• 산업공학
• /
• 제24권2호
• /
• pp.105-111
• /
• 2011

Measurement protocols for hand anthropometry have been studied for ergonomic product design. The present study developed a 3D semi-automatic measurement protocol (3D-SAMP) which semi-automatically measures various hand dimensions using a 3D scanner. The 3D-SAMP was compared with the conventional direct measurement method (DMM) to examine its effectiveness. The 3D-SAMP consists of (1) fabricating a plaster cast of the hand, (2) placing landmarks on the plaster hand, (3) scanning the plaster hand with a 3D scanner, (4) identifying automatically the positions of the landmarks on the digital hand, and (5) extracting automatically hand anthropometric measurements (lengths, widths, thicknesses, and circumferences). An evaluation experiment conducted in the study found the 3D-SAMP preferred to the DMM in terms of reliability (the number of dimensions exceeding the variability criteria SD=2 mm and CV=5% : 3D-SAMP =2 and DMM=24) and ease of measurement (3D-SAMP=5.2 and DMM=4.3 out of 7). The 3D-SAMP can be applied to ergonomic design of a hand-held product.

• 한국정밀공학회지
• /
• 제22권5호
• /
• pp.113-120
• /
• 2005

Because of the turbulent markets and the increasing demand on product quality, the application of new technology to practice is increasingly important. In case of automotive industries, they take interest in laser welding to solve these problems because laser welding has many advantages such as good accessibility, welding quality, fast welding speed and so on. To apply this technology to welding of car body, the data of laser welding are collected through lots of the experiment according to the material, geometry and layer number of welding points. Based on the experiment results and the information of product, i.e. the car side panel, the clustering of stitches for laser welding was carried out and the optimal equipments are selected through the comparison between the requirements of welding and the potential of equipments. Using these results, laser welding cell for the car side panel are configured with the concept of the digital manufacturing, which ensures maximum planning security with visualization and simulation. Finally, the optimal laser welding cell is chosen by the evaluation of alternative cells with assessment criteria.

• 한국임상약학회지
• /
• 제7권2호
• /
• pp.67-72
• /
• 1997

The bioequivalence of two lomefloxacin tablets was evaluated in 16 normal male volunteers (age $21\sim30$ yrs) following oral administration. Test product was 'Lomaxacin tablet' made by Kolon Pharmaceutical Co. and reference product was 'Maxaquin tablet' made by Searle Ciba-Geigy Korea Co. After one tablet containing 400 mg of lomefloxacin was administered, blood was taken at predetermined time intervals and the concentration of the drug in plasma was determined with an HPLC method using fluorescence detector. AUC, $C_{max},\;and\;T_{max}$ were calculated and statistically analyzed for the bioequivalence of the two products. The results showed that the differences in AUC, $C_{max},\;and\;T_{max}$ between two products were $0.90\%,\;1.09\%,\;and\;2.44\%$, respectively. The powers (1-${\beta}$) for AUC, $C_{max},\;and\;T_{max}\;were\;>95\%,\;>95\%,\;and\;93.8\%$, respectively Detectable differences $(\Delta)$ and confidence intervals were all less than $20\%$. All of these parameters met the criteria of KFDA for bioequivalence, indicating that 'Lomaxacin tablet' is bioequivalent to 'Maxaquin tablet'.

• 한국데이타베이스학회:학술대회논문집
• /
• 한국데이타베이스학회 1999년도 춘계공동학술대회: 지식경영과 지식공학
• /
• pp.253-260
• /
• 1999

The recycling cell formation problem means that disposal products me classified into recycling part families using group technology in their end of life phase. Disposal products have the uncertainties of product status by usage influences during product use phase and recycling cells are formed design, process and usage attributes. In order to treat the uncertainties, fuzzy set theory and fuzzy logic-based neural network model are applied to recycling cell formation problem far disposal products. In this paper, a heuristic approach fuzzy ART neural network is suggested. The modified fuzzy ART neural network is shown that it has a great efficiency and give an extension for systematically generating alternative solutions in the recycling cell formation problem. We present the results of this approach applied to disposal refrigerators and the comparison of performances between other algorithms. This paper introduced a procedure which integrates economic and environmental factors into the disassembly of disposal products for recycling in recycling cells. A qualitative method of disassembly analysis is developed and its ai is to improve the efficiency of the disassembly and to generated an optimal disassembly which maximize profits and minimize environmental impact. Three criteria established to reduce the search space and facilitate recycling opportunities.

