• 제목/요약/키워드: ether group

검색결과 432건 처리시간 0.029초

DI 디젤기관에서 함산소연료(EGBE)와 EGR의 유용성에 관한 실험적 연구 (An Experimental Study on Usability of Oxygenated Fuel(EGBE) and EGR in a DI Diesel Engine)

  • 최승훈;황윤택;김우상;오영택
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2003년도 춘계학술대회
    • /
    • pp.1697-1702
    • /
    • 2003
  • In this paper, the effect of oxygen component in fuel on the exhaust emissions has been investigated for a direct injection diesel engine. It was tested to estimate change of engine performance and exhaust emission characteristics for the commercial diesel fuel and oxygenated blended fuel which has seven kinds of mixed ratio. And, the effects of exhaust gas recirculation(EGR) on the characteristics of NOx emission have been investigated. Ethylene glycol mono-n-butyl ether(EGBE) contains oxygen component 27% in itself, and it is a kind of effective oxygenated fuel of mono-ether group that the smoke emission of EGBE blended fuel is reduced remarkably compared with commercial diesel fuel, that is, it can supply oxygen component sufficiently at higher loads and speeds in a diesel engine. It was found that simultaneous reduction of smoke and NOx was achieved with oxygenated fuel and cooled EGR method.

  • PDF

Effects of Replacement of Fish Meal with Poultry By-product Meals on Apparent Digestibility, Body Composition and Protein Efficiency Ratio in a Practical Diets for Rainbow Trout, Onchorynchus mykiss

  • Erturk, M.Mustafa;Sevgili, Huseyin
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제16권9호
    • /
    • pp.1355-1359
    • /
    • 2003
  • This study examined the replacement of the fish meal (FM) with commercial poultry by-product meal (PBM) in practical diets for rainbow trout (Onchorynchus mykiss, Walbaum). Five isocaloric and isonitrogenous diets containing levels 0 (control), 10, 20, 30 and 40% of PBM as a replacement for FM were fed to three replicate groups of rainbow trout with a initial weight $34.50{\pm}0.43g$ (mean${\pm}$SE). Protein efficiency ratio (PER) of diets containing PBM up to 20% were similar to the control while significantly lower values were obtained from the groups receiving higher levels of PBM (p<0.05). Apparent protein digestibility coefficients (ADCs) were significantly lower than that of the control group when PBM was included at level of 20% or more. Similarly, significantly lower values were observed with diets containing 30 and 40% PBM in terms of dry matter, organic matter, ether extract, ash and energy digestibility (p<0.05). Dietary treatments did not significantly affect the body composition of the fish in terms of dry matter, crude protein, ether extract and ash. In conclusion, PBM in a proportion of 20% may replace about 40 % of FM in rainbow trout diet without significant impairment grow.

Zn-Ion Coated Structural $SiO_2$ Filled LDPE: Effects of Epoxy Resin Encapsulation

  • Reddy C. S.;Das C. K.;Agarwal K.;Mathur G N.
    • Macromolecular Research
    • /
    • 제13권3호
    • /
    • pp.223-228
    • /
    • 2005
  • In the present work, a low-density polyethylene (LDPE) composite, filled with Zn-ion coated structural silica encapsulated with the diglycidyl ether of bisphenol-A (DGEBA), was synthesized using the conventional melt-blending technique in a sigma internal mixer. The catalytic activity of the Zn-ions (originating from the structural silica) towards the oxirane group (diglycidyl ether of bisphenol-A (DGEBA): encapsulating agent) was assessed by infrared spectroscopy. Two composites, each with a filler content of $2.5 wt\%$ were developed. The first one was obtained by melt blending the Zn-ion coated structural silica with LDPE in a co-rotating sigma internal mixer. The second one was obtained by melt blending the same LDPE, but with DGEBA encapsulated Zn-ion coated structural silica. Epoxy resin encapsulation of the Zn-ion coated structural silica resulted in its having good interfacial adhesion and a homogeneous dispersion in the polymer matrix. Furthermore, the encapsulation of epoxy resin over the Zn-ion coated structural silica showed improvements in both the mechanical and thermal properties, viz. a $33\%$ increase in the elastic modulus and a rise in the onset degradation temperature from 355 to $371^{\circ}C$, in comparison to the Zn-ion coated structural silica.

