• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.14 no.5
• /
• pp.127-136
• /
• 2011

This study was conducted on the field application for a method which is currently used. Although the method was performed with experimental knowledge, this study attempted to approach scientific ways through thirty sets of test-bed and three times monitoring limited by control variations for three months. The factors on previous studies are slope location, slope degree, type (roadfill vs. roadcut), aspect, vegetation cover, species, thickness, vertical length, horizontal length, soil type, elevation, erosion, soil-moisture, soil-hardness, pH, and so on. However, the factors of a suitable and significant level are slope degree, type, aspect, thickness, soil-moisture, vertical length and horizontal length in slope revegetation. the results were as follows : As a result of survey on soil types based on the status before construction, the rate of vegetation cover with non-mesh construction in soil areas was better than the rate of vegetation cover with fiber meshes and wire meshes. The rate of vegetation cover with fiber meshes in weathered rocks was better than using wire meshes. The rate of vegetation cover with the wire meshes in blasted rocks was better than using fiber meshes. Also, the factors affecting the rate of vegetation cover presented the number of appearance species, soil-moisture, thickness. this result presented the more appearance species as a positive role, and the lower soil-moisture and the thicker soil as a negative role.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.25 no.1
• /
• pp.73-81
• /
• 1997

This study was conducted to find out the hydroseeding timing of woody plants. Five native plants were used for this experiment and were seeded on the cut slopes by hands in April, May, June, September and October. In order to identify the best seeding time, germination percentage, ground cover rate and plant height were investigated. There was a difference in germination percentage and ground cover rate depending on the seeding time. The results are summerized as follows 1. Characteristics of germination : Seeding was best carried out in spring(May, June) or autumn(September). In spring, Lespedeza cyrtobotrya shows quick germination and rapid growing which can be compared with herbaceous plants using in the hydroseeding. As for Pinus thunbergii, there was little difference in germinatin according to different seeding timing. But Evodia daniellii, Parthenocis년 tricuspidata and Alnus hirsuta seem to need seed treatments to improve the seed germination. 2. Ground cover rate : The most rapid growing plant is Lespedeza cyrtobotrya and the next is Amorpha fruticosa. The other plants show extreamly low ground cover rate, so they seem to be surpressed by herbaceous plants which will be mixed for erosion control. 3. Plant height : On 8 weeks later after seeding, the Lespedeza cyrtobotrya which was seeded in June recorded 17.1cm plant height. It will be enouch height to compete with herbaceous plants. As the Parthenocissus tricuspjdata seeded in May shows 27cm plant length, it can be used more frequently on seeding works if the seed germination were improved. In sum, seeding is best carried out in May. When deciding seeding rate for the purpose of hydroseeding, it will be necessary to adjust the woody plants germination percentage according to seeding timing.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.03a
• /
• pp.3-46
• /
• 1999

A new method called SRICOS is proposed to predict the scour depth z versus time t around a cylindrical bridge pier of diameter D founded in clay. The steps involved are ; 1. taking samples at the bridge pier site, 2. testing them in an Erosion Function Apparatus called the EFA to obtain the scour rate z versus the hydraulic shear stress applied $\tau$, 3. predicting the maximum shear stress r max which will be induced around the pier by the water flowing at ν Ο before the scour hole starts to develop, 4. using the measured z versus r curve to obtain the initial scour rate zi corresponding to r max , 5. predicting the maximum depth of scour zmax for the pier, 6. using zi and zmarx to develop the hyperbolic function describing the scour depth z versus time t curve, and 7. reading the z vs. t curve at a time corresponding to the duration of the flood to find the scour depth which will develop around the pier. A new apparatus is developed to measure the z vs t curve of step 2, a series of advanced numerical simulations are performed to develop an equation for the $\tau$ max value of step 3, and a series of flume tests are performed to develop an equation for the zmax value of step 5. The method is evaluated by comparing predictions and measurements in 42 flume experiments.