• 한국지능정보시스템학회:학술대회논문집
• /
• 한국지능정보시스템학회 1999년도 춘계공동학술대회-지식경영과 지식공학
• /
• pp.253-260
• /
• 1999

The recycling cell formation problem means that disposal products are classified into recycling part families using group technology in their end of life phase. Disposal products have the uncertainties of product status by usage influences during product use phase and recycling cells are formed design, process and usage attributes. In order to treat the uncertainties, fuzzy set theory and fuzzy logic-based neural network model are applied to recycling cell formation problem for disposal products. In this paper, a heuristic approach for fuzzy ART neural network is suggested. The modified Fuzzy ART neural network is shown that it has a great efficiency and give an extension for systematically generating alternative solutions in the recycling cell formation problem. We present the results of this approach applied to disposal refrigerators and the comparison of performances between other algorithms. This paper introduced a procedure which integrates economic and environmental factors into the disassembly of disposal products for recycling in recycling cells. A qualitative method of disassembly analysis is developed and its aim is to improve the efficiency of the disassembly and to generated an optimal disassembly which maximize profits and minimize environmental impact. Three criteria established to reduce the search space and facilitate recycling opportunities.

• 한국환경과학회지
• /
• 제30권1호
• /
• pp.45-55
• /
• 2021

In this study, the odor of the parts and the odor of the surrounding environment were classified and verified. In order to increase the reliability of odor quantitative/qualitative analysis, the selection criteria for 5 sensory evaluators were established, and the n-Butanol control solution for each odor intensity was periodically trained to recognize the odor intensity before sensory evaluation. In addition, although various odor thresholds have been used through several studies, verification of whether the odor intensity value obtained through GC/MSD analysis is similar to the degree to which a person directly smells and feels it. It is important to select the odor threshold that has the best correlation with the odor intensity calculated by the person smelling the odor. Finally, sampling and measuring flowing airflow and temporary odors such as odor component analysis was experimentally difficult due to limited collection space and differences in concentration of generated components. In this study, a quantitative analysis was made possible by using the low temperature concentration (cooling) trap method. Through this, it was confirmed that the correlation with the actual odor intensity was not caused by the product itself, but by the environmental factor discharged from the product after creating the odor environment.

• The International Journal of Costume Culture
• /
• 제12권1호
• /
• pp.71-84
• /
• 2009

For fit satisfaction evaluation, the subjects were asked to put on the jackets from the seven manufacturers in random order, view how the jackets fit in a full-body mirror and answer questions regarding fitting in 22 specific areas, including the neck, shoulders, waist, hips and arms, as well as eight questions related to maneuverability. The surveys and evaluations were conducted between October 2007 and November 2008, and the compiled data were analyzed using the SPSS 14.0 statistics program. The One-way analysis of variance was performed to comparatively analyze the differences among the products from the seven manufacturers. Post-hoc tests were performed based on Duncan's test for the criteria that displayed significant differences. The results were summarized as follows. Fit evaluations were performed for the size 88 formal jackets from the seven manufacturers. All items, except the center front line, displayed significant differences at p<0.05 or higher among the manufacturers. The age group 20-39 felt that the main problems were in the shoulder, armscye, upper arm, waist, abdomen and hip areas. Modifying the shoulder area, armscye depth and hip areas severely compromises the jacket's balance, and attention to these areas must be given developed pattern design.

