Ethylidene norbornene(ENB)과 endo-dicyclopentadiene(endo-DCPD) 블렌드를 $1^{st}$ generation과 $2^{nd}$ generation Grubbs 촉매 하에서 ring-opening metathesis polymerization(ROMP)으로 제조하였다. ROMP 과정을 이해하기 위하여 시차주사열분석기(DSC)로 동적 발열거동을 분석하였으며, 반응 후 만능시험기(UTM)로 인장특성을 조사하였다. 반응속도는 endo-DCPD의 양이 적을수록 그리고 $2^{nd}$ generation 촉매 하에서 더 빨라졌다. 또한 endo-DCPD를 첨가할수록 그리고 $1^{st}$ generation 촉매 시스템에서 인장탄성률과 강도는 더 높은 값을 보였으나 강인성은 감소하였다. 이와 같은 인장특성의 변화를 젤 분율 측정과 파단면 관찰을 통하여 자세히 설명하였다.
본 연구에서는 5-ethylidene-2-norbornene(ENB)과 가교제가 혼합된 ENB 자가치료제에 melamine-urea-formaldehyde로 둘러싸인 마이크로캡슐을 제조하였다. 이때 자가치료제에는 빨간 색소를 첨가하여 관찰이 용이하도록 하였다. 마이크로캡슐의 열적 저항성과 캡슐의 크기 및 분포 그리고 형상을 관찰한 결과 우수한 캡슐이 제조된 것을 확인하였으며, 자가치료제에 빨간 색소의 첨가가 캡슐의 형성에 영향을 주지 않았다. 또한 마이크로캡슐과 Grubbs 촉매를 에폭시 코팅 층에 분산시킨 다음 이에 손상을 가하여 크랙을 유발하고 그것을 광학현미경으로 관찰한 결과, 크랙에 의해 캡슐이 파손되어 자가치료제가 흘러나와 크랙 면을 채우고 촉매와 반응하는 것을 알 수 있었다.
Two different diene monomers [dicyclopentadiene (DCPD) and 5-ethylidene-2-norbornene (ENB)] as self-healing agents for polymeric composites were microencapsuled by in situ polymerization of urea and formaldehyde. We obtained plots of the storage modulus (G') and tan $\delta$ as a function of cure time by using dynamic mechanical analysis to investigate the cure behavior of the unreacted self-healing agent mixture in the presence of a catalyst. Glass transition temperatures (T$\_$g/) and exothermic reactions of samples cured for 5 and 120 min in the presence of different amounts of the catalyst were analyzed by differential scanning calorimetry. Of the two dienes, ENB may have advantages as a self-healing agent because, when cured under same conditions as DCPD, it reacts much faster in the presence of a much lower amount of catalyst, has no melting point, and produces a resin that has a higher value of T$\_$g/. Microcapsules containing the healing agent were successfully formed from both of the diene monomers and were characterized by thermogravimetric analysis. Optical microscopy and a particle size analyzer were employed to observe the morphology and size distribution, respectively, of the microcapsules. The microcapsules exhibited similar thermal properties as well as particle shapes and sizes.
This study focused on the introduction of the self healing technique for polymeric composites and evaluated the healing efficiency by the use of the interlaminar toughness fracture test. The DCPD (dicyclopentadiene) and ENB (5-ethylidene-2-norbornene) were used for the healing agent and the Grubbs' catalyst was used for the catalyst. According to the results, healing efficiency was found to be 37.9%, 22.3%, 26.3%, 22.8%, 30.8%, 30.8%, 33.0%, 33.4% for mode II fraction of 0%, 20%, 35%, 50%, 65%, 80%, 90%, 100%, respectively.
고분자 복합재 구조물의 경우 일반적으로 여러 층의 단층(laminar)이 적층된 구조로 이루어져 있으며, 모재균열, 층간분리 및 섬유파단과 같은 손상이 발생되어 파단에 이르게 된다. 자가손상 복구기법은 복합소재의 열경화성 수지 내에 손상복구액을 포함하고 있는 마이크로캡슐과 촉매를 투입하여 외부의 도움 없이 손상을 치료할 수 있는 방법으로, 소재의 디자인에 있어서 새로운 페러다임을 제공할 수 있는 것으로 현재 많은 연구가 진행되고 있다. 본 연구에서는 ENB(5-ethylidene-2-norbornene)와 DCPD(dicyclopentadiene)에 대하여 DMA(dynamic mechanical analysis)와 DSC(differential scanning calorimetry)를 이용하여 특성을 분석하였다. 또한 그들의 ROMP(ring-opening metathesis polymerization)반응과의 관계를 조사하였으며, ENB와 DCPD 블렌드에 대한 복구액으로서의 특성도 조사하였다. 본 연구실에서 합성된 두 가지 다른 종류의 ROMP 경화제에 대한 실제 자가손상복구에으로서의 적용상 특성도 연구하였다.
