• 제목/요약/키워드: estimation of noise damage

검색결과 60건 처리시간 0.025초

발파 소음.진동 수준의 변환 연구 (A study on the transformation of blasting noise and vibration level)

  • 김남수;양형식
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
    • /
    • pp.377-380
    • /
    • 1998
  • Basting vibration and air blast were measured by particle velocity and overpressure as well as environmental unit, dB(V) and dB(A). Variables for vibration and noise show good relationship and proportional equations are suggested. But there are some variations, and it means that predictions by design variables are not valid for human damage estimation or limit application of regulations.

  • PDF

A Study on Estimation of Noise Damage caused by Rupture of Butane-can(volume : 34g)

  • Leem, Sa-Hwan;Huh, Yong-Jeong;Choi, Seong-Joo;Lee, Jong-Rark;Lim, Dong-Yeon
    • 한국가스학회지
    • /
    • 제11권1호
    • /
    • pp.13-17
    • /
    • 2007
  • It is very insecure to treat a butane can for cooking out of door. The human injury from the accidents of butane cans has been getting increased 1.5 times yearly since 2003. In this context, the Institute of Gas Technology Training in Korea Gas Safety Corporation carries out explosion experiment to make trainees to take all possible measures to ensure safe management of gas in the field by fully recognizing the hazards of gas explosion accidents. This study intends to examine the influence of such explosion experiments on the trainees witnessing nearby. The GEN exposed to the active students participating in the experiment away from 25 meters from the explosion site was 57.94 dB and the GEN to the passive students not participating away from 50 meters was 51.92 dB. According to Weber-Fechner's law for the lower value than 65 dB which is the environmental standard, it is safe from the place 15 meter far from the explosion place. The environmental standard of offices is 50 dB, and it is lower than the environmental standard if the office is 65 meter far from the explosion place.

  • PDF

신호 대 잡음비 추정 방법을 이용한 다중 주파수 밴드 잡음 억제 시스템 (Multi frequency band noise suppression system using signal-to-noise ratio estimation)

  • 오인규;이인성
    • 한국음향학회지
    • /
    • 제35권2호
    • /
    • pp.102-109
    • /
    • 2016
  • 본 논문은 밀접한 간격의 두 개의 마이크 배열 환경에서 SNR(Signal-to-Noise Ratio) 추정을 통한 잡음 억제 방법을 제안한다. 기존의 방법은 전 밴드에서 간섭 함수 기반의 SNR 추정을 통해 이득 함수를 얻는 잡음 억제 방법을 사용한다. 그러나 이 방법은 잡음으로 인한 손상이 모든 특징 벡터 성분에 영향을 미쳐 성능을 저하시키는 문제점을 가지고 있다. 따라서 주파수 영역의 신호를 N개의 다중 주파수 밴드로 구분하고 각 밴드별로 간섭 함수 기반의 SNR 추정을 통한 이득 함수를 얻는 잡음 억제 방법을 제안한다. 제안하는 방법의 성능평가는 ITU-T(International Telecommunications Union Telecommunication)에서 제공되는 객관적인 품질 평가 방법인 PESQ(Perceptual Evaluation of Speech Quality)로 비교하여 나타내었다.

신경망을 이용한 구조물 접합부의 손상도 추정 (Structural Joint Damage Assessment using Neural Networks)

  • 방은영
    • 한국지진공학회:학술대회논문집
    • /
    • 한국지진공학회 1998년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring 1998
    • /
    • pp.131-138
    • /
    • 1998
  • Structural damage is used to be modeled through reductions in the stiffness of structural elements for the purpose of damage estimation of structural system. In this study, the concept of joint damage is employed for more realistic damage assessment of a steel structure. The joint damage is estimated damage based on the mode shape informations using neural networks. The beam-to-column connection in a steel frame structure is represented by a rotational spring at the fixed end of a beam element. The severity of joint damage is defined as the reduction ratio of the connection stiffness with respect to the value of the intact joint. The concept of the substructural identification is used for the localized damage assessment in a large structure. The feasibility of the proposed method is examined using an example with simulated data. It has been found that the joint damages can be reasonably estimated for the case with the measurements of the mode vectors subjected to noise.

  • PDF

어류에 미치는 인위적인 수중소음 영향과 피해기준에 대한 고찰 (Overview of anthropogenic underwater sound effects and sound exposure criteria on fishes)

  • 박지현;윤종락
    • 수산해양기술연구
    • /
    • 제53권1호
    • /
    • pp.19-40
    • /
    • 2017
  • A scientific and objective sound exposure criterion for underwater sound damage on fish has been required since there has been many disputes between an underwater sound maker and a fish damage receiver. The existing criteria are still incomplete scientifically owing to a degree of variability of underwater sounds, diversity of fish hearing sensitivity and damage types, etc. This study reviews existing studies on a hearing mechanism of fish species, manmade underwater sound characteristics and sound exposure assessment parameters, and recent sound exposure criteria. A governing equation for damage coverage estimation and damage coverage dependency on sound source level, ambient noise and transmission loss are also reviewed and interpreted based on sound exposure environments. The foreign and Korean (National Environmental Dispute Medication Commission) criteria are reviewed and compared based on scientific aspects. In addition, the deficit and limit of Korean criteria are presented. The objective of this study is to give a direction for related researches and legislation of sound exposure criteria on fish.

