• 비파괴검사학회지
• /
• 제11권2호
• /
• pp.22-31
• /
• 1991

Various types of ultrasonic techniques have been used for the estimation of compressive strength of concrete structures. However, conventional ultrasonic velocity method using only longitudial wave cannot be determined the compressive strength of concrete structures with accuracy. In this paper, by using the introduction of multiple parameter, e. g. velocity of shear wave, velocity of longitudinal wave, attenuation coefficient of shear wave, attenuation coefficient of longitudinal wave, combination condition, age and preservation method, multiple regression analysis method was applied to the determination of compressive strength of concrete structures. The experimental results show that velocity of shear wave can be estimated compressive strength of concrete with more accuracy compared with the velocity of longitudinal wave, accuracy of estimated error range of compressive strength of concrete structures can be enhanced within the range of ${\pm}$10% approximately.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.195-198
• /
• 2002

Demand for high precision measurement of large area is increasing in many industrial fields. White-light Scanning Interferometer(WSI) is a well-known method for 3D profile measurement. However WSI has some limitations in a measurement range because of the sensing mechanism. Therefore, in this paper we use a heterodyne laser interferometer to get over the limitations of a short measurement range in WSI, We suggest a new WSI system combined with heterodyne laser interferometer. This system is aimed at eliminating Abbe error with measuring the focus point directly. With the use of triggering functionality of WSI, we can use this system as a probe of a precision stage such as a probe of CMM. The suggested system gives a repeatability of 87 nm in the absolute distance measurement test under the laboratory environment.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.341-346
• /
• 2002

This study is intended to check the possibility to estimate water content by heat-drying method with variation of W/C and slump. According to the results, in case of electric range method, when water content is less than 165kg/m$^3$ in mixture, it is estimated more and in more than 165kg/m$^3$, it is estimated less. It shows that water content in gas burner method is estimated less by about 2kg/m$^3$. Also, estimated water content shows difference by less than 12kg/m$^3$ in electric range method and by less than 12kg/m$^3$ in gas burner method. Therefore, it is thinked that if tested without error from preparing a sample to calculating amount of water, water content will be estimated exactly in the construction field.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.576-578
• /
• 1994

In this. paper, a new technique to estimate both the instantaneous speed and disturbance load torque using a low precision shaft encoder in very low speed range is proposed. To detect the instantaneous speed and disturbance load torque, the Kalman filter which is an optimal full order estimator is used. Experimental results conform the validity of the proposed estimation technique. The effects of parameter variations are discussed, and it is verified that the system is robust to the modeling error.

• 한국자기공명학회논문지
• /
• 제20권1호
• /
• pp.7-12
• /
• 2016

PTMEG(Polytetramethylene ether glycol) is a polymer compound widely used as a wide range of applications in the textile industry. PTMEG substance carrying various 1,800~2,000 molecular weight are mainly used as the raw material of the spandex production. Molecular weight and degree of polymerization value for 4 different PTMEG samples under pilot plant scale synthetic process were determined by a new quantitative NMR method. In NMR experiments, p-toluenesulfonic acid(TSOH) was used for external standard material of PTMEG quantitative analysis. were measuring The concentration of the primary standard TSOH was measured by UV/Vis spectroscopy. By using NMR peak assignments and the integral values of designated proton NMR peaks, We were able to measure the % composition of the synthetic PTMEG polymers, concentrations, molecular weight and the degree of polymerization that show the synthetic process of each manufacturing pilot plant. By utilizing a newly developed quantitative NMR method were able to obtain the molecular weight of PTMEG samples within 0.08 error % range.

• Journal of Biosystems Engineering
• /
• 제33권4호
• /
• pp.269-275
• /
• 2008

This study was conducted to design an impedance sensor that can measure soil water content of soils. Partial least square regression (PLSR) was applied to soil impedance data preprocessed with a smoothing method. An optimal sub-spectrum size and wavelength range were determined by comparing the coefficient of determination ($R^2$) and root mean square error (RMSE) of the PLSR models obtained using soil impedance data. various PLS analysis. Based on the PLSR analysis, it would be concluded that the optimal spectrum measurement range was $32.0{\sim}50.0\;MHz$ with the optimal sub-spectrum size of about 18.5 MHz.

• 한국음향학회지
• /
• 제18권4호
• /
• pp.78-83
• /
• 1999

이 논문은 희소어레이의 최적패턴 형성을 위하여 원하는 패턴과 실제 희소어레이의 패턴간의 오차의 자승치를 최소화하는 방법을 제시한다. 센서의 간격이 어레이 중심에 관하여 대칭인 경우와 비대칭인 경우에 대하여 성능을 점검하며, 어레이 공간의 주어진 영역의 오차함수에 성능 향상을 위하여 계수를 적용한다. 주빔 부근의 측면롭의 효과적인 제어를 위하여 지수 함수적인 계수를 제안하였으며 그 결과 측면롭의 수준이 전체적으로 균등하게 분포되는 패턴을 얻을 수 있었다. 이 결과는 입력잡음신호가 어레이 공간상에 균등하게 입사될 때 효과적으로 사용될 수 있다.

• 제어로봇시스템학회논문지
• /
• 제15권4호
• /
• pp.379-384
• /
• 2009

A human gaze detection and tracing method is importantly required for HMI(Human-Machine-Interface) like a Human-Serving robot. This paper proposed a novel three-dimension (3D) human gaze estimation method by using a face recognition, an orientation estimation and SVMs (Support Vector Machines). 2,400 images with the pan orientation range of $-90^{\circ}{\sim}90^{\circ}$ and tilt range of $-40^{\circ}{\sim}70^{\circ}$ with intervals unit of $10^{\circ}$ were used. A stereo camera was used to obtain the global coordinate of the center point between eyes and Gabor filter banks of horizontal and vertical orientation with 4 scales were used to extract the facial features. The experiment result shows that the error rate of proposed method is much improved than Liddell's.

• 대한전자공학회논문지
• /
• 제27권12호
• /
• pp.1889-1893
• /
• 1990

In this paper, ultrasonic microscope system has been constructed with the small aperturre acoustic lens and the angle controller, and the new type of B-scanultransonic imaging has been analyzed. The system with small aperture lens was used to detect flaw existing within the thick specimen and its resolution was in the range of one wavelength at interior plane of sample. The anle controller was used to excited surface acoustic wave or shear wave. In order to obtain B-scan image of the flaw existig at interior of solids, shear wave has been excited and backscattering signals from the flaw have been processed. In experimental results, B-scan ultransonic images have been obtain from the flaws of varable shape and measured flaw size from the images has been in good agreement with practical size in the range of 10% error.

• 대한전기학회논문지
• /
• 제35권11호
• /
• pp.495-502
• /
• 1986

The change of the discharge characteristics of the high-pressure sodium (HPS) lamps is investigated over a power source frequency range of 60 Hz to 30, 000 Hz. As the frequency increases, the light and electrical characteristics of the HPS lamps are improved since the re-ignition is not needed due to the constant electron density, and the cathode fall is reduced. But at the certain frequency range, the arc instability called acoustic resonance occurs, and the arc tube is damaged. Regarding these characteristics and the kind of the illuminating system, a proper frequency is selected to operate the HPS lamps. And a new measuring system using a computer and the storage-scope is developed to avoid the error of the ordinary gauges at high frequency power.