• Corrosion Science and Technology
• /
• v.13 no.2
• /
• pp.62-69
• /
• 2014

A huge number of carbon steel piping components installed in the secondary system of nuclear power plants are exposed to aging mechanisms such as FAC (Flow-Accelerated Corrosion), Cavitation, Flashing, and LDIE (Liquid Droplet Impingement Erosion). Those aging mechanisms can lead to thinning of the piping components. To manage the wall thinning degradation, most of utilities in the world predict the wall thinning rate based on the computational program such as CHECWORKS, COMSY, and BRT-CICERO, evaluate the UT (Ultrasonic Test) data, and determine next inspection timing, repair or replacement, if needed. There are several evaluation methods, such as band, blanket, and strip methods, commonly used for determining the wear of piping components from single UT inspection data. It has been identified that those single UT evaluation methods not only do not consider the manufacturing features of pipes, but also may exclude the data of the most thinned point when determining the representative wear rate of piping components. This paper describes a newly developed single UT evaluation method, E-Cross method, for solving above problems and introduces application examples for several pipes and elbows. It was identified that the E-Cross method using the length and width of UT data excluded the most thinned points appropriate as the single UT evaluation method for thinned piping components.

• Journal of Microbiology and Biotechnology
• /
• v.19 no.9
• /
• pp.1028-1033
• /
• 2009

In this study, the dynamics of living cells (LC) and dead cells (DC) in a laboratory-scale biofilm membrane bioreactor for waste gas treatment was examined. Toluene was used as a model pollutant. The bacterial cells were enumerated as fluoromicroscopic counts during a 140 operating day period using BacLight nucleic acid staining in combination with epifluorescence and confocal laser scanning microscopy (CSLM). Overall, five different phases could be distinguished during the biofilm development: (A) cell attachment, (B) pollutant limitation, (C) biofilm establishment and colonization, (D) colonized biofilm, and (E) biofilm erosion. The bioreactor was operated under different conditions by applying different pollutant concentrations. An optimum toluene removal of 89% was observed at a loading rate of 14.4 kg $m^{-3}d^{-1}$. A direct correlation between the biodegradation rate of the reactor and the dynamics of biofilm development could be demonstrated. This study shows the first description of biofilm development during gaseous toluene degradation in MBR.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.2
• /
• pp.13-21
• /
• 2002

A new method called S-SRICOS is proposed to predict the local scour depth around bridge piers. The S-SRICOS method is a simplified version of the SRICOS method which was developed to predict the scour depth versus time curve around bridge piers. The SRICOS method which considers the time effect based on the soil properties and the hydraulic parameters can handle a multi-flood hydrograph and multi-layer soil systems with the SRICOS program. An attempt was made to simplify the method to the point where only hand calculations would be required. The concept of the equivalent time was developed leer this purpose. The S-SROICOS method requires only 4 parameters such as pier width, design bridge life, design velocity corresponding to the design bridge life, and initial scour rate of the soil. The S-SRICOS method was verified against 55 cases of the scour depth results using the SRICOS method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.370-373
• /
• 2003

As the integrated circuit device shrinks to the smaller dimension, the chemical mechanical polishing (CMP) process was required for the global planarization of inter-metal dielectric(IMD) layer with free-defect. However, as the IMD layer gets thinner, micro-scratches are becoming as major defects. Chemical-Mechanical Planarization(CMP) of conductors is a key process in Damascene patterning of advanced interconnect structure. The effect of alternative commerical slurries pads, and post-CMP cleaning alternatives are discuess, with removal rate, scratch dentisty, surface roughness, dishing, erosion and particulate density used as performance metrics. Electroplated copper depostion is a mature process from a historical point of view, but a very young process from a CMP persperspective. While copper electrodepostion has been used and stuidied for dacades, its application to Cu damascene wafer processing is only now ganing complete accptance in the semiconductor industry. The polishing mechanism of Cu CMP process has been reported as the repeated process of passive layer formation by oxidizer and abrasion action by slurry abrasives. however it is important to understand the effect of oxidizer on copper pasivation layer in order to obtain higher removal rate and non-uniformity during Cu-CMP process. In this paper, we investigated the effects of oxidizer on Cu-CMP process regarding the additional volume of oxidizer.

