• Journal of the Korean Society for Marine Environment & Energy
• /
• v.8 no.1
• /
• pp.17-22
• /
• 2005

The movement of drifting ships on the sea is closely related to marine environmental forces such as waves, currents, winds, etc. To develop a prediction model for trajectories oi drifting ships, an experiment on the movement of drifting ships was carried out in the Southeastern Sea of Korea. Five types of ships including a lire raft and tour ships with G/T 10tons, G/T 2o tons, G/T 50 tons, and G/T 80 tons, were considered in the experiment. The G/T 50 ton class ship was used as a base ship for obtaining the currents, winds and heading angles of ship following the trajectory. The trajectory of each ship was measured by DGPS(Differential Global Positioning System) and collected using APRS(Automatic Position Reporting System) installed on the base ship. The error range in position fix of DGPS are approximately ±1 m. The drift speed of ship in the experiment was between 3％ to 5％ of wind speed and drift direction of ship was deflected by ±90° from wind direction. Also, the heading of drifting ship was normal to wind direction.

• Journal of Astronomy and Space Sciences
• /
• v.18 no.3
• /
• pp.239-248
• /
• 2001

Far-ultraviolet IMaging Spectrograph (FIMS) is the main payload of the first Korean scientific satellite, KAISTSAT-4, which will be launched in 2002. Among the optical parts, parabolic cylinder mirror does not have any heritage from previous astronomical missions, so the manufacturing and testing process itself is a challenging issue. We describe the method of manufacturing and measuring of the off-axis parabolic cylinder mirror and our initial experiments to establish the entire manufacturing process. Using the method, the profile error can meet the specification of $lambda$ per cm which is closely related with the astronomical performances. In case of the surface roughness, temperature controlled pitch polishing reduces $R_{q}$ under 1 nm implying that scattering in the entire spectral range of FIMS is less than 2% of the incident UV light.

• Journal of Pharmacopuncture
• /
• v.11 no.1
• /
• pp.55-69
• /
• 2008

Objective : We investigated the effects of distilled Wild Ginseng Herbal Acupuncture on autonomic nervous system with the Heart Rate Variability(HRV) in adult man. as well as we tried to observe how distilled Wild Ginseng Herbal Acupuncture on the balance of the autonomic nervous system. Method : We investigated the effects of distilled Wild Ginseng Herbal Acupuncture on autonomic nervous system with the Heart Rate Variability(HRV) in adult man. as well as we tried to observe how distilled Wild Ginseng Herbal Acupuncture on the balance of the autonomic nervous system. 1 healthy volunteers consisted of 31 subjects in experiment(distilled Wild Ginseng Herbal Acupuncture) group and 30 subjects in control(Normal Saline) group. Study form was a randomized, placebo-controlled, double-blind clinical trial. 31 subjects in experiment group were injected distilled Wild Ginseng Herbal Acupuncture at $GB_{21}$(Kyonjong) and 30 subjects in control group were injected Normal Saline at $GB_{21}$(Kyonjong). except of 2 subjects(in control group) who can't be measured and 11 subjects(7 in experiment group and 4 in control group) who move or make unforceable error during measuring. Finally 24 subject in experiment group and 24 subject in control group are studied. We measured HRV by PolyG-I on 7 times : before and after injection per 5 minutes during 30 minutes. The SPSS 10.0 for windows was used to analyze the data and the paired t-test(in group) and Student t-test(between two groups) were used to verify the result. Result : 1. After distilled Wild Ginseng Herbal Acupuncture injection, Mean HRV is significantly low only for first 5 minute, SDNN is significantly high after 5 minute, Complexity is significantly low after 5 minute, HRV index is significantly high after 10 minute and pNN50 is significantly low after 5 minute. 2. SDNN of distilled Wild Ginseng Herbal Acupuncture Group significantly increased from 20minute to 25minute, and pNN50 of distilled Wild Ginseng Herbal Acupuncture Group significantly decreased from 10minute to 15minute and 20 minute to 30 minute compared with those of Normal Saline group. 3. After distilled Wild Ginseng Herbal Acupuncture injection, Ln(TP), Ln(VLF) and Ln(LF) are significantly high after 5 minute, normalized LF is significantly high after 5 minute and normalized HF is significantly low after 5 minute. 4. Ln(TP) and Ln(VLF) of distilled Wild Ginseng Herbal Acupuncture Group significantly increased from 20minute to 25 minute compared with those of Normal Saline group. Conclusion : The results suggest that distilled Wild Ginseng Herbal Acupuncture in healthy adult man tend to activate the autonomic nervous system and sympathetic nervous system compared to Normal Saline within normal range.