• 디자인학연구
• /
• 제16권2호
• /
• pp.375-384
• /
• 2003

본 연구는 성공적인 기업 브랜드 이미지의 구축을 위한 전략으로서 브랜드 인지도에 의한 제품가치의 향상의 필요성을 확인하고 그 실행 방법으로서 크게 브랜드 이미지 분석과 이를 바탕으로 하는 제품 이미지 프로그래밍, 그리고 제품 이미지의 정합성 평가와 관리의 세 단계로 구성되는 제품 이미지 집중 체계 (PICS : Product Image Concentration System)를 제안하여 기업의 경쟁력 강화와 브랜드 관리를 위한 지침으로 활용하도록 하는 데 그 목적이 있다. 먼저 브랜드 이미지 분석은 이미지 연상기법을 통하여 브랜드 이미지의 성향을 파악하는 방법으로서, 제시된 시각적 자료와의 관여방식을 분석하여 기업이미지와 브랜드 이미지의 인지 방향을 측정하고 분석한다. 다음으로 제품 이미지 프로그래밍은 이와 같은 브랜드 이미지에 대한 분석을 바탕으로 디자인철학(Design Philosophy)과 디자인 원칙(Design Principles)을 정립하고, 비쥬얼 포지션 프로그래밍(Visual Position Programming)을 통하여 제품이미지의 지향방향을 가시화 하는 과정이다. 마지막으로 제품이미지 정합성 평가는 디자인 철학과 디자인 원칙의 적용 여부 등을 평가하여 브랜드에 정합한 디자인을 개발할 수 있도록 평가의 기준점을 제시하기 위한 것이다. 이와 같은 제품 이미지 집중 체계 (PICS : Product Image Concentration System)는 기업의 경쟁력 강화와 브랜드 관리를 위한 실제적인 방법으로서 디자인 작업에 있어서 이미지의 주관성으로 인한 계획과 적용 그리고 관리의 문제를 보다 객관적으로 해결하는 지침으로 활용될 수 있을 것으로 기대되며, 향후 표현중심어에 따른 이미지 스펙트럼의 세분화와 이미지의 비교 분석, 또 여기에 나타난 시각적 질서를 규명하는 제품 이미지 해석 프로그램에 대한 연구가 지속되어야 할 것이다.

• 한국산학기술학회논문지
• /
• 제15권8호
• /
• pp.4987-4998
• /
• 2014

최근 공산품에 나노기술의 활용이 점점 확대되고 다양한 나노제품이 출시되면서 나노물질의 인체 및 환경에 대한 유해성 문제가 주요한 사안으로 대두되고 있다. 이러한 위험성을 인식하여 EU 및 미국 등에서는 나노물질에 대한 규제를 강화하는 추세이다. 그러나 현재 국내에는 나노관련 법규가 미흡한 형편이다. 무엇보다도 소비자에게 밀접한 공산품의 나노물질 규제정책은 소비자의 안전을 위해 시급히 요구되고 있다. 이에 따라 본 연구에서는 규제정책 도입을 위한 기반연구로서 공산품에 함유된 나노물질에 대한 규제정책 도입을 위한 분석을 실시한다. 본 연구에서는 AHP(Analytic Hierarchy Process) 기법을 적용하여 규제정책을 평가하고 가장 적합도가 높은 최적 규제정책을 선택한다. 규제정책은 자율규제, 제품라벨링, 정부등록제를 대상으로 하며 정책평가기준은 시행성(효과성), 경제성, 수용성, 보호성으로 설정한다. 평가 결과 최대 적합도를 가지는 제품라벨링 정책을 최적 규제정책으로 선택한다.

• 정보처리학회논문지D
• /
• 제13D권1호
• /
• pp.51-60
• /
• 2006

제품 계열 공학(Product Line Engineering, PLE)은 도메인에서 멤버들이 갖는 공통 휘처를 재사용 가능한 핵심 자산으로 만들고, 만들어진 핵심 자산을 이용해서 애플리케이션을 개발하는 방법론이다. PLE는 핵심 자산을 개발해서 재사용하므로, 개발비용을 감소시키며 자산의 재사용성을 증가시킬 수 있다. 지금까지 여러 개의 PLE 방법론이 소개되었으나, 표준화된 PLE 방법론이 존재하지 않기 때문에, 방법론이 제시하는 프로세스나 산출물 등에서 차이가 크며, 산업계에서는 PLE 방법론을 채택하는데 어려움이 있다. 이에 프로세스의 선택과 효율적인 활용을 위해서 기존의 여러 방법론을 비교 분석하는 작업이 요구된다. 본 논문에서는 FAST, SEI SPL, PuLSE, Bosch의 제품 계열 프로세스, FOPLE, ESAPS, KobrA/PoLITe, Alexandria COPA, QADA 방법론 등 대표적인 PLE 방법론을 프로세스, 산출물, 적용 지침 측면 별로 비교 기준을 나누고, 비교 기준에 따라서 비교 평가를 수행한다. 또한 방법론간 공통성이 큰 항목과 적은 항목을 확인해서, PLE 방법론이 포함해야 하는 요소와 각 방법론이 개선해야 하는 사항을 확인한다. 본 논문은 적절한 프로세스를 선택 또는 재정의하는 과정에서 활용할 수 있을 뿐만 아니라, 향후 PLE 개발 방범론의 표준을 정의하는 과정에서 기반이 될 수 있을 것이다.