Resorcinol계 Photoresist의 합성과 그 감광 특성 (Synthesis and Photocharacteristics of Resorcinols Photoresist)

  • 근장현;김승진;박홍수
    • 공업화학
    • /
    • 제5권4호
    • /
    • pp.662-668
    • /
    • 1994
  • Photoresist로의 응용을 위하여 감광성 관능기를 가진 폴리머인 polyresorcinol-formaldehyde glycidyl ether의 cinnamoyl ester(RGEFC)를 제조하였다. RGEFC의 감광 특성은 노광 전후의 유기용매에 대한 용해도 차이로서 결정하였는데, 유리판상에 도포한 각종 시료를 제반조건하에서 노광한 다음, 도포시에 사용한 같은 용매에 담그어 잔막수득량을 계산하였다. 필름의 감도와 밀접한 관계를 가지는 수득량은 수지의 중합도, 증감제의 종류 및 첨가농도에 따라 좌우되었으며, 그 감도는 폴리머의 중합도에 의존되어 중합도가 커질수록 증가되었다. 사용된 증감제 중 RGEFC에 대한 가장 효과적인 증감제는 2, 6-dichloro-4-nitroaniline이었다.

  • PDF

Stability and in Vivo UV-Protecting Efficacy of Emulsions Stabilized with Cinnamoyl Surfactants

  • Park, Seok Ho;Kwon, Kyeongnan;Kim, Jin-Chul
    • Korean Chemical Engineering Research
    • /
    • 제56권2호
    • /
    • pp.143-150
    • /
    • 2018
  • Oil-in-water emulsion was prepared using cinnamoyl surfactants as emulsifiers. Cinnamoyl surfactants used in the present study were polyoxyethylene (20) sorbitan monolaurate-cinnamic acid conjugate (TW20CA), polyoxyethylene (20) cetyl ether-cinnamic acid conjugate (CE20CA), and polyoxyethylene(20) oleyl ether-cinnamic acid conjugate (OE20CA). The emulsion stabilized with TW20CA was the most stable, possibly because the polyoxyethylene segment of TW20CA would sterically stabilize the oil droplets effectively. In vivo UV protecting efficacy of surfactant and emulsion was investigated by determining the minimum amount of UV light (MAUL) to induce a black point on the back of hairless mice (HRM2). The mean MAUL of PARSOL, OE20CA, and emulsion stabilized with TW20CA was $1046.5mJ/cm^2$, $1163mJ/cm^2$, and $1308.5mJ/cm^2$, respectively. The high UV-protecting efficacy of the emulsion could be ascribed to not only the UV-absorbing property of cinnamoyl group but also the UV-scattering property of the oil droplets.

전자제품 제조용 친환경 점착제의 합성과 물성에 대한 연구 (A Study on the Synthesis and Properties of Environmental Friendly Pressure Sensitive Adhesive for Manufacturing Electronic Products)

  • 조을룡;오지환;김지현;정현정
    • 반도체디스플레이기술학회지
    • /
    • 제15권1호
    • /
    • pp.12-16
    • /
    • 2016
  • Toluene-free pressure sensitive adhesives were synthesized by using butyl acrylate (BA), 2-hydroxy ethyl acrylate, methyl methacrylate, acrylic acid (AA) as monomers and ethyl acetate as a solvent. The polymerization recipes were designed by changing 1, 3, 5 part per hundreds monomer (phm) of AA content on the basis of 100 BA parts. Two crosslinking agents, ethyl glycol diglycidyl ether (EDGE) and isophorone diisocyanate (IPDI) were added to the synthesized polymers to increase adhesion due to crosslinking. In the measurement of properties, holding power, peel strength, and initial tackiness increased with AA content due to crosslinking between carboxyl group in AA and epoxy group in EDGE and isocyanate group in IPDI. In the comparison of two crosslinking agents, EDGE showed better in the three properties than IPDI by better reaction of epoxy group of EDGE to carboxyl group of AA.

열중합(熱重合) 의치상(義齒床) Resin과 합성수지인공치(合成樹脂人工齒)의 결합강도(結合强度)에 관(關)한 연구(硏究) (Bonding of acrylic resin teeth to hear-cured denture base resins)

  • 이명곤
    • 대한치과기공학회지
    • /
    • 제8권1호
    • /
    • pp.23-29
    • /
    • 1986
  • One of the primary advantage of acrylic resin teeth is their ability to bond chemically to the denture base resins. But, occasionally, failure have been observed in which acrylic resin teeth break lose from the denture, indicating that chemical bonding does not always occur. The most probable explanation for this type of failure was the presence of a trace of wax remaining as a residue on the surfaces of the teeth after the boiling-out procedure which adgered to the tooth surface and prevented bonding. The purpose of this stdy was preparing the specimens of denture base resin with acrylic resin teeth that four treatment method to ridge lap portion of the tooth and investigated bond between the teeth and denture base resin with tensile strength. Compared results of tensile strength on test specimens were as follows: 1. The mean of strength among the four test groups showed the difference was significant enough(P 0.01). The order of its strength mean was methylene chloride treatment group, detergent solution treatment group, kerosene-ether treatment grgoup, boiling water only group. 2. In compared results between the wax eliminating method groups, there were significant difference between the boiling water only group and other groups(P 0.01), no significant difference were found in the wax eliminating method groups except boiling water only group(P 0.05).

