• Journal of Life Science
• /
• v.33 no.11
• /
• pp.923-935
• /
• 2023

Rubus crataegifolius (RC), Ulmus macrocarpa (UM), and Gardenia jasminoides (GJ) are well-known folk medicines in Asia used to treat various gastrointestinal disturbances. The present study evaluated the gastroprotective effect of LS-RUG-com, a mixture of commercially prepared powders of RC, UM, and GJ with a ratio of 3:1:2(w/w/w) against HCl/ethanol-induced gastritis, indomethacin-induced ulcers, and esophageal reflux-induced esophageal mucosal damage and Helicobacter pylori infections. In addition, TNF-α and IL-1β expressions were also determined and measured in esophageal tissue. As to HCl/ethanol-induced gastritis, the LS-RUG-com treatment at a dose of 150 mg/kg showed a remarkable anti-gastritis effect. Regarding indomethacin-induced gastric ulcers, the LS-RUG-com treatment had a significant anti-gastric ulcer effect. Furthermore, in the gastroesophageal reflux disease (GERD) model experiment, the LS-RUG-com treatment resulted in the histological recovery of stomach damage and mucosal injuries. Furthermore, the LS-RUG-com treatment led to an increase in gastric content pH, an increase in mucus protection, and a decrease in gastric pepsin output with a significant decrease in TNF-α and IL-1β. As to the Helicobacter pylori infected animal model, LS-RUG-com had a notable inhibitory effect on Helicobacter growth. The use of RC, UM, or GJ in isolation or the LS-RUG-com treatment as whole had good effects in terms of anti-oxidation, anti-neutralization, gastric acid secretion inhibition, and anti-lipid peroxidation, which supported the use of natural products as systemic gastric protective agents. Our results suggest that the LS-RUG-com might be a significant systemic gastroprotective agent that could be utilized for the treatment and/or protection from gastric disturbances and related damage.

• Journal of the Society of Disaster Information
• /
• v.19 no.4
• /
• pp.976-983
• /
• 2023

Purpose: The dynamic behavior of a bridge structure under seismic loading depends on many uncertainties, such as the nature of the seismic waves and the material and geometric properties. However, not all uncertainties have a significant impact on the dynamic behavior of a bridge structure. Since probabilistic seismic performance evaluation considering even low-impact uncertainties is computationally expensive, the uncertainties should be identified by considering their impact on the dynamic behavior of the bridge. Therefore, in this study, a global sensitivity analysis was performed to identify the main parameters affecting the dynamic behavior of bridges with I-curved girders. Method: Considering the uncertainty of the earthquake and the material and geometric uncertainty of the curved bridge, a finite element analysis was performed, and a surrogate model was developed based on the analysis results. The surrogate model was evaluated using performance metrics such as coefficient of determination, and finally, a global sensitivity analysis based on the surrogate model was performed. Result: The uncertainty factors that have the greatest influence on the stress response of the I-curved girder under seismic loading are the peak ground acceleration (PGA), the height of the bridge (h), and the yield stress of the steel (fy). The main effect sensitivity indices of PGA, h, and fy were found to be 0.7096, 0.0839, and 0.0352, respectively, and the total sensitivity indices were found to be 0.9459, 0.1297, and 0.0678, respectively. Conclusion: The stress response of the I-shaped curved girder is dominated by the uncertainty of the input motions and is strongly influenced by the interaction effect between each uncertainty factor. Therefore, additional sensitivity analysis of the uncertainty of the input motions, such as the number of input motions and the intensity measure(IM), and a global sensitivity analysis considering the structural uncertainty, such as the number and curvature of the curved girders, are required.

