• Korean Journal of Pharmacognosy
• /
• v.43 no.2
• /
• pp.107-121
• /
• 2012

Twenty-five compounds were isolated from the methanolic extract of Geum japonicum (Rosaceae), and their structures were identified as eleven triterpenoids [ursolic acid 3-acetate (2), cecropiacic acid 3-methyl ester (3), pomolic acid 3-acetate (5), ursonic acid (6), ursolic acid (7), pomolic acid (8), corosolic acid (9), euscaphic acid (11), arjunic acid (16), tormentic acid (18), 23-hydroxytormentic acid (21)], two saponins [rosamultin (22) and kaji-ichigoside $F_1$ (23)], two megastigmanes [blumenol A (14) and (+)-dehydrovomifoliol (15)], three flavonoids [apigenin (13), isoquercitrin (17) and tiliroside (24)], two ellagic acid derivatives [3,3'-di-O-methylellagic acid (12) and ducheside B (25)] and five others [eugenol (1), emodin (4), vanillic acid (10), gallic aldehyde (19), salidroside (20)]. The chemical structures of these compounds were identified on the basis of spectroscopic methods and comparison with literature values. This is the first report of the eleven compounds, 2~6, 10, 15, 16, 20, 23, and 25 from the genus Geum, as well as the first report of apigenin (13) and 3,3'-di-O-methylellagic acid (12) from G. japonicum. The antioxidant properties of 22 isolates (1~11, 14, 16~25) were evaluated by the intracellular reactive oxygen species (ROS) radical scavenging using 2',7'-dichlorodihydrofluorescein diacetate (DCF-DA) assay. Among them, isoquercitrin (17) showed significant scavenging activity, and gallic aldehyde (19) and ducheside B (25) showed weak scavenging activity.

• Natural Product Sciences
• /
• v.19 no.1
• /
• pp.20-27
• /
• 2013

A simple high performance liquid chromatography - diode array detector (HPLC-DAD) method has been developed and validated for simultaneous determination of the six components (cinnamic acid, cinnamaldehyde, eugenol, atractylenolide I, atractylenolide III, and ergosterol) in Oryeongsan. In addition, identification of six marker compounds was conducted by a LC-MS/MS analysis. The six compounds in Oryeongsan were separated on Shishedo $C_{18}$ column (5 ${\mu}m$, $4.6{\times}250$ mm) at a column temperature of $30^{\circ}C$. The mobile phase was a mixture of 0.1% trifluoroacetic acid (TFA) water and acetonitrile employing gradient elution at a flow rate of 1.0 mL/min. The detection wavelength was set at 205, 250, 280, and 330 nm. The developed method had good linearity ($R^2$ > 0.9997) and the limit of detection (LOD) and limit of quantification (LOQ) were observed within the ranges 0.01~0.15 and 0.05~0.45 ${\mu}g/mL$, respectively. The relative standard deviation (RSD) values of intra- and inter-day testing were indicated that less than 3% and 90.31~103.31% of accuracy. The results of recovery test were 90.56~106.72% and RSD range was measured from 0.84 to 2.95%. In conclusion, this HPLC-DAD method has been successfully applied to the simultaneous determination of six compounds in Oryeongsan samples.

• Food Science and Biotechnology
• /
• v.14 no.5
• /
• pp.634-638
• /
• 2005

The effects of ingredients added (first cutting ingredients vs. both first and second cutting ingredients), and cooking method (smoking vs. boiling) on product quality and volatile compounds were examined for low-fat and regular-fat sausages. Regular-fat sausages had slightly higher pH values (6.2-6.3) than those (6.1-6.2) of low-fat counterparts. However, the pH values of the sausages were not significantly affected by the different ingredients and cooking methods (p>0.05). Approximately 30 volatile compounds were identified from these comminuted sausages. The headspace concentrations of 4-methyl-1-[1-methylethyl]-3-cyclohexen-1-ol, ${\alpha}$- terpenyl acetate, eugenol, trans-caryophyllene and myristicine were lower in low-fat and regular-fat sausages containing the first cutting ingredients alone, than in those with both cutting ingredients. The volatile compounds of the smoked comminuted sausages were mostly phenols and hetero-compounds, and a lot of volatile compounds were shown before the retention time (RT) of 30 min. However, not many volatile compounds were detected in the boiled sausages prior to the RT of 30 min.

