• Textile Coloration and Finishing
• /
• v.8 no.2
• /
• pp.49-55
• /
• 1996

Poly(4, 4'-diphenyl ether pyromellitamic acid) was prepared from pyromellitic anhydride with 4, 4'-diamino diphenyl ether by means of low-temperature solution polymeriztion. The reation was exothermic and very fast when carried out at room temperature. The synthesized poly(4, 4'-diphenyl ether pyromellitamic acid) was converted to poly(4, 4'-diphenyl ether pyromellitimide) by thermal dehydrocyclization. FTIR analysis was widely used as a means of determining the course of imidization from intensity of characteristic bands of the imide ring at $1790cm^{-1}$ and $1490cm^{-1}$. The density of poly(4, 4'-diphenyl ether pyromellitimide) was higher than poly(4, 4'-diphenyl ether pyromellitamic acid) indicating the greater crystallinity, perhaps because of the reduction of molar volume of polymers

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.08a
• /
• pp.110-113
• /
• 2003

We report herein synthetic results obtained six new types of bis-benzocrown ethers containing imine group. Bis crown ethers l~3 are aminobenzo-15-crown-5-ether linked with terephthalaldehyde, isophthalaldehyde, phthaldehyde respectively by imine reaction. Bis crown ethers l~3 are different distances in each crown ether rings. Bis crown ether 4 has large cavity in crown ethers. Functionalized crown ether 5 is synthesized amonobenzo-l5-crown-5-ether and terephthaladehyde same ratio at one to one. Bis crown ether 6 has phothosensitive linkage between crown ethers. Bis crown ether 7 is prepared by amonobenzo-l5-crown-5-ether and triethyl ortho formate. 4'-Nitrobenzo-crown ethers and 3',4'-dinitrobenzo-crown ethers were prepared by nitration of benzo crown ethers, obtained from the reaction of catechol and oligoethylene glycol ditosylate. Crown ethers containing aldehyde group were synthesized from the reaction of 3,4-dihydroxybenzaldehyde and corresponding ditosylate respectively. The synthesized crown ethers were characterized respectively by IR, NMR. GC-Mass.

• Journal of the Semiconductor & Display Technology
• /
• v.17 no.2
• /
• pp.47-52
• /
• 2018

The three polyols, poly(trimethylene ether) glycol 2000, poly(tetramethylene ether) glycol 2000 and poly (tetramethylene ether) glycol 1000 were reacted with 4,4-diphenylmethane diisocyanate to get polyurethanes. The synthesized three polyurethanes were measured by FT-IR, NMR for investigating chemical structures. Through two spectroscophical methods, It is found that urethane group exists in the three polymers. From the evaluation of hardness, glass transition temperature, tensile strength, and water resistance, the results showed increasing order of Poly(tetramethylene ether) glycol 1000 > Poly(trimethylene ether) glycol 2000 > Poly(tetramethylene ether) glycol 2000 with the content of hard segment in polyurethane.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.11a
• /
• pp.463-464
• /
• 2009

기존 필드버스의 낮은 트래픽 전송률로 인하여 IEEE 802.3 이더넷이 필드버스의 대안으로 제시되었다. 하지만, 이더넷은 CSMA/CD 메카니즘을 사용하기 때문에 실시간 성이 떨어진다는 단점이 있다. 이러한 단점을 개선하기 위하여 EtherCAT이 개발되었다. 본 논문에서는 EtherCAT의 Cycle Time 성능을 분석하고 개선하기 위하여 M-EtherCAT을 제안한다. M-EtherCAT은 EtherCAT과 달리 각 Telegram이 Slave를 거치지 않기 때문에 EtherCAT 보다 Cycle Time의 최소 주기를 더 줄일 수 있다.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.2
• /
• pp.11-16
• /
• 2023

EtherCAT is an Ethernet-based fieldbus system standardized in IEC 61158 and SEMI, and widely used in the fields of factory automation, semiconductor equipment and robotics. In this paper, without operating system, we have implemented an EtherCAT master with an open source EtherCAT master stack SOEM on STM32 Nucleo-144 board with an STM32F767 microcontroller. And its jitter performance has been evaluated at the output of the network port to include all the effects of the entire system in the results. The results show that the implemented EtherCAT master has precise control performance for control frequencies from 1KHz to 8KHz and relatively superior jitter performance compared to the EtherCAT masters with real-time patched Linux operating system.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.12
• /
• pp.1393-1396
• /
• 2001