• Journal of Venture Innovation
• /
• v.4 no.1
• /
• pp.51-65
• /
• 2021

The HR policy in the public sector was closed and operated mainly on written tests, but in 2006, a new evaluation, promotion and education system based on competence was introduced in the promotion and selection system of civil servants. In particular, the seniority-oriented promotion system was evaluated based on competence by operating an Assessment Center related to promotion. Competency evaluation is known to be the most reliable and valid evaluation method among the evaluation methods used to date and is also known to have high predictive feasibility for performance. In 2001, 19 government standard competency models were designed. In 2006, the competency assessment was implemented with the implementation of the high-ranking civil service team system. In the public sector, the purpose of the competency evaluation is mainly to select third-grade civil servants, assign fourth-grade civil servants, and promotion fifth-grade civil servants. However, competency assessments in the public sector differ in terms of competency assessment objectives, assessment processes and competency assessment programmes compared to those in the private sector. For the purposes of competency assessment, the public sector is for the promotion of candidates, and the private sector focuses on career development and fostering. Therefore, it is not continuously developing capabilities than the private sector and is not used to enhance performance in performing its duties. In relation to evaluation items, the public sector generally operates a system that passes capacity assessment at 2.5 out of 5 for 6 competencies, lacks feedback on what competencies are lacking, and the private sector uses each individual's competency score. Regarding the selection and operation of evaluators, the public sector focuses on fairness in evaluation, and the private sector focuses on usability, which is inconsistent with the aspect of developing capabilities and utilizing human resources in the right place. Therefore, the public sector should also improve measures to identify outstanding people and motivate them through capacity evaluation and change the operation of the capacity evaluation system so that they can grow into better managers through accurate reports and individual feedback

• Journal of Venture Innovation
• /
• v.5 no.4
• /
• pp.109-115
• /
• 2022

As the 4th industrial revolution progresses, foreign countries are promoting smart manufacturing innovation through digital transformation as a priority task early on to secure a competitive edge in the manufacturing industry. In response, the Korean government is also promoting a policy to enhance the competitiveness of small and medium-sized manufacturing companies by promoting digital transformation in the corporate sector to meet the global trend of the 4th industrial revolution era. Manufacturing powerhouses such as Germany and Japan see manufacturing as a key sector in digital transformation and are leading related policies, while emerging countries such as China are also promoting manufacturing innovation strategies such as building digital infrastructure and creating a digital innovation ecosystem. Korea is promoting the 'Korean-style smart factory dissemination and expansion strategy' by transforming Germany's manufacturing innovation strategy for smart factory supply to suit the domestic situation. However, the policy to supply smart factories so far has been conducted with support from individual companies under the leadership of the government, and most of the smart factories are at the basic level, and it is evaluated that there are limitations such as the lack of manpower to operate smart factories. In addition, while the current policy focuses on expanding the supply of smart factories in SMEs, it is necessary to establish a smart manufacturing system through linkages between large and small businesses in order to achieve the original goal of establishing a smart manufacturing system. Therefore, it can be said that from the standpoint of small and medium-sized enterprises (SMEs), who are consumers of smart factories, it can be said that the digital transformation policy can achieve the expected results only when appropriate incentives are provided for the introduction of smart factories in a situation where management resources such as funds, technology, and human resources are lacking. In addition, it is judged that the uncertainty of the performance of digital investment always exists, and as long as large and small companies are maintained as an ecosystem of delivery and subcontracting, there is very little incentive for small and medium-sized manufacturing companies to voluntarily invest in or advance digital transformation. Therefore, the digital transformation policy of small and medium-sized manufacturing companies in the future has practical significance in that it suggests that there is a need to seek ways to attract SMEs' digital-related voluntary investment.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_3
• /
• pp.979-995
• /
• 2023

As wildfires are difficult to predict, real-time monitoring is crucial for a timely response. Geostationary satellite images are very useful for active fire detection because they can monitor a vast area with high temporal resolution (e.g., 2 min). Existing satellite-based active fire detection algorithms detect thermal outliers using threshold values based on the statistical analysis of brightness temperature. However, the difficulty in establishing suitable thresholds for such threshold-based methods hinders their ability to detect fires with low intensity and achieve generalized performance. In light of these challenges, machine learning has emerged as a potential-solution. Until now, relatively simple techniques such as random forest, Vanilla convolutional neural network (CNN), and U-net have been applied for active fire detection. Therefore, this study proposed an active fire detection algorithm using state-of-the-art (SOTA) deep learning techniques using data from the Advanced Himawari Imager and evaluated it over East Asia and Australia. The SOTA model was developed by applying EfficientNet and lion optimizer, and the results were compared with the model using the Vanilla CNN structure. EfficientNet outperformed CNN with F1-scores of 0.88 and 0.83 in East Asia and Australia, respectively. The performance was better after using weighted loss, equal sampling, and image augmentation techniques to fix data imbalance issues compared to before the techniques were used, resulting in F1-scores of 0.92 in East Asia and 0.84 in Australia. It is anticipated that timely responses facilitated by the SOTA deep learning-based approach for active fire detection will effectively mitigate the damage caused by wildfires.

