• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제16권3호
• /
• pp.331-335
• /
• 2010

무선 센서 네트워크에서 중요한 이슈 중 하나는 배치되는 센서 노드들이 최대한 요래 지속되도록 전력 소비를 줄이는 것과, 네트워크를 시간 동기화 하는 것이다. 기존의 저 전력 시간 동기화 알고리즘은 취침모드에 대한 고려 없이 교환되는 패킷의 수를 줄이거나, 네트워크 토폴로지에 따라 다른 시간 동기화 방법을 사용하는 하이브라드 방법이 전부였다. 무선 센서 네트워크에서 효율적인 에너지 절약 방법은 노드의 취침을 통한 duty cycle의 감소이기 때문에, 본 논문에서는 노드의 취침을 통해 duty cycle을 줄일 수 있는 시간 동기화 알고리즘을 제안하였다. 알고리즘 제안 시, 실험을 통해 노드 구성요소의 특성을 파악하여 모델을 세운 후 접근하였다. 제안한 알고리즘의 성능 파악을 위해 네트워크에 요구되는 시간 동기화 정확도가 있을 때, 이를 만족시키기 위한 시간 동기화 주기 값을 구해보았으며, 노드 사이의 편차율을 구할 때 걸리는 시간을 확률적인 개념을 사용해 분석하여 보았다. 제안된 알고리즘을 $3{\times}3$ 격자(grid) 구조에서 구현해본 결과, duty cycle 5%, 시간동기 주기 10초일 때, 107.57 $\mu{s}$의 평균 시간동기 오차를, duty cycle 2.5%, 시간동기 주기 20초일때, 130 $\mu{s}$의 평균 시간동기 오차를 보여주었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.108.2-108.2
• /
• 2005

• 한국정밀공학회지
• /
• 제26권3호
• /
• pp.73-80
• /
• 2009

In accordance with the trend for high-speed multi-axes, and the increasing technical sophistication of machine tools, thermal deformation has become an important factor in the accuracy of machine tools. It was analyzed that thermal deformation error accounts for about 70% of all errors made with machine tools. For precise temperature control, both cooling and heating should be implemented. A hot gas bypass type cooling cycle method has a simplified structure and temperature control accuracy to with in ${\pm}0.1^{\circ}C$. In this study, the performances of oil cooler system, including temperature controllability according to hot gas floe and preset temperature sustainability according to temperature load, were tested. It is expected that this study will contribute to the development and performances of oil cooler system, which could minimize thermal errors and improve the quality of precision machine tools.

• 한국정밀공학회지
• /
• 제19권11호
• /
• pp.221-227
• /
• 2002

Tapping is a machining process that makes a female screw on parts to be assembly together. Recently, as the number of small and compact products increases the radius of tap as small as 1 mm is not unusual and more accurate tapping is needed. In complying with those needs, some high-speed tapping machines with synchronizing function have been developed. This paper describes the development of an ultra high-speed tapping machine up to 10,000rpm. The key factors in the tapping speed are the acceleration/deceleration and the synchronizing errors between spindle motor and fred motor. To minimize the acceleration/deceleration time, a low inertia spindle with a synchronous built-in servo motor was developed. To minimize the synchronizing errors, the tapping cycle algorithm was optimized on an open architecture CNC. The developed tapping machine has the acceleration/deceleration time of 0.13sec/10,000rpm for rigid tapping and the synchronizing error below 4.4%. The cycle time for tapping a female screw of M3 and depth 2 times diameter was 0.55sec.

• 천문학회지
• /
• 제47권6호
• /
• pp.255-258
• /
• 2014

Using sunspot number data from 270 historical stations for the period 1981-2013, we investigate their personal reduction coefficients (k) statistically. Chang & Oh (2012) perform a simulation showing that the k varies with the solar cycle. We try to verify their results using observational data. For this, a weighted mean and weighted standard deviation of monthly sunspot number are used to estimate the error from observed data. We find that the observed error (noise) is much smaller than that used in the simulation. Thus no distinct k-variation with the solar cycle is observed contrary to the simulation. In addition, the probability distribution of k is determined to be non-Gaussian with a fat-tail on the right side. This result implies that the relative sunspot number after 1981 might be overestimated since the mean value of k is less than that of the Gaussian distribution.

• 대한기계학회논문집A
• /
• 제24권3호
• /
• pp.634-644
• /
• 2000

Fatigue crack growth and life is estimated by various fracture mechanical parameters but affected by load, material and environment. Fatigue character of component without surface notch cannot be e valuated by above-mentioned parameters due to microstructure of in-service material. Single fracture mechanical parameter or nondestructive parameter cannot predict fatigue damage in arbitrary boundary condition but multiple fracture mechanical parameters or nondestructive parameters can Fatigue crack growth modelling with three point representation scheme uses this merit but has limit on real-time monitoring. Therefore, this study shows fatigue damage model using backpropagatior. neural networks on the basis of X-ray half breadth ratio B/$B_o$ fractal dimension $D_f$ and fracture mechanical parameters can predict fatigue crack growth rate da/dN and cycle ratioN/$N_f$ at the same time within engineering estimated mean error(5%).