• Restorative Dentistry and Endodontics
• /
• v.8 no.1
• /
• pp.161-166
• /
• 1982

The purpose of this study was to examine the influence of canal preparation on the property of apical seal. Seventy canals from extracted human maxillary and mandibular teeth were randomly selected and divided into two groups: conventional group and step-back group. Thirty five canals in one group were enlarged with a, conventional preparation method and thirty five canals in the other group were instrumented in a step-back method with K-file. After instrumentation sixty canals were obturated by lateral condensation of gutta percha and zinc oxide eugenol cement, and five canals in each group were not filled and used as control. All the specimens were immersed in 2% methylene blue dye solution and the depth of dye penetration into the canals were observed by macroscope at the intervals of 1 day, 2 days, and 7 days. The following results were obtained. 1. All the canals experimented showed varying degrees of dye penetration. 2. There was no significant difference between conventional method and step-back method in the depth of dye penetration and the degree of dye penetration tended to increase with time passage in both groups. 3, In conventional preparation group the mean dye penetration was 3.6mm at 1 day, 4.8mm at 2 days. and 6.5mm at 7 days. 4. In step-back prepareation group, the specimens exposed to the dye for 1 day showed mean dye penetration of 4.1mm, and the specimens immersed in the dye for 2 days and 7 days revealed mean dye penetration of 4.6mm and 6.2mm respectively.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.4
• /
• pp.233-238
• /
• 2020

PURPOSE. This study aims to compare the marginal fitness of two types of implant-supported fixed dental prosthesis, i.e., cementless fixation (CL.F) system and cement-retained type. MATERIALS AND METHODS. In each group, ten specimens were assessed. Each specimen comprised implant lab analog, titanium abutment fabricated with a 2-degree tapered axial wall, and zirconia crown. The crown of the CL.F system was retained by frictional force between abutment and relined composite resin. In the cement-retained type, zinc oxide eugenol cement was used to set crown and abutment. All specimens were sterilized with ethylene oxide, immersed in Prevotella intermedia culture in a 50 mL tube, and incubated with rotation. After 48 h, the specimens were washed thoroughly before separating the crown and abutment. The bacteria that penetrated into the crown-abutment interface were collected by washing with 500 µL of sterile saline. The bacterial cell number was quantified using the agar plate count technique. The BacTiter-Glo Microbial Cell Viability Assay Kit was used to measure bacterial adenosine triphosphate (ATP)-bioluminescence, which reflects the bacterial viability. The t-test was performed, and the significance level was set at 5%. RESULTS. The number of penetrating bacterial cells assessed by colony-forming units was approximately 33% lower in the CL.F system than in the cement-retained type (P<.05). ATP-bioluminescence was approximately 41% lower in the CL.F system than in the cement-retained type (P<.05). CONCLUSION. The CL.F system is more resistant to bacterial penetration into the abutment-crown interface than the cement-retained type, thereby indicating a precise marginal fit.

• Restorative Dentistry and Endodontics
• /
• v.26 no.5
• /
• pp.379-386
• /
• 2001