  • PDF

Effects of dietary onion (Allium cepa) extract supplementation on performance, apparent total tract retention of nutrients, blood profile and meat quality of broiler chicks

  • Aditya, Siska;Ahammed, Musabbir;Jang, Seong Hun;Ohh, Sang Jip
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제30권2호
    • /
    • pp.229-235
    • /
    • 2017
  • Objective: This study was conducted to investigate the effect of dietary onion (Allium cepa) extract (OE) supplementation on growth performance, apparent total tract retention (ATTR), blood profile, carcass characteristics and meat quality in broilers. Methods: Four hundred male broiler chicks (Ross 308, 3-d old) were randomly allocated to four dietary treatments for 28 d feeding trial. Each treatment has five replications with 20 birds each. Four dietary treatments were designated according to the OE supplementation levels (0 as control, 5, 7.5, and 10 g of OE per kg of basal diet respectively). On d 28, a total of 20 birds from each treatment were subjected for ATTR, serum biochemical assay, carcass characteristic and organ weight measurement. Results: Overall weight gain of OE 7.5 g/kg group was higher (p = 0.04) than control group. The ATTRs of dietary energy (p<0.01) and ether extract (p = 0.04) linearly increased with increasing levels of dietary OE. However, no difference in ATTR of dry matter and crude protein was evident. Furthermore, serum IgG concentration increased linearly (p<0.01) and quadratically (p = 0.03) with increasing OE supplementation. No differences in carcass dressing weight and amount of abdominal fat by treatments were observed. Also, the weight of organ including immune organ was not different among the treatments. The TBARS values of 10 d stored breast meat decreased linearly (p<0.01) and quadratically (p<0.01) with increasing dietary OE levels. The meat color was also affected, with lower (p<0.01) redness score in meats from OE supplemented groups. This study showed that dietary OE improved broiler weight gain presumably by increasing feed intake and ATTR of both energy and ether extract. The dietary OE increased serum IgG level and meat anti-oxidation capacity. Conclusion: This study implies that the recommended level of dietary OE supplementation could be beneficial for improving broiler performance and meat quality.

4-Arm 스타형과 선형 블록 공중합체의 구리 프탈로시아닌 분산 연구 (4-Arm Star Shaped and Linear Block Copolymers for Copper Phthalocyanine Dispersion)

  • 김병재;정종화;정지혜;김봉수;정기석;백현종
    • 폴리머
    • /
    • 제38권5호
    • /
    • pp.671-675
    • /
    • 2014
  • 본 연구에서는 잘 규정된 4-arm 스타형 및 선형 고분자를 합성하여 구조에 따른 구리 프탈로시아닌(CuPc)의 분산 안정성을 비교하였다. 분산제는 (2-dimethylamino)ethyl methacrylate(DMAEMA)와 poly(ethylene glycol) methyl ether methacrylate(PEGMA)를 사용하여 activators generated by electron transfer(AGET) 원자이동라디칼중합법(ATRP)으로 합성하였다. 합성된 고분자는 젤투과 크로마토그래피(GPC)와 핵자기 공명 분광법(NMR)을 사용하여 합성한 고분자들의 분자량 및 단량체의 조성을 결정하였다. 4-Arm 스타형 고분자 및 선형 고분자 분산제에서 stabilizing group인 PEGMA의 중합도를 조절하여 copper phthalocyanine(CuPc)의 분산 안정성에 미치는 영향을 연구하였다. PEGMA의 DP가 130인 4-arm 스타형 고분자를 사용한 경우 $25^{\circ}C$에서 7일 동안 CuPc의 분산상이 안정적으로 유지되었다.

Malononitrile로 개질된 DGEBA-MDA계의 경화반응 속도론 및 반응 메카니즘 (Cure Konetics and Mechanism of DGEBA-MDA-Malononitrile System)

  • 임성수;조성우;유희열;심미자;김상욱
    • 한국재료학회지
    • /
    • 제3권3호
    • /
    • pp.215-222
    • /
    • 1993
  • 에폭시 수지를 개질하기 위하여 반응성 첨가제 Malononitrild(MN)을 Diglycidy1 ether fo vispenol A (CGEBA)/Methylene dianiline(MDA)계를 첨가하여 이 계의 경화 반응속도론과 경화반응메카니즘을 시차주사 열분석(DSC)과 적외선 흡수 분광법을 통해 관찰하였다. 경화반응속도론으로부터 MN으로 개질된 DGEBA/MDA는 완전히 경화를 이루기 위하여 $80^{\circ}C$로 부터 $170^{\circ}C$까지 $30^{\circ}C$간격으로 경화시킨 시료로 반응메카니즘을 고찰한 결과 PA(primary amine)-E(epoxide)그리고 E(epoxide)-OH(hydroxy1 group)반응 이외에 PA(primary amine)-CN(nitrile)과 CN(nitrile)-OH(hydroxy1 group)반응이 일어남을 알았다.

  • PDF