• Korean Journal of Veterinary Service
• /
• v.13 no.2
• /
• pp.111-129
• /
• 1990

Based on the gross lesion, a survey of ulcer prevalence was carried out on pigs (3,161 heads) at a slaughterhouse in seoul from April to December in 1989. The pigs stomachs were observed anatomically and classified, according to the presence or absence of foreign bodies. Ulcer prevalence is usually classified according to size of pig farm, ages, and supplied month. The results in the studies were as follows, 1. Fundus followed the highest rate with 28.2%, esophagus with 24.5％ each of cardiac and pyloric part with 7.8% and 4.1％ in cases of gastric mucosa pathological studies examed total 3,161. In the acute ulcer prevalence, fundus follwed with 5.4%, esophagus with 2.6%, each of cardiac and pyloric part with 0.8% and 0.3%. When prevalent frequencies of fundus are compared with cardiac and pyloric part, they have meaning.(P <0.05). 2. In the survey pig of total 3,161, pathological changes of epithelium tissue foliowed 44.0%, erosion(11.5%), chronic ulcer(14.8%), acute ulcer(1.6%), scar formation (1.7%) and perforation (0.9%). 3. In general monthly prevalence rates of gastric lesion are higher in spring and fall than in summer. 4. In the size of pig farms, ulcer showed higher rate at professional farms than raising on the side. 5. When there are more fluid condition in stomach and they are old, the ulcer appeared for more. 6. Foreign bodies in stomach were sand, hairballs, and intestinal worms were detected (1%).

• Korean Journal of Social Welfare
• /
• v.42
• /
• pp.169-198
• /
• 2000

This paper attempts to analyze the early retirement in the OECD countries and discuss implication of that in the old age policy in Korea. The increase of the early retirement in the almost all OECD countries is a common fact. Especially the rate of early retirement rapidly increased in the 1980s, mostly reflecting the high rate of unemployment and states' policies to reduce it. However, it varies across countries: the unemployment compensation pathway in France, the mixture of social assistance and private insurance in England, VUT in Netherland, the privatization of the early retirement in the U. S., and partial retirement and labor market policy in Sweden. The early retirement in the advanced countries contributes to de-institutionalization and de-standardization in life course model. It resulted in the erosion of the ordinary conception that the retirement was the beginning of the old age. And the last phase of life course became blurred. With respect to the problem of the early retirement, there is a big difference between Korea and the OECD countries. Above all, the retirement age is 55 years in many companies and the public pension is not universalized in Korea. Accordingly the policy for income security of the old age in Korea should be connected with social security policy such as the gradual extension of the retirement age and the expansion of the public pension and labor market policy such as job training for the old age, transformation of the seniority wage system etc.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.20-23
• /
• 2004

As the integrated circuit device shrinks to the smaller dimension, the chemical mechanical polishing(CMP) process was required for the global planarization of inter-metal dielectric(IMD) layer with free-defect. However, as the IMD layer gets thinner, micro-scratches are becoming as major defects. Chemical-Mechanical polishing(CMP) of conductors is a key process in Damascene patterning of advanced interconnect structure. The effect of alternative commercial slurries pads, and post-CMP cleaning alternatives are discuss, with removal rate, scratch dentisty, surface roughness, dishing, erosion and particulate density used as performance metrics. Electroplated copper deposition is a mature process from a historical point of view, but a very young process from a CMP perspective. While copper electro deposition has been used and studied for decades, its application to Cu damascene wafer processing is only now gaining complete acceptance in the semiconductor industry. The polishing mechanism of Cu-CMP process has been reported as the repeated process of passive layer formation by oxidizer and abrasion action by slurry abrasives. however it is important to understand the effect of oxidizer on copper passivation layer in order to obtain higher removal rate and non-uniformity during Cu-CMP process. In this paper, we investigated the effects of oxidizer on Cu-CMP process regarding the additional volume of oxidizer.