid instrument identifying Korean elderly at nutrition and health risk(Korean J Nutrition 33(8) : 864-872, 2000)

• 유기물자원화
• /
• 제21권2호
• /
• pp.88-96
• /
• 2013

본 연구의 목적은 고형폐기물의 메탄발생 특성을 나타내기 위한 1차 반응식과 S형태 식들의 적합성을 평가하는 것이다. S형태 식은 수정 Gompertz와 Logistic 식을 사용하였다. 모델의 적합성을 평가하기 위해 잔차제곱합, 표준제곱근 오차, Akaike's information criterion 등의 통계분석을 실시하였다. AIC (Akaike's information criterion)는 모델의 변수 개수 차이에 따른 모델 적합성을 비교하기 위하여 적용하였다. 1차 반응식의 경우 지체기를 고려하지 않을 때보다 고려하였을 경우 잔차제곱합과 표준제곱근 오차는 감소하는 것으로 나타났다. 그러나 1차 반응식의 경우 S형태 식보다 AIC가 상대적으로 높게 나타났다. 이는 S형태 식이 1차 반응식보다 메탄발생특성을 나타낼 때에 더욱 적합한 것으로 사료된다.

• 공학교육연구
• /
• 제20권1호
• /
• pp.28-44
• /
• 2017

This paper deals with analyzing accreditation findings and the causes for the Weakness in the review by the EAC(Engineering Accreditation Committee) of ABEEK in 2015. As results of accreditation review by the EAC and CAC of ABEEK, Weakness findings were 697 cases which made up 56.94% of total findings. Deficiency and Weakness are considered to have been resolved only when the correction or revision has been implemented. The criterion which has the most Weakness findings in the 2015 accreditation review was the criterion 3 Curriculum. By the way the variety and quantity of the Weakness findings are so huge that the analysis of the causes for Weakness findings is focused on the Criterion 3 Curriculum. The findings on program accreditation are made on the basis of the Accreditation Actions Guide. Accordingly in view of formal logic in the accreditation review, the accreditation findings should comply with the Accreditation Actions Guide consistently. In this respect, the Weakness findings in the accreditation review can not be justified. On the other hand changeover in the accreditation policy of the ABEEK may be necessary. If the quality of the engineering education is improved continuously through the accreditation review, accreditation fulfills its purpose.

• Journal of the Korean Data and Information Science Society
• /
• 제25권3호
• /
• pp.473-483
• /
• 2014

ROC 곡선과 ROC 곡면을 확장한 4차원 이상의 공간에서의 ROC 다면체는 시각적인 표현이 어렵기 때문에 활용하기 어려우나, ROC 다면체 아래 공간을 측정하는 HUM 통계량에 대하여는 AUC와 VUS 통계량을 기반으로 정의가 가능하고 값을 구할 수 있으므로 본 연구는 네 가지 범주의 분류모형의 판별력을 측정하는 확률을 정의하고 연구한다. 그리고 Basel II를 기반한 부도확률에 대한 AUC의 판별력 판단기준을 제안한 연구를 확장하여, 네 범주 분류모형의 판별력을 측정하는 HUM 통계량에 관한 판단기준을 13단계로 구분하여 제안하고 활용하는 방법을 설명한다. 다양한 분포함수에 대하여 얻은 HUM 값을 바탕으로 제안한 판단기준을 탐색하기 위하여 삼원구획그림을 활용하여 판단기준을 설명한다.

• 한국안전학회지
• /
• 제37권2호
• /
• pp.10-17
• /
• 2022

Currently, in Korea, lower and upper tier qualifying quantities of the 97 substances requiring preparation for accidents have been designated. The information on the submission of chemical accident prevention management plan varies depending on whether the handling volume is above or below the lower or upper qualifying quantity. Because the criteria of the lower and upper qualifying quantities of substance requiring preparation for accidents are not stipulated in the Chemical Substances Control Act, this study attempted to establish a criterion through significance verification. In addition, the study investigated whether these qualifying quantities are related to the Globally Harmonized System of Classification and Labelling of Chemicals (GHS), toxic concentration endpoint, and National Fire Protection Association (NFPA). Finally, by comparing the risk categorization of the GHS, endpoint, and NFPA, it was evaluated whether the circulation-volume-based risk categorization of the substance requiring preparation for accidents that are in the top 13 is appropriate. The qualifying quantities of benzene, toluene, and sulfuric acid needed to be adjusted upward, while those of methyl alcohol and ammonia were adjusted downward from the current qualifying quantities. It is required to establish a quantified criterion that fully reflects the domestic situations in Korea and various indicators such as toxicity, physicochemical properties, and circulation volume for the qualified criterion of hazardous chemical substances. The study is expected to be helpful in establishing an efficient system by systematizing the criterion for qualifying quantity.