Substructure based structural damage detection with limited input and output measurements

  • Lei, Y.;Liu, C.;Jiang, Y.Q.;Mao, Y.K.
    • Smart Structures and Systems
    • /
    • 제12권6호
    • /
    • pp.619-640
    • /
    • 2013
  • It is highly desirable to explore efficient algorithms for detecting structural damage of large size structural systems with limited input and output measurements. In this paper, a new structural damage detection algorithm based on substructure approach is proposed for large size structural systems with limited input and output measurements. Inter-connection effect between adjacent substructures is treated as 'additional unknown inputs' to substructures. Extended state vector of each substructure and its unknown excitations are estimated by sequential extended Kalman estimator and least-squares estimation, respectively. It is shown that the 'additional unknown inputs' can be estimated by the algorithm without the measurements on the substructure interface DOFs, which is superior to previous substructural identification approaches. Also, structural parameters and unknown excitation are estimated in a sequential manner, which simplifies the identification problem compared with other existing work. Structural damage can be detected from the degradation of the identified substructural element stiffness values. The performances of the proposed algorithm are demonstrated by several numerical examples and a lab experiment. Measurement noise effect is considered. Both the simulation results and experimental data validate that the proposed algorithm is viable for structural damage detection of large size structural systems with limited input and output measurements.

A novel sensitivity method to structural damage estimation in bridges with moving mass

  • Mirzaee, Akbar;Shayanfar, Mohsenali;Abbasnia, Reza
    • Structural Engineering and Mechanics
    • /
    • 제54권6호
    • /
    • pp.1217-1244
    • /
    • 2015
  • In this research a theoretical and numerical study on a bridge damage detection procedure is presented based on vibration measurements collected from a set of accelerometers. This method, referred to as "Adjoint Variable Method", is a sensitivity-based finite element model updating method. The approach relies on minimizing a penalty function, which usually consists of the errors between the measured quantities and the corresponding predictions attained from the model. Moving mass is an interactive model and includes inertia effects between the model and mass. This interactive model is a time varying system and the proposed method is capable of detecting damage in this variable system. Robustness of the proposed method is illustrated by correct detection of the location and extension of predetermined single, multiple and random damages in all ranges of speed and mass ratio of moving vehicle. A comparative study on common sensitivity and the proposed method confirms its efficiency and performance improvement in sensitivity-based damage detection methods. In addition various possible sources of error, including the effects of measurement noise and initial assumption error in stability of method are also discussed.

발파 진동 평가의 문제점과 개선방안 (Comparison of Assessment method of Blast Vibration)

  • Chang, Seo-Il;Lee, Jae-Won;Kim, Hyung-Kon
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2002년도 추계학술대회논문초록집
    • /
    • pp.357.2-357
    • /
    • 2002
  • The blast vibration can generate occupants dissatisfy as well as damage of physics nearby building. Then blast vibration estimation issue important problems. But, now blast vibration prediction inside-outside country not established objective method according to blast number to express magnitude of vibration. In this study, Our propoes show our country problem of blast vibration about blast vibration measurement and this problems be able to find improve method. (omitted)

  • PDF

프레임 단위의 AELMS를 이용한 잡음 제거 알고리즘 (Noise Reduction Algorithm using Average Estimator Least Mean Square Filter of Frame Basis)

  • 안찬식;최기호
    • 디지털융복합연구
    • /
    • 제11권7호
    • /
    • pp.135-140
    • /
    • 2013
  • 잡음 추정과 검출 알고리즘에서는 LMS Filter를 이용하여 변화하는 잡음 환경에 빠르게 적응할 수 있도록 한다. 하지만 LMS Filter는 잡음 추정을 위한 일정 시간 동안 적응 시간이 필요하며 신호의 변화가 일어날 경우 더 많은 적응 시간이 소요되는 단점을 가지고 있다. 따라서 이를 보완하기 위하여 프레임 단위의 AELMS Filter를 이용한 잡음 제거 방법을 제안한다. 본 논문은 잡음 환경에서 입력되는 신호를 프레임 단위로 분할하고 평균과 분산을 이용한 예측 LMS Filter를 구성하여 잡음을 제거하므로 잡음 환경이 변화하더라도 빠른 적응 시간으로 잡음을 제거한다. 또한 환경 잡음과 음성 신호가 혼합되어 입력될 때 잡음을 제거하여 음성의 고유 특성을 유지하고 음성 정보 손상을 줄이기 위한 방법이다. 프레임 단위의 AELMS Filter를 이용한 잡음 제거 방법으로 잡음 제거 성능을 평가하였다. 실험 결과 변화하는 환경 잡음을 제거하여 얻은 감쇠도가 평균 6.8dB 향상되었다.

PZT를 이용한 사각구조물 볼트체결상태 계측에 관한 연구 (A Study on Square-Structure Estimation of Fastening Condition of Bolt Using PZT Patches)

  • 김병진;한수현;홍동표;태신호
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2005년도 추계학술대회논문집
    • /
    • pp.860-863
    • /
    • 2005
  • This work presents a study on development of a practical and quantitative technique for assessment of the structural health condition by PZT impedance-based technique associated with longitudinal wave propagation. The bolt fastening condition is adjusted by torque wrench In order to estimate the damage condition numerically, we suggest the evaluation method of impedance peak frequency shift $\Delta$F in this paper.

  • PDF