• Journal of Pharmacopuncture
• /
• v.12 no.3
• /
• pp.31-40
• /
• 2009

Objective : This study was to investigate the effects of distilled Cervi Pantotrichum Cornu Pharmacopuncture and Zizyphi Spinosi Semen Pharmacopuncture on autonomic nervous system with Heart Rate Variability(HRV). Purpose of the trial was to observe what influence distilled Cervi Pantotrichum Cornu Pharmacopuncture and Zizyphi Spinosi Semen Pharmacopuncture have on the autonomic nervous system. Methods : 60 healthy male volunteers were divided into three groups which consist of two experimental groups such as Cervi Pantotrichum Cornu Pharmacopuncture and Zizyphi Spinosi Semen Pharmacopuncture, and a control group. Study design was a randomized, placebo-controlled, double-blind clinical trial. 20 subjects in experimental group were injected distilled Cervi Pantotrichum Cornu Pharmacopuncture at $GB_{21}$(Kyonjong), 20 subjects in other experimental group were injected distilled Zizyphi Spinosi Semen Pharmacopuncture and 20 subjects in control group were injected Normal Saline at $GB_{21}$(Kyonjong). One volunteer of each groups were excluded from analysis because of error during measuring HRV. At the end of the study 57 volunteers completed HRV analysis. HRV was measured by QECG-3:LXC3203(LAXTHA Inc. Korea) at P0, P1, P2, P3, P4, P5 and P6 and its time-course dependent change in each group was analyzed using paired t-test, and the difference of HRV fluctuation among two experimental group and a control was evaluated by one way ANOVA(p<0.05). Results : A. Time Domain Analysis 1. Analysis of Mean HRV, SDNN and Complexity After injection of distilled Cervi Pantotrichum Cornu Pharmacopuncture, Mean HRV was significantly decreased only at 20 minutes after injection. SDNN was significantly increased from 15 minute after injection. Complexity was significantly decreased only at 15 minute after injection. After injection of distilled Zizyphi Spinosi Semen Pharmacopuncture, Complexity was significantly decreased at 10, 15 and 30 minutes after injection. 2. Analysis of HRV index, pNN50 After injection of distilled Cervi Pantotrichum Cornu Pharmacopuncture, pNN50 was significantly decreased at 15, 20 and 25 minutes after injection. Compared with Normal Saline injection, distilled Cervi Pantotrichum Cornu Pharmacopuncture and Zizyphi Spinosi Semen Pharmacopuncture showed significant difference on HRV index and pNN50 at 5 minutes after injection. B. Frequency Domain Analysis 1. Analysis of Ln(TP), Ln(VLF) After injection of distilled Cervi Pantotrichum Cornu Pharmacopuncture, Ln(TP) was significantly increased at 15 and 30 minutes after injection. Ln(VLF) was significantly increased at 10, 15 and 30 minutes after injection. After injection of distilled Zizyphi Spinosi Semen Pharmacopuncture, Ln(VLF) was significantly increased only at 30 minutes after injection. Compared with Normal Saline injection, distilled Cervi Pantotrichum Cornu Pharmacopuncture showed significant difference on Ln(TP) after 5 minutes of injection. Conclusions : Our results suggest that Cervi Pantotrichum Cornu Pharmacopuncture and Zizyphi Spinosi Semen Pharmacopuncture in healthy adult man tend to activate the autonomic nervous system and sympathetic nervous system compared to Normal Saline within normal range.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.42-48
• /
• 2016

In this paper, a high-precision peak detector circuit that detects the output voltage information of a fly-back converter is proposed. The proposed design consists of basic analog elements with only one operational amplifier and three transistors. Because of its simple structure, the proposed circuit can minimize the delay time of the detection process, which has a strong impact on the precision of the regulation aspect of the fly-back converter. Furthermore, by using an amplifier and several transistors, the proposed detector can be fully integrated on-chip, instead of using discrete circuit elements, such as capacitors and diodes, as in conventional designs, which reduces the production cost of the fly-back converter module. In order to verify the performance of the proposed scheme, the peak detector was simulated and implemented by using a 0.35 m MagnaChip process. The gained results from the simulation with a sinusoidal stimulus signal show a very small detection error in the range of 0.3~3.1%, which is much lower than other reported detecting circuits. The measured results from the fabricated chip confirm the simulation results. As a result, the proposed peak detector is recommended for designs of high-performance fly-back converters in order to improve the poor regulation aspect seen in conventional designs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.734-739
• /
• 2016

The globe valve is a linear motion valve that is designed primarily to stop, start, and regulate flow. The disk of a globe valve can be removed totally from the flow path or it can completely close the flow path. In this study, numerical analysis using ANSYS-CFX was initially performed to predict the flow coefficient and build a prototype model of a globe valve. The flow coefficient is the volume of water at $15.6^{\circ}C$ that will flow per minute through a valve with a pressure drop of 1 psi across the valve. In other words, it is an important factor for determining the size of the valve. From the analysis results, the fluid flux of water and flow coefficient of the valve were extracted. From the numerical results, a prototype of ultra-fine precision control valve, which can regulate the fluid flow of range 0 ~ 0.1 gal per min, was developed. The experimental results were compared with the numerical results using the flow coefficient ($C_v$) graph. From the comparative results, the flow coefficient ($C_v$) error percentage between the numerical and experimental results was very low, which is acceptable, proving that the proposed prototype model is convincing. In addition, it is possible to predict the flow coefficient using only numerical analysis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.434-441
• /
• 2016