• Journal of the Korean Society of Radiology
• /
• v.17 no.5
• /
• pp.641-649
• /
• 2023

This study compares and analyzes the performance of a shield manufactured using 3D printing technology to find out its applicability as a shield in high-energy electron beam therapy. Actual measurement and monte carlo simulations were performed to evaluate the shielding performance of 3D printing materials for high-energy electron beams. First, in order to secure reliability for the simulation, a source term evaluation was conducted by referring to the IAEA's TRS-398 recommendation. Second, to analyze the shielding performance of PLA+W (93%), a specimen was manufactured using a 3D printer, and the shielding rate by thickness according to electron beam energy was evaluated. Third, the shielding thickness required for electron beam treatment was calculated through a comparative analysis of shielding performance between PLA+W (93%) and existing shielding bodies. First, as a result of the evaluation of the source term through actual measurement and simulation, the TRS-398 recommendation was satisfied with an error of less than 1%, thereby securing the reliability of the simulation. Second, as a result of the shielding performance analysis for PLA+W (93%), 6 MeV electron beams showed a shielding rate of more than 95% at 3.12 mm, and 15 MeV electron beams showed a shielding rate of more than 90% at 10 mm thickness. Third, through simulations, comparative analysis between PLA+W (93%) materials and existing shields showed high shielding rates within the same thickness in the order of tungsten, lead, copper, PLA+W (93%), and aluminum. 6 MeV electron beams showed almost similar shielding rates at 5 mm or more and 15 MeV electron beams. Through this study in the future, it is judged that it can be used as basic data for the production and application of shielding bodies using PLA+W (93%) materials in high-energy electron beam treatment.

• Journal of the Korean Society of Radiology
• /
• v.17 no.5
• /
• pp.767-773
• /
• 2023

To In this study, we sought to evaluate related factors affecting lung volume and their significance in pulmonary function and ventilation disorders. As experimental subjects, 206 normal adult men and women who underwent a low-dose chest CT scan and a spirometry test were selected at the same time. The experimental method was to measure lung volume using lung CT images obtained through a low-dose chest CT scan using deep learning-based AVIEW. Measurements were made using the LCS automatic diagnosis program. In addition, the results of measuring lung function were obtained using a spirometer, and gender and BMI were selected as related factors that affect lung volume, and significance was evaluated through an independent sample T-test with lung volume. As a result of the experiment, it was confirmed that in evaluating lung volume according to gender, all lung volumes of men were larger than all lung volumes of women. he result of an independent samples T-test using the respective average values for gender and lung volume showed that all lung volumes were larger in men than in women, which was significant (p<0.001). And in the evaluation of lung volume according to BMI index, it was confirmed that all lung volumes of adults with a BMI index of 24 or higher were larger than all lung volumes of adults with a BMI index of less than 24. However, the independent samples T-test using the respective average values for BMI index and lung volume did not show a significant result that all lung volumes were larger in BMI index 24 or higher than in BMI index less than 24 (p<0.055). In the evaluation of lung volume according to the presence or absence of pulmonary ventilation impairment, it was confirmed that all lung volumes of adults with normal pulmonary function ventilation were larger than all lung volumes of adults with pulmonary ventilation impairment. And as a result of the independent sample T-test using the respective average values for the presence or absence of pulmonary ventilation disorder and lung volume, the result was significant that all lung volumes were larger in adults with normal pulmonary function ventilation than in adults with pulmonary function ventilation disorder (p <0.001). Lung volume and spirometry test results are the most important indicators in evaluating lung health, and using these two indicators together to evaluate lung function is the most accurate evaluation method. Therefore, it is expected that this study will be used as basic data by presenting the average lung volume for adults with normal ventilation and adults with impaired lung function and ventilation in similar future studies on lung volume and vital capacity testing.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.68 no.3
• /
• pp.134-146
• /
• 2023

