• 지반과기술
• /
• 제3권3호
• /
• pp.15-22
• /
• 2006

The optimum blasting pattern to excavate a quarry efficiently and economically can be determined based on the minimum production cost, which is generally estimated according to rock fragmentation. Therefore, it is a critical problem to predict fragment size distribution of blasted rocks over an entire quarry. By comparing various prediction models, it can be ascertained that the result obtained from Kuz-Ram model relatively coincides with that of field measurements. Kuz-Ram model uses the concept of rock factor to signify conditions of rock mass such as block size, rock jointing, strength and others. For the evaluation of total production cost, it is imperative to estimate 3-D spatial distribution of rock factor for the entire quarry. In this study, a sequential indicator simulation technique is adopted for estimation of spatial distribution of rock factor due to its higher reproducibility of spatial variability and distribution models than Kriging methods. Further, this can reduce the uncertainty of predictor using distribution information of sample data. The entire quarry is classified into three types of rock mass and optimum blasting pattern is proposed for each type based on 3-D spatial distribution of rock factor. In addition, plane maps of rock factor distribution for each ground level are provided to estimate production costs for each process and to make a plan for an optimum blasting pattern.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2004년도 제5회 정기학술발표대회 논문집
• /
• pp.447-450
• /
• 2004

국내 건설업계는 공기보다는 공사비에 초점을 맞추어 왔다. 그러나 근래에 들어 사회적 요구 변화로 인하여 공기에 대한 관심이 증대되고 있다. 적정한 공사기간은 다른 방면으로서의 비용절감과 관리의 효율성을 줄 수 있다. 특히 공동주택과 같은 경우 대부분의 공정이 타 기업과 유사하여 다른 기업의 장점을 쉽게 얻을 수 있으나 현재 대부분의 기업에서는 공기에 대한 연구가 부족한 형편이다. 본 연구는 공기가 타기업에 비해 짧은 기업을 대상으로 대공정 수준의 일반 공기 산정 기준을 검토하고 이에 따른 기업의 공기 우위요인을 연구하여 공기 산정을 위해 검토하여야 할 요소와 이를 통한 공기 단축에 영향을 줄 수 있는 요소를 제시하려 한다.

• 한국산업융합학회 논문집
• /
• 제10권2호
• /
• pp.105-113
• /
• 2007

Accurate and low-cost sensor localization is a critical requirement for the deployment of wireless sensor networks in a wide variety of application. Sensor position is used for its data to be meaningful and for energy efficient data routing algorithm especially geographic routing. The previous works for sensor localization utilize global positioning system(GPS) or estimate unknown-location nodes position with help of some small reference nodes which know their position previously. However, the traditional localization techniques are not well suited in the senor network for the cost of sensors is too high. In this paper, we propose the sensor localization method with a mobile robot, which knows its position, moves through the sensing field along pre-scheduled path and gives position information to the unknown-location nodes through wireless channel to estimate their position. We suggest using the sensor position estimation method and an efficient mobility path model. To validate our method, we carried out a computer simulation, and observed that our technique achieved sensor localization more accurately and efficiently than the conventional one.

• 여성건강간호학회지
• /
• 제17권4호
• /
• pp.328-336
• /
• 2011

Purpose: The purpose of this study is to develop the optimal nursing fee for nurse-midwifery center (MC) in the national health insurance system. Methods: The three methodologies used to calculate the conversion factors for the MCs in the national health insurance include cost accounting method, sustainable growth rate (SGR) model, and index model. In this study, the macro-economic indicators and the national statistics were used to estimate the conversion factors for the MCs. Results: The optimal nursing fee for the MCs in 2011 was estimated to be an increase of 57.7% by cost accounting analysis, a decrease of 17.1% by SGR model, and a decrease of 16.1% by index model. The results from SGR model and index model could had been biased due to the upswing of medical spendings in the short-term period (2008~2009). A sensitivity analysis of pre-delivery subsidy program for OB & GYN hospitals and clinics showed that the program has substantially diminished the demand for the MC services. Conclusion: More reliable methodologies to estimate nursing fees precisely are required to prove the value of nurses' services and a government subsidy program for the MC services should be followed from a social perspective.

• Environmental Analysis Health and Toxicology
• /
• 제19권1호
• /
• pp.49-58
• /
• 2004

It is important to select a risk based priority area for environmental policy formation and decision-making. We estimated the health risks and associated damage costs from exposure to fine particles and assigned priority areas for twenty -five districts in Seoul. In order to estimate the theoretical mortality incidence of the health risk, baseline risks were estimated from mortality rates in two low level areas of fine particles, Seocho Gu and Cheju city To estimate the damage cost from the risk estimates, we investigated and estimated the willingness to pay (WTP) for specific risk reduction. We assumed two different locations as the reference area, Cheju city as Scenario I and Seocho gu as Scenario II. From the results, the five districts, Kwangjin, Chungnang, Kangbuk, Nowon, and Kangnam, ranked high in the categories of both health risk and economic risk. Damage costs were over twenty billion won in each of these districts. As there are uncertainties in these results, the parameter values such as PM$_{2.5}$ level, dose -response slope factor, baseline risk, exposure population and WTP should be continuously validated and refined.d.