Friction Stir Welding (FSW) is a solid-state joining process involving the frictional heat between the materials and tools. The amount of heat conducted into the workpiece determines the quality of the welded zone. Excessive heat input is the cause of oxides and porosity defects, and insufficient heat input can cause problems, such as tunnel defects. Therefore, analyzing the temperature history and distribution at the center of the Friction Stir Welded zone is very important. In this study, the temperature distribution of the friction stir welding region of an AZ61 magnesium alloy was investigated. To achieve this goal, the temperature and metal flow was predicted using the finite element method. In FE analysis, the welding tool was simplified and the friction condition was optimized. Moreover, the temperature measuring test at the center of the welding region was performed to verify the FE results. In this study, the tool rotation speed was a more dominant factor than the welding speed. In addition, the predicted temperature at the center of the welding region showed good agreement with the measurement results within the error range of 5.4% - 7.7%.

• The Journal of Korean Society for Radiation Therapy
• /
• v.18 no.2
• /
• pp.75-80
• /
• 2006

Purpose: In radiation therapy, precise calculation of dose toward malignant tumors or normal tissue would be a critical factor in determining whether the treatment would be successful. The Radiation Treatment Planning (RTP) system is one of most effective methods to make it effective to the correction of dose due to CT number through converting linear attenuation coefficient to density of the inhomogeneous tissue by means of CT based reconstruction. Materials and Methods: In this study, we carried out the measurement of CT number and calculation of mass density by using RTP system and the homemade inhomogeneous tissue Phantom and the values were obtained with reference to water. Moreover, we intended to investigate the effectiveness and accuracy for the correction of inhomogeneous tissue by the CT number through comparing the measured dose (nC) and calculated dose (Percentage Depth Dose, PDD) used CT image during radiation exposure with RTP. Results: The difference in mass density between the calculated tissue equivalent material and the true value was ranged from $0.005g/cm^3\;to\;0.069g/cm^3$. A relative error between PDD of RTP and calculated dose obtained by radiation therapy of machine ranged from -2.8 to +1.06%(effective range within 3%). Conclusion: In conclusion, we confirmed the effectiveness of correction for the inhomogeneous tissues through CT images. These results would be one of good information on the basic outline of Quality Assurance (QA) in RTP system.

• Journal of Navigation and Port Research
• /
• v.34 no.8
• /
• pp.603-607
• /
• 2010

The LORAN system had been used widely and it was an essential navigation aid for ships in the ocean until the GPS is adopted actively. In particular, it was essential functionality for the ships to sail the oceans. According to the advancement of industry, however, the current accuracy of traditional Loran is insufficient for the utilization of harbour approach, land navigation, and the field of survey and timing. Therefore it is necessary that the study on the improvement of the positioning accuracy of Loran. The one of the improving methods is to measure and compensate the propagation time delay between the transmitter and user's receiver, which is called as additional secondary factor (ASF). In this study, we measured the ASF between the Pohang master transmitting station (9930M) and four points where locate within 33 km apart from the transmitting station, using the measuring technique of the absolute time delay without a time of coincidence (TOC) table. As the result of measurement, the ranging error caused by the propagation delay was about 210 m at 33 km, however it can be reduced up to 40 m with ASF compensation.

• The KIPS Transactions:PartD
• /
• v.11D no.5
• /
• pp.1011-1020
• /
• 2004

A lot of work has been done to improve the I/O performance of such a system that store and manage a massive amount of data by distributing them across multiple disks and access them in parallel. Most of the previous work has focused on an efficient mapping from a grid ceil, which is determined bY the interval number of each dimension, to a disk number on the assumption that each dimension is split into disjoint intervals such that entire data space is GRID-like partitioned. However, they have ignored the effects of a GRID partitioning scheme on declustering performance. In this paper, we enhance the performance of mapping function based declustering algorithms by applying a good GRID par-titioning method. For this, we propose an estimation model to count the number of grid cells intersected by a range query and apply a GRID partitioning scheme which minimizes query result size among the possible schemes. While it is common to do binary partition for high-dimensional data, we choose less number of dimensions than needed for binary partition and split several times along that dimensions so that we can reduce the number of grid cells touched by a query. Several experimental results show that the proposed estimation model gives accuracy within 0.5% error ratio regardless of query size and dimension. We can also improve the performance of declustering algorithm based on mapping function, called Kronecker Sequence, which has been known to be the best among the mapping functions for high-dimensional data, up to 23 times by applying an efficient GRID partitioning scheme.