Phytophthora root rot (PRR) is a major soybean disease caused by an oomycete, Phytophthora sojae. PRR can be severe in poorly drained fields or wet soils. The disease management primarily relies on resistance genes called Rps (resistance to P. sojae). This study aimed to identify resistance loci associated with resistance to P. sojae isolate 40468 in Daepung × CheonAl recombinant inbred line (RIL) population. CheonAl is resistant to the isolate, while Daepung is generally susceptible. We genotyped the parents and RIL population via high-throughput single nucleotide polymorphism genotyping and constructed a set of genetic maps. The presence or absence of resistance to P. sojae was evaluated via hypocotyl inoculation technique, and phenotypic distribution fit to a ratio of 1:1 (R:S) (χ² = 0.57, p = 0.75), indicating single gene mediated inheritance. Single-marker association and the linkage analysis identified a highly significant genomic region of 55.9~56.4 megabase pairs on chromosome 18 that explained ~98% of phenotypic variance. Many previous studies have reported several Rps genes in this region, and also it contains nine genes that are annotated to code leucine-rich repeat or serine/threonine kinase within the approximate 500 kilobase pairs interval based on the reference genome database. CheonAl is the first domestic soybean genotype characterized for resistance against P. sojae isolate 40468. Therefore, CheonAl could be a valuable genetic source for breeding resistance to P. sojae.

• Journal of Nutrition and Health
• /
• v.56 no.5
• /
• pp.483-495
• /
• 2023

Purpose: The purpose of this study was to determine whether the dietary quality of food consumed by the elderly is influenced by the consumption of healthy functional foods using Nutrition Quotients for the Elderly (NQ-E). Methods: The study subjects were 250 adults aged ≥ 65 living in Seoul or Gyeonggi-do. Those who had consumed healthy functional food for more than 2 weeks within the previous year were classified as healthy functional food consumers, and the quality of their meals was evaluated using the NQ-E. Statistical analysis was performed using SAS 9.4, and sex and age-associated differences were adjusted before comparing differences based on healthy functional food intake. Results: The average age of the study subjects was 70.8. The scores for each area and the Nutrition Quotient (NQ) score were as follows: balance 43.3 points, moderation 56.7 points, practice 65.7 points, and NQ 52.5 points. When comparing differences according to healthy functional food intake status, healthy functional food consumers had significantly higher balance and NQ scores than non-consumers. When considering each NQ item score, healthy functional food consumers had significantly higher scores than non-consumers for fruit, fish and seafood, eggs, nuts, and whole grain rice, and a higher score for effort to maintain a healthy diet. Conclusion: Dietary quality as assessed by Nutrition Quotients for the Elderly was better for healthy functional food consumers than non-consumers.

• Korean Journal of Poultry Science
• /
• v.50 no.4
• /
• pp.311-323
• /
• 2023

This study aimed to investigate the impact of Bacillus subtilis-based probiotics and oregano essential oil on the production performance, egg quality, and intestinal morphology of late-phase laying hens (69-weeks). A total of 150 laying hens of 69-week-old were randomly allotted into 6 treatment groups with 5 replicates of 5 birds in each replicate. Laying hens were divided into high (H) and average (A) egg production groups prior to the trial. The hens in each group were supplemented with Bacillus subtilis, or oregano essential oil: CON, a basal diet; BS, basal diet plus 3 × 10⁸ CFU/kg feed Bacillus subtilis; OEO, basal diet plus 0.3 g/kg feed oregano essential oil. Egg performance, blood characteristics, egg quality, and intestinal morphology of the late-phase laying hens were evaluated. Both BS and OEO significantly enhanced (P<0.05) egg production compared to CON in high egg production. The blood characteristics indicated no significant differences based on the egg production and the supplementation of BS and OEO in the late-phase laying hens. The eggshell strength was significantly improved (P<0.05) in both OEO compared to both CON. A significantly decreased (P<0.05) the villus height to crypt depth ratio (VH/CD) in the ileum compared to H, and in the treatment groups supplemented with BS and OEO, VH/CD showed a significant increase (P<0.05) compared to both CON. These results suggest that the supplementation of Bacillus subtilis and oregano essential oil in the diet of late-phase laying hens could serve as a potential strategy to enhance egg production, egg quality, and gut health.