• Applied Biological Chemistry
• /
• v.30 no.2
• /
• pp.126-132
• /
• 1987

The usual sterilization methods such as fumigation and autoclaving of laboratory rodent diet was compared with a new irradiation treatment in the point of sterilization effect and physico-chemical quality. Under the treatments of $10{\sim}20\;kGy$ ${\gamma}-irradiation$ and autoclaving at $121^{\circ}C$ for 20 min, total microorganisms were eliminated but ethylene oxide fumigation was insufficient to destory them. Total amino acid content was reduced about 5% in 20 kGy radiation treatment compared with control, while in the ethylene oxide fumigation and the autoclaving, the reducing rate was markedly great as 15% and 20%, respectively. Total sugar and mineral contents were not significantly different among treatment among treatment groups. TBA values were increased in all treatments. The pH of irradiated group war stable in comparison with that of ethylene oxide. In the treatments of ethylene oxide and especially autoclaving, overall appearance was decreased to a great extent as a result of decreasing lightness and increasing redness.

• Development and Reproduction
• /
• v.15 no.4
• /
• pp.281-289
• /
• 2011

The objective of this study was to investigate the effective cryoprotectants for the cryopreservation of porcine mesenechymal stem cells (pMSCs). In order to understand the effectiveness of various cryoprotectants on pMSCs, we studied the most commonly used cryoprotectants; dimethyl sulfoxide (DMSO), ethylene glycol (EG), DMSO and EG. pMSCs were isolated from bone marrow matrix of piglet (2 month) and characterized by alkaline phopshatase (AP) activity, colony forming, and differentiation to adipocyte. In slow cooling cryopreservation, the pMSCs were exposed to cell medium containing Dulbecco's Modified Eagle's Medium (DMEM) supplemented with 10% DMSO, 1.5M EG and 5% DMSO/0.75M EG, respectively, and freezed to $-1^{\circ}C$/min from $25^{\circ}C$ up to $-80^{\circ}C$ in a cryo-container. The proportion of viable cells and the growing rates in fresh pMSCs were significantly (P<0.05) higher than those of other groups, but did not differ between the cryopreserved groups. The expression of Sox-2 and Nanog gene was increased by extending culture time in cryopreserved groups. The expression of Bax gene in cryopreserved groups was similar with fresh pMSCs. Moreover, the gene expression of adipocyte-specific marker as well as chondrogenic/osteogenic factors in cryopreserved groups was similarly to fresh pMSCs. Taken together, our results suggested that all these cryoprotectants of 10% DMSO, 1.5M EG and 5% DMSO/0.75M EG could be used for cryopreservation of the pMSCs.

• Macromolecular Research
• /
• v.15 no.4
• /
• pp.348-356
• /
• 2007

The aim of this study was to fabricate a submicro-and micro-patterned fibronectin coated wafer for a cell culture, which allows the positions and dimensions of the attached cells to be controlled. A replica molding was made into silicon via a photomask in quartz, using E-beam lithography, and then fabricated a polydimethylsiloxane stamp using the designed silicon mold. Hexadecanethiol $[HS(CH_2){_{15}}CH_3]$, adsorbed on the raised plateau of the surface of polydimethylsiloxane stamp, was contact-printed to form self-assembled monolayers (SAMs) of hexadecanethiolate on the surface of an Au-coated glass wafer. In order to form another SAM for control of the surface wafer properties, a hydrophilic hexa (ethylene glycol) terminated alkanethiol $[HS(CH_2){_{11}}(OCH_2CH_2){_6}OH]$ was also synthesized. The structural changes were confirmed using UV and $^1H-NMR$ spectroscopies. A SAM terminated in the hexa(ethylene glycol) groups was subsequently formed on the bare gold remaining on the surface of the Aucoated glass wafer. In order to aid the attachment of cells, fibronectin was adsorbed onto the resulting wafer, with the pattern formed on the gold-coated wafer confirmed using immunofluorescence staining against fibronectin. Fibronectin was adsorbed only onto the SAMs terminated in the methyl groups of the substrate. The hexa (ethylene glycol)-terminated regions resisted the adsorption of protein. Human dermal fibroblasts (P=4), obtained from newborn foreskin, only attached to the fibronectin-coated, methyl-terminated hydrophobic regions of the patterned SAMs. N-HDFs were more actively adhered, and spread in a pattern spacing below $14{\mu}m$, rather than above $17{\mu}m$, could easily migrate on the substrate containing spacing of $10{\mu}m$ or less between the strip lines.

• Composites Research
• /
• v.22 no.3
• /
• pp.35-43
• /
• 2009

In this study, for a radiator hose made of carbon black filled EPDM(ethylene-propylene diene monomer) rubber, a measuring method of crosslink density was established to analyze the aging behaviors under thermo-oxidative stresses. At $125^{\circ}C$, the crosslink density of the rubber specimens decreased slightly in the initial stage, but increased with increasing the aging time. Such variation in crosslink density was similar to that of tensile strength. This might be due to the formation of sulphoxide crosslinks as well as to additional crosslinks made by the reaction of unvalcunized sulfurs. A high temperature aging of rubber specimens at $180^{\circ}C$ caused a slight increase in crosslink density while it did a large decrease in tensile strength and elongation. With aging at high temperature, the formation of carbonyl groups in EPDM molecule chain and formation of sulphoxide crosslink, rather than the crosslink density variation itself, had a large influence on such changes in mechanical property.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.1
• /
• pp.83-90
• /
• 2017

The polyurethane resin used for the garment skin leather surface coating was synthesized by varying the content of polyethylene glycol (PEG) in [NCO] / [OH] mole % ratio. The mechanical properties of the synthesized polyurethane resin were analyzed by SEM, FT-IR, UTM. As the [NCO] / [OH] mole % ratio of nonionic poly ethylene glycol (PEG) increased, there was no change in flexural resistance (dry, wet) and abrasion resistance and tensile strength measurement value were lowered. In contrast, the elongation property values were increased. The result of viscosity measurement showed that the viscosity became thinner with increasing [NCO] / [OH] mole % of PEG.