• 전기학회논문지
• /
• 제57권12호
• /
• pp.2291-2299
• /
• 2008

Hall effect force sensors have been used to measure clamping force in conventional Electric Parking Brake(EPB) systems. Estimation of clamping force without the sensors has drawn attentions due to mounting space limitations and cost issues. Removing the sensor requires the estimation of the initial contact point where the clamping force is effectively applied to the brake pads. In this paper, we propose how to estimate the initial contact point finding the relation between the angular velocity of an actuator and the initial contact point. For force estimation a look-up table is used as a function of the displacement of parking cable from the initial contact point. The proposed method is validated by experiments. From the experimental results we observe that the proposed method satisfies the specifications. The designed method is also able to estimate clamping force although parking cables are loosened and brake pads are worn out. Applying the proposed method enables manufacturing of low cost EPB systems.

• 수산해양교육연구
• /
• 제27권3호
• /
• pp.821-832
• /
• 2015

The aims of this study are to estimate the optimal vessel reduction scales and these direct economic effects of coastal and offshore fisheries in the Republic of Korea. To estimate respectively optimal fishing efforts of individual fishery by species in coastal and offshore fisheries, we adopted appropriate fishing power of each species published by National Fisheries Research and Development Institute and also considered biological and socio-economic factors such as the bycatch rate, the profit rate, the efficiency of resource use, the average age of fishing vessel, the intention of vessel reduction, and the annual changes in vessels by other factors. The direct economic effects of the optimal vessel reduction in coastal and offshore fisheries based on maximum sustainable yield and 2/3 maximum sustainable yield was calculated by a cost-benefit analysis. This study showed that optimal reduction numbers of vessels engaged in coastal and offshore fisheries were 4,431 and 374 vessels and the direct economic effects in coastal and offshore fisheries were about 371.7 and 569.4 billion won and these NPV and BCR were 111.7 billion won and 1.65 and 342.6 billion won and 4.97 respectively.

• 전기학회논문지
• /
• 제59권11호
• /
• pp.2108-2113
• /
• 2010

The Long Term Evolution (LTE) system is based on the Orthogonal Frequency Division Multiplexing (OFDM) and relies its channel estimation on the lattice-type pilot samples in the multipath fading channel environment. The estimation of the channel frequency response (CFR) makes use of the least squares estimate (LSE) for each pilot samples, followed by an interpolation both in time- and in frequency-domain to fill up the channel estimates for subcarriers corresponding to data samples. Any interpolation scheme could be adopted for this purpose. Depending on the requirements of the target system, we may choose a simple linear interpolation or a sophisticated one. For any choice of an interpolation scheme, these is a trade-off between estimation accuracy and numerical cost. For those wireless communication systems based on the OFDM and the preamble-type pilot structure, the DFT-based channel estimation and its variants have been successfully. Yet, it may not be suitable for the lattice-type pilot structure, since the pilot samples are not sufficient to provide an accurate estimate and it is known to be sensitive to the location as well as the length of the time-domain window. In this paper, we propose a simple interpolated based on the upsampling mechanism in the multirate signal processing. The proposed method provides an excellent alternative to the DFT-based methods in terms of numerical cost and accuracy. The performance of the proposed technique is verified on a multipath environment suggested on a 3GPP LTE specification.

• 한국조경학회지
• /
• 제22권1호
• /
• pp.1-16
• /
• 1994

This paper examines the individual and social values of tour and recreation activities related to the characteristics and attractions of parks in urban area through a questionnaire. The data for this research consists of 2,942 samples based on interviews in sixteen parks in Daegu area. Implications of the findings for urban parks design and tour and recreation policy are discussed. Travel cost method and contingent valuation method are applied essentially. These methods yield a reasonable estimation of the relationship between tour and recreation values of the parks and the visit rate which can be used to estimate demand functions for tour and recreation experiences provided by a site. Semilog-type models can be used to estimate the use of the park. Finally, the tour and recreation value of each park per user-day is estimated by the total experiences of the users. This study is a modest but important step in the investigation of urban parks and recreation site demand and values. Many of the developments in contingent valuation method and travel cost modeling should now be applied to the urban scale parks and recreation sits. Such studies will contribute significantly to the improvement of methodology for tour and recreation values measuring, especially to individual and social benefits for the urban parks, and provide the much needed guidance for the allocation of scarce tour and recreation resources.

• 설비공학논문집
• /
• 제18권10호
• /
• pp.768-775
• /
• 2006

The water supply system has been designing by decision process such as calculation of water supply amount, capacity of water tanks and pumps, pipe size. Especially, when we estimate excessively water supply amount, the initial cost and running cost will increase according to enlargement of the water tank and pump capacity, and water quality of ground water tank can become worse. Therefore, calculation of water supply amount is basically most important factor. In order to calculate exactly water supply amount applying domestic real situation, we should set up basic data as well as study calculation methods. This research would consider calculation methods of water supply amount for school building through examine domestic and foreign basic data of water supply amount and characteristics of domestic school, and estimate daily water supply in high school.