본 연구에서는 single lap 전단시험을 통해 자가치료제와 촉매의 혼합비율 및 경화온도가 자가치료용 폴리머 복합재에 적용되는 자가치료제의 접착성능에 미치는 영향을 조사하였다. 자가치료세로는 DCPD (dicyclopentadiene), ENB(5-ethylidene-2-norbornene), DCPD와 ENB가 혼합된 경우를 고려하였으며 촉매로는 bis(riclohexylphosphine) benzyllidine rethenium (IV) dichloride Grubbs' catalyst를 사용하였다. 이때 DCPD에 대한 촉매의 혼합비율은 1.0wt%와 0.5wt%, ENB에 대한 촉매의 혼합비율은 0.lwt%, DCPD와 ENB의 혼합액에 대한 촉매의 혼합비율은 0.5wt%를 적용하였으며 경화온도는 $25^{\circ}C$, $60{\circ}C$, $80^{\circ}C$를 고려하였다. 연구결과에 따르면 DCPD의 경우 안정화된 접착강도를 얻기 위해서는 많은 양의 촉매와 긴 경화시간이 요구되었다 ENB의 경우는 DCPD의 경우에 비해 촉매의 혼합비율이 낮아도 빠른 경화반응을 얻을 수 있었지만 경화시간이 증가함에 따라 접착전단강도는 DCPD와는 달리 최대 값에 도달하였다가 점차 감소하면서 안정화되는 양상을 나타내었다. DCPD와 ENB의 혼합액 경우도 ENB와 유사한 경화거동을 나타내며 DCPD에 대한 ENB의 혼합비율이 높을 수록 경화반응이 빨라지는 양상을 얻을 수 있었다. 아울러 경화온도가 높을수록 집착전단강도는 증가되며 안정화된 평탄부에 도달하는 경화시간은 짧아짐을 알 수 있었다
The hydrogen fuel and fuel cell which have high energy efficiency and low pollutant emission are getting interest as an alternative energies due to the fossil fuel exhaust, green house effect and atmospheric pollutant problems. The hydrogen gas is very effective as an alternative energy. But, if it is leaked into the air it forms the mixed gas with the air then the danger of the explosion is risen up. So, the secure the safety is mostly important. In this research, to detect the leakage of the hydrogen rapidly, added the odorant materials which don't include the sulfur component into the hydrogen gas and researched on the effect of each odorant on the performance of the fuel cell. As the results, setting the cumulation electric power on the basis and comparing the pure hydrogen, 2,3-Butanedione 5ppm mixed gas 86.1%, 5-Ethylidene-2-Norbornene 17ppm mixed gas 88.2%, Isovaleraldehyde 10ppm mixed gas 74.8%, Ethyl Isobutyrate 2.2ppm mixed gas 93.5% of performance was shown.
전기차의 수요 및 보급이 확대됨에 따라 차량 내 이음(buzz, squeak, rattle, BSR) 개선에 대한 요구가 커지고 있다. 이에 풍절음, 도어 글라스 및 차량 진동을 차단하는 인너벨트 웨더스트립(innerbelt weatherstrip)의 댐핑(damping) 특성 향상을 통해 BSR을 저감하는 기술 개발이 필수적이다. 기존 열경화성(thermoset) 탄성체 대비 가볍고 재활용이 가능한 열가소성(thermoplastic) 탄성체가 주목을 받고 있지만 낮은 소재 댐핑과 영구압축줄음률(compression set)로 인해 도어 글라스와 웨더스트립 간 마찰 소음을 발생하는 문제가 있다. 고분자 댐핑 특성은 점탄성(viscoelastic)에 좌우되므로, 본 연구에서는 인너벨트 웨더스트립과 도어 글라스 간 마찰 소음을 개선하기 위해 EPDM (ethylene-propylene-diene monomer)/PP (polypropylene) thermoplastic vulcanizates (TPV)의 재료설계인자(EPDM/PP 비율, EPDM 내 ENB 함량)에 따른 점탄성 분석을 통해 소재 댐핑 특성을 평가하였다. EPDM/PP 비율에 따른 분석을 통해 PP 비율이 낮을수록 소재가 연화되고, 탄성회복력(resilience)이 증가하여 저장탄성률(storage modulus)은 10.8% 감소하고 댐핑 특성을 의미하는 감쇠계수(tanδ)는 88.2% 증가함을 확인하였다. 또한 EPDM 내 ENB 함량이 높을수록 소재의 가교밀도(crosslink density)가 증가하지만, 동적가교(dynamic vulcanizate) 과정 중 PP에 분산된 EPDM particle의 크기가 감소한다. 이로 인해 증가된 EPDM/PP 계면 간 면적 증가로 인해 계면 미끄러짐에서 기인한 손실탄성률(loss modulus)이 24.7% 증가하여 댐핑 특성이 향상되었다. 재료설계인자에 따른 물성분석을 바탕으로 최적 소재(낮은 PP 비율(14 wt%), 높은 ENB 함량 (8.9 wt%))를 배합한 결과 소재 댐핑 특성(tanδ peak)은 기존 소재(PP27, EPDM/PP 30/27, ENB content 5.7 wt%) 대비 140% 증가하여 재료설계인자에 따라 댐핑 특성을 제어할 수 있음을 확인하였다. 설계된 소재의 글라스 마찰 소음 개선 효과를 확인하기 위해 stick-slip 시험을 통해 마찰 소음을 평가하였다. 소재 댐핑 특성이 향상됨에 따라 마찰 진동의 가속도 peak가 약 57.9% 감소하였다. 이러한 결과로부터 재료설계인자에 따른 소재 댐핑 특성 향상을 통해 인너벨트 웨더스트립의 글라스 마찰 소음을 개선할 수 있음을 확인하였으며, 향후 소재 재료설계인자에 따른 물성 제어를 통해 부품의 요구 성능에 맞는 다양한 재료설계에 활용할 수 있을 것으로 기대된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.