• Applied Chemistry for Engineering
• /
• v.4 no.4
• /
• pp.770-775
• /
• 1993

Chemical structure of poly(ethylene terephthalate-co-1, 4-cyclohexylene dimethylene terephthalate), P(ET-CT) copolyesters was investigated by High Resolution NMR analysis. The copolymer composition and isomeric ratio were determined by methylene resonance peaks which were separated into three peaks corresponding to ET, trans CT and cis CT units, respectively. The copolymer sequence distribution was evaluated from the carbon resonance peaks connected to carbonyl groups in benzene, indicating died distribution. According to statistics model, these copolyesters are almost random copolymers. The copolymer sequence distribution could be simulated and its averaged length was calculated by random copolymer statistics.

• Polymer(Korea)
• /
• v.26 no.3
• /
• pp.353-359
• /
• 2002

High intensity ultrasound has been applied to a series of poly(ethylene oxide) (PEO)/water systems having different molecular weights of PEO. Major interest was focused on the effect of ultrasonic wane on the melt viscosity chemical structure and thermal properties of PEO. The expected role of ultrasound used in this study was to generate macroradicals of PEO chains by the formation and subsequent collapse of bubbles. It was found that the melt viscosity and chemical structure of PEO change significantly depending on the sonication time. For the prolonged sonication, PEO chains were significantly degraded and new end groups were formed by the interplay of various radical species. When the molecular weight of PEO was relatively higher, the crystallization rate was decreased and the intensity of the melting peak was reduced.

• Advances in Traditional Medicine
• /
• v.9 no.3
• /
• pp.259-267
• /
• 2009

Curcumin (CMN) is known to have beneficial role in anorexia, coryza, cough, diabetic wounds, and hepatic disorders apart from its inherent antioxidant effects. Therefore, the present study was aimed to evaluate antioxidant effect of CMN in prevention of nephrolithiasis in rats-induced by ethylene glycol (EG) and Vitamin D3 (Vit. D3). Male Wistar rats (175 - 200 g) were randomized in groups like control, EG + Vit. D3 induced nephrolithiatiatic rats, CMN treated rats, CMN + EG + Vit. D3 treated rats, Vit. E + EG + Vit. D3 treated rats. Urine was collected weekly throughout the experimental protocol and estimated for calcium oxalate (CaO) count. After completion of experimental protocol serum was estimated for blood urea nitrogen and creatinine. Both the kidneys were excised and used to evaluate levels of biomarkers of oxidative stress and calcium oxalate crystal deposition by histopathological studies. Administration of EG and Vit. D3 to rats resulted in increased oxidative stress, hyperoxaluria and renal deposition of CaO crystals. Supplementation with CMN improves kidney function, reduces elevated oxidative stress, urinary oxalate level and renal deposition of CaO which shows its protective action in nephrolithiasis. The increased deposition of stone in the kidney and stone forming constituents of nephrolithiatic rats were effectively lowered by treatment of CMN.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.4
• /
• pp.549-554
• /
• 2002

Thermosensitive poly(organophosphazenes) bearing methoxy-poly(ethylene glycol) (MPEG) and alkylamines as substituents have been synthesized and characterized by elemental analysis, NMR spectroscopy, GPC, and DSC. All the polymers exhibited crystallinity, which was probably induced by the MPEG side chain of the polymers. All the polymers exhibited the lower critical solution temperature (LCSTs) in the range of 28 to $94^{\circ}C$ depending on several factors such as mole ratio of the substituents, kinds of PEG and alkylamines. The higher content of MPEG and shorter chain length of alkylamines of the polymers afforded the higher LCST. The LCSTs of the polymers exhibited almost concentration-independent behavior in the range of 3-30 wt % of the polymers in aqueous solutions. The polymers showed the higher LCSTs in the acidic solutions than in the neutral and basic solutions. The ionic strength of the polymer solution affected the LCST, which decreased with increased NaCl concentration. The polymer bearing almost equimolar substitutuents with the -N-P-N- unit has shown the LCST more sensitive to NaCl and pH than that with the -N-P-O- unit. The polymers were found to degrade in acidic solution but be very stable in alkali solution as well as in the buffer solution of pH 7.4.

• Journal of the Korean Society of Safety
• /
• v.14 no.2
• /
• pp.83-89
• /
• 1999

The electrical properties due to mixture ratio of linear low density polyethylene(LLDPE) and ethylene vinyl acetate(EVA) films are studied. An experimental specimen is selected as LLDPE/EVA of thickness 200${\mu}{\textrm}{m}$ produced by mixture ratio of 50 : 50, 60 : 40, 70 : 30 and 80 : 2 wt%. In temperature range from $25^{\circ}C$ to 12$0^{\circ}C$, the measurement of volume resistivity using a highmegohm meter is performed within 10 minutes since each voltage of DC 100 V, 250 V, 500 V and 1000 V is applied, according to the step voltage method. From FT-IR spectrum for an analysis of physical properties, it can be confirmed that LLDPE blended with EVA shows an absence of carbonyl groups(1735 $cm^{-1}$, C=0) and ether groups(1242 $cm^{-1}$, C-O). The peak of LLDPE and EVA made of mixture ratio of 70 : 30 at 2$\theta$ =21.4$^{\circ}$ in the results of XRD is higher than the others. In the experiment for volume resistivity characteristics in order to investigate the electrical properties of specimen, it is confirmed that volume resistivity is decreased with the increase of the molecular motion and temperature.