This study was performed to evaluate the sealing ability of various retrograde filling materials by using bacterial penetration and dye penetration test. One hundred and forty extracted human teeth with single, straight canals and mature apiece were collected and used for this study. All canals were instrumented using an engine driven Ni-Ti file (ProFile). After removing 3mm from the apex of tooth, a standardized 3mm root end cavity was prepared using an ultrasonic instrument. The 70 teeth were randomly divided into 7 groups : 6 groups for retrograde filling using Super-EBA, ZOE, Chelon-Silver, IRM, ZPC and amalgam. The 7th group was used as a negative control. Nail varnish was applied to all external root surfaces to the level of the reseated root ends to prevent lateral microleakages. The specimens were then sterilized in an ethylene oxide sterilizer for 24 hours. 2 mm of the reseated root was immersed in a culture chamber containing a Tripticase Soy Broth with a phenol red indicator. The coronal access of each specimen was inoculated every 72 hours with suspension of Proteus vulgaris. The culture media were observed every 24hours for color change indicating bacterial contamination. The specimens were observed for 4weeks. The remaining 70 teeth were submitted to a dye penetration test. The canals of all teeth were first sealed with AH26 and obturated using an Obtura II system. Root resection, root end preparation and retrograde filling was performed as above. All specimens were suspended in 2% methylene blue dye for 72 hours before being ion gitudinally split. The degree of dye penetration was then measured using a stereomicroscope at 10 magnification and evaluated. The results were as floows : 1. In the bacterial penetration, the degree of leakage was the lowest in the Super-EBA, followed by, in ascending order, ZOE, Chelon-Silver IRM and ZPC. The amalgam showed highest bacterial leakage of all(p<0.01). 2. In the dye penetration, the degree of microleakage was the lowest in the Chelon-Silver and Super-EBA, followed by, in ascending order, IRM, ZPC. The ZOE and amalgam showed the highest microleakage of all (p<0.05). These results suggested that the eugenol based cement, Super-EBA, have excellent sealing ability as a retrograde filling material.

• Weed & Turfgrass Science
• /
• v.4 no.4
• /
• pp.321-329
• /
• 2015

The present study aimed to evaluate the phytotoxic potential of essential oils. For this purpose, 18 essential oil samples extracted from Korean plants and 64 commercial essential oils were screened for their phytotoxic potential against the seedling growth of Brassica napus L. (rapeseed). Among the 82 samples, 11 commercial oils (cinnamon, citronella, clove, cumin seed, geranium, jasmine, lemongrass, palmarosa, pimento, rose otto and spearmint) strongly inhibited the seedling growth with $GR_{50}$ value < $150{\mu}g\;mL^{-1}$. Major components from these effective essential oils were identified by solid phase microextraction/gas chromatography-mass spectrometry (SPME/GC-MS). GC-MS analyses revealed that the effective samples mainly consist of benzyl benzoate, carvone, citral, citronellol, eugenol, geraniol, D-limonene and terpinene. Subsequently, bioactivity of these individual components was evaluated against the seedling growth of B. napus, Echinochloa crus-galli and Aeschynomene indica. The components from different chemical groups exhibited different potency in inhibiting the seedling growth with varied $GR_{50}$ values ranged from $29{\mu}g\;mL^{-1}$ to > $1000{\mu}g\;mL^{-1}$. In the greenhouse experiment, citral and geraniol completely suppressed the growth of all the tested 10 plants at $100kg\;ha^{-1}$. In conclusion, the individual essential oil components geraniol and citral could be used as natural herbicides for weed management.