• Applied Chemistry for Engineering
• /
• v.9 no.2
• /
• pp.249-254
• /
• 1998

To synthesize cation exchange resin which has thermal stability, the sulfonated poly(ether ether sulfone) (SPEES) was obtained by sulfonation after synthesis of poly(ether ether sulfone) (PEES). It was prepared from hydroquinone and dichlorophenyl sulfone. From FT-IR results, the sulfonation was confirmed by the bands of asymmetric O=S=O stretching of $SO_3Na$ Na group at $1140cm^{-1}$ and S-C stretching at $621cm^{-1}$. The optimum condition of the sulfonation of PEES, based on IR absorbance, was 3 hr of reaction time, $30^{\circ}C$ of reaction temperature, and chlorosulfonic acid of 150 mol%. Ion exchange capacities calculated by the IR absorbance of PEES sulfonated in optimum condition was 6.2 meq/g, which was nearly similar to the ion exchange capacity calculated by titration. When the metal ion was adsorved, small brain, lump, hulled millet shape and compact surface, were observed in the morphology of SPEES.

• Journal of the Korean Chemical Society
• /
• v.30 no.4
• /
• pp.359-368
• /
• 1986

Solvent extraction equilibria of alkali metal cation with crown ether (DC18C6, DC24C8) and HDEHP have been studied. The extraction equilibrium constants increase in the order of, in the DC18C6 system, $Na^+, and in the DC24C8 system, $Rb^+. The species extracted to organic phase are $M_1(crown ether)_1\;(HDEHP)_1$. The magnitude of extraction equilibrium constant is determined by the distribution ratio of crown ether between organic and aqueous phase, and stability constant of crown ether-alkali metal complex.

• The Korean Journal of Pesticide Science
• /
• v.6 no.3
• /
• pp.193-201
• /
• 2002

The effects of 24 ionic and nonionic surfactants on paraquat (1, 1' -dimethyl-4 4'-bipyridinium) efficacy were investigated with several annual plant species under greenhouse conditions. The paraquat efficacy was decreased or even lost when treated with the anionic surfactants tested. However, the efficacy of paraquat was significantly increased by 7 nonionic surfactants such as sorbitan palmitate, sorbitan stearate, polyoxyethylene sorbitan monopalmitate, polyoxyethylene sorbitan monostearate, polyoxyethylene stearyl ether, polyoxyethylene laurylamine ether, and polyoxyethylene stearylamine ether. Among these tested surfactants, 0.08% of polyoxyethylene laurylamine ether most significantly increased the paraquat activity, and the $GR_{50}$ value of paraquat with polyoxyethylene laurylamine ether was 1.6 times lower than the $GR_{50}$ value without polyoxyethylene laurylamine ether. In in vitro experiments, cellular leakage and chlorophyll contents between the application with and without polyoxyethylene laurylamine ether did not show significant changes. The absorption rate of $^{14}C$ paraquat in the treatment with polyoxyethylene laurylamine ether showed an absorption rate of 1.6 times higher than without surfactant. These results suggest that using compatible surfactants would increase the paraquat efficacy, and this increasing are due to improved absorption rate with the surfactant.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.7
• /
• pp.785-797
• /
• 2014

Support for the precise time synchronization of EtherCAT, known as distributed clock (DC), enables the design of highly synchronized operations in distributed real-time systems. This study evaluates the performance of the EtherCAT DC through extensive experiments in a real automation system. We constructed an EtherCAT control system using Xenomai and IgH EtherCAT stack, and analyzed the clock deviation for different devices in the network. The results of the evaluation revealed that the accuracy of the synchronized clock is affected by several factors such as the number of slave devices, period of drift compensation, and type of system time base. In particular, we found that careful decision regarding the system time base is required because it has a fundamental effect on the master operation, which results in significantly different performance characteristics.