• 제어로봇시스템학회논문지
• /
• 제16권2호
• /
• pp.188-193
• /
• 2010

With GPS being the primary navigation system, Loran use is in steep decline. However, according to the final report of vulnerability assessment of the transportation infrastructure relying on the global positioning system prepared by the John A. Volpe National Transportation Systems Center, there are current attempts to enhance and re-popularize Loran as a GPS backup system through the characteristic of the ground based low frequency navigation system. To advance the Loran system such as Loran-C modernization and eLoran development, research is definitely needed in the field of Loran-C receiver signal processing as well as Loran-C signal design and the technology of a receiver. We have developed a set of Matlab tools, which implement a software Loran-C receiver that performs the receiver's position determination through the following procedure. The procedure consists of receiving the Loran-C signal, cycle selection, calculation of the TDOA and range, and receiver's position determination through the Least Square Method. We experiences the effect of an incorrect cycle selection and various error factors (ECD, ASF, sky wave, CRI, etc.) from the result of the Loran-C signal processing. It is apparent that researches which focus on the elimination and mitigation of various error factors need to be investigated on a software Loran-C receiver. These aspects will be explored in further work through the method such as PLL and Kalman filtering.

• Journal of Mechanical Science and Technology
• /
• 제19권7호
• /
• pp.1393-1404
• /
• 2005

Fatigue crack growth and life have been estimated based on established empirical equations. In this paper, an alternative method using artificial neural network (ANN) -based model developed to predict fatigue damages simultaneously. To learn and generalize the ANN, fatigue crack growth rate and life data were built up using in-plane bending fatigue test results. Single fracture mechanical parameter or nondestructive parameter can't predict fatigue damage accurately but multiple fracture mechanical parameters or nondestructive parameters can. Existing fatigue damage modeling used this merit but limited real-time damage monitoring. Therefore, this study shows fatigue damage model using backpropagation neural networks on the basis of X -ray half breadth ratio B / $B_o$, fractal dimension $D_f$ and fracture mechanical parameters can estimate fatigue crack growth rate da/ dN and cycle ratio N / $N_f$ at the same time within engineering limit error ($5\%$).

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제23권2호
• /
• pp.65-92
• /
• 2019

We survey a recently developed immersed finite element method (IFEM) for the interface problems. The IFEM uses structured grids such as uniform grids, even if the interface is a smooth curve. Instead of fitting the curved interface, the bases are modified so that they satisfy the jump conditions along the interface. The early versions of IFEM [1, 2] were suboptimal in convergence order [3]. Later, the consistency terms were added to the bilinear forms [4, 5], thus the scheme became optimal and the error estimates were proven. For elasticity problems with interfaces, we modify the Crouzeix-Raviart based element to satisfy the traction conditions along the interface [6], but the consistency terms are not needed. To satisfy the Korn's inequality, we add the stabilizing terms to the bilinear form. The optimal error estimate was shown for a triangular grid. Lastly, we describe the multigrid algorithms for the discretized system arising from IFEM. The prolongation operators are designed so that the prolongated function satisfy the flux continuity condition along the interface. The W-cycle convergence was proved, and the number of V-cycle is independent of the mesh size.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.192-198
• /
• 2000

Three dimensional thermal cycle analysis of the plunger is carried out in repeated forming process of the TV glass, which is continued work of two dimensional analysis where an efficient method has been proposed. The plunger undergoes temperature fluctuation during a cycle due to the repeated contact and separation from the glass, which attains a cyclic steady state having same temperature history at every cycle. Straightforward analysis of this problem brings about more than 90 cycles to get reasonable solution. An exponential function fitting method is proposed, which finds exponential function to best approximate temperature values of 3 consecutive cycles, and new cycle is restarted with the fitted value at infinite time. Number of cases are analyzed using the proposed method and compared to the result of straightforward repetition, from which one finds that the method always reaches nearly convergent solution within $9{\sim}12$ cycles, but turns around afterwards without further convergence. Two step use is found most efficient, in which the exponential fitting is carried out fer the first 12 cycles, followed by simple repetition, which shows fast convergence expending only 6 additional cycles to get the accuracy within 2 error. This reduces the computation cycle remarkably from 90 to 18, which is 80% reduction. From the parametric studies, one reveals that the overall thermal behavior of the plunger in terms of cooling parameters and time is similar to that of 2 dimensional analysis.