• Restorative Dentistry and Endodontics
• /
• v.1 no.1
• /
• pp.26-32
• /
• 1975

After a vital pulpotomy in dogs' teeth, the responses of the remaining pulp tissue under hydroxides (calcium hydroxide, magnesium hydroxide, aluminium hydroxide and zinc hydroxide) were studied histologically. The class V cavities were prepared on the teeth and the pulp was amputated. Each hydroxide was placed over the amputated tissue and the cavity was sealed with zinc oxide eugenol cement. Animals were sacrificed after 3 days, 1, 2, and 3 weeks following the operation. The teeth were decalcified, sectioned and stained with hematoxylin and eosin. Microscopic examination reveals as follows; 1. Calcium hydroxide: Inflammatory change was seen in the superficial portion of the remaining pulp tissue at the 3rd day and 1st week. The incompleted calicified material began to be deposited from the canal wall at the 2nd week, and the advanced calcified material was seen at the 3rd week. 2. Magnesium hydroxide: Severe inflammatory change was seen in the superficial portion of the remaining pulp from the 3rd day and the 1st week samples. Inflammatory change was decreased at the 2nd week and the slight calcified material was deposited from the root canal at the 3rd week. 3. Aluminium hydroxide: Severe inflammatory changes were seen in the remaining pulp tissue, the blood vessel was dilated, and the odontoblasts were destroyed at the 3rd day and 1st week. The fibrous degeneration spread to the apex at the 2nd week. There was no evidence of newly formed odontoblasts or deposition of calcified material underneath aluminium hydroxide. 4. Zinc hydroxide: The micrscopic picture was destructive. A thick necrotic layer was found under the amputated surface at the 3rd day and 1st week. Granulation tissue formation as well as chronic inflammatory changes extended to the apical area in the pulp tissue. Also there were no sign of odontoblastic formation or calcified material at the 2nd and 3rd week.

• Restorative Dentistry and Endodontics
• /
• v.3 no.1
• /
• pp.17-21
• /
• 1977

After a vital pulpotomy in dogs' teeth, the responses of the remaining pulp tissue under calcium hydroxide and formocresol were studied histologically. The class I and V cavities were prepared on the teeth and the pulp was amputated. Calcium hydroxide and formocresol were placed over the amputated tissue and the cavities were sealed with zine oxide eugenol cement and zinc phosphate cement. Animals. were sacrifice after 1, 2, and 3 weeks following the operation. The teeth were decalcfied, sectioned and stained with hematoxylin and eosin. Microscopic examination reveals as follows; 1. Healing of the pulp at the amputation site did not occur in the pulps treated with formocresol. 2. At one week, a thin layer of darker staining tissues just below the necrotic zone was presented in the pulps treated with formocresol. In this stage the tissues beneath the darker staining layer were normal. 3. At two weeks, the cells of the palest staining layer were showed indistinct nucleus which suggested the karyolysis and the karyorrhexis in the pulps treated with formocoresol. As reached to the middle third of the pulp, the odontoblasts were scarcely evident or missed in this stage. 4. At three weeks, the necrotic zone was reached to the middle third of the pulp canal. The cells beneath the zone showed massive infiltration of inflammatory cells in the pulps treated with formocresol. 5. Dentin bridge in the control group was deposited below the necrotic zone from the two. weeks later. 6. Normal tissues were observed ill the apical third of all. the dental pulps in all case of calcium hydroxide and formocresol.

• The Journal of Advanced Prosthodontics
• /
• v.4 no.4
• /
• pp.192-196
• /
• 2012

PURPOSE. The purpose of this study was to evaluate the effect of provisional cement removal by different dentin cleaning protocols (dental explorer, pumice, cleaning bur, Er:YAG laser) on the shear bond strength between ceramic and dentin. MATERIALS AND METHODS. In total, 36 caries-free unrestored human third molars were selected as tooth specimens. Provisional restorations were fabricated and cemented with eugenol-free provisional cement. Then, disc-shaped ceramic specimens were fabricated and randomly assigned to four groups of dentin cleaning protocols (n = 9). Group 1 (control): Provisional cements were mechanically removed with a dental explorer. Group 2: The dentin surfaces were treated with a cleaning brush with pumice Group 3: The dentin surfaces were treated with a cleaning bur. Group 4: The provisional cements were removed by an Er:YAG laser. Self-adhesive luting cement was used to bond ceramic discs to dentin surfaces. Shear bond strength (SBS) was measured using a universal testing machine at a 0.05 mm/min crosshead speed. The data were analyzed using a Kolmogorov Smirnov, One-way ANOVA and Tukey HSD tests to perform multiple comparisons (${\alpha}$=0.05). RESULTS. The dentin cleaning methods did not significantly affect the SBS of ceramic discs to dentin as follows: dental explorer, pumice, cleaning bur, and Er:YAG laser. CONCLUSION. The use of different cleaning protocols did not affect the SBS between dentin and ceramic surfaces.