• 한국수자원학회논문집
• /
• 제41권10호
• /
• pp.983-993
• /
• 2008

근래에 이상기상과 지구 온난화로 인한 해수면 상승과 해사채취, 난개발에 의해 국내외 연안역에 여러 형태의 침식피해가 발생되고 있다. 이에 대한 침식방지 및 보호대책 공법이 적용되고 있으나 큰 실효를 거두지 못하고 있다. 연안보호 구조물로 PC 콘크리트 호안블럭이 국내외 연안에 시공되고 있으나 대부분의 기존 구조물들은 사람의 접근성이 어려운 구조물로 시공되어 있어 친수성이 부족한 실정이다. 본 연구에서는 이런 점들을 보완하여 사람들의 접근성이 좋으면서 연안침식 방지 보호 능력이 우수한 친수성 호안공을 개발하고자 한다. 개발한 호안공의 성능과 기능의 확보를 위해 모형실험이 반사율, 파량, 월파고에 대해 수행되었다. 그 결과는 일반 계단형 보다 훨씬 좋은 결과를 나타냈다. 또한 호안공의 실용화를 위해 현장실험은 노출부 일단면의 식생실험과 해안역의 침식구간에 시공실험을 실시하였다. 후자의 경우는 실험구간에서 많은 양의 모래가 짧은 시간에 퇴적되어 연안침식 방지 및 보호용 친수 호안공으로서의 현장 적용성을 확인하였다.

• Water Engineering Research
• /
• 제1권4호
• /
• pp.259-266
• /
• 2000

Scour hole is formed due to the high shear stress of the jet flow at the outlet of a hydraulic structure and vortex erosion occurs in the scour hole. It is important to determine the amount of vortex erosion occurs in the scour hole. It is important to determine the amount of vortex erosion for the design of bed protection. If the vortex erosion continues and reaches to the hydraulic structure, it causes the deformation of the structure itself. To obtain the amount of the vortex erosion, it is necessary to determine the shear velocity of the line vortex in the scour hole was derived by the theory of energy conservation and found to be related to the upstream overflow velocity. The amount of vortex erosion from the scour hole was obtained using entrainment equation for given value of shear velocity. For a design purpose, if the flow velocity at the end of an apron and the properties of bed material are given, the amount of vortex erosion was obtained.

• Geomechanics and Engineering
• /
• 제17권5호
• /
• pp.421-427
• /
• 2019

Coastal erosion is becoming a significant problem in Greece, Bangladesh, and globally. For the prevention and minimization of damage from coastal erosion, combinations of various structures have been used conventionally. However, most of these methods are expensive. Therefore, creating artificial beachrock using local ureolytic bacteria and the MICP (Microbially Induced Carbonate Precipitation) method can be an alternative for coastal erosion protection, as it is a sustainable and eco-friendly biological ground improvement technique. Most research on MICP has been confined to land ureolytic bacteria and limited attention has been paid to coastal ureolytic bacteria for the measurement of urease activity. Subsequently, their various environmental effects have not been investigated. Therefore, for the successful application of MICP to coastal erosion protection, the type of bacteria, bacterial cell concentration, reaction temperature, cell culture duration, carbonate precipitation trend, pH of the media that controls the activity of the urease enzyme, etc., are evaluated. In this study, the effects of temperature, pH, and culture duration, as well as the trend in carbonate precipitation of coastal ureolytic bacteria isolated from two coastal regions in Greece and Bangladesh, were evaluated. The results showed that urease activity of coastal ureolytic bacteria species relies on some environmental parameters that are very important for successful sand solidification. In future, we aim to apply these findings towards the creation of artificial beachrock in combination with a geotextile tube for coastal erosion protection in Mediterranean countries, Bangladesh, and globally, for bio-mediated soil improvement.

• Journal of Advanced Marine Engineering and Technology
• /
• 제17권3호
• /
• pp.42-49
• /
• 1993

Recently, because the lubricating oil showed a tendency to be emulsified and oxidized by high speed, high output and the extension of maintenance & conservation of marine engine, the cavitation erosion-corrosion at such an environment became a big problem on effective performance of engine. Therefore, there was a need to study the behavior and protection of erosion-corrosion damage, and then applied inhibitor to a protective method of cavitation erosion- corrosion damage. At this time, test environments were marine lubricating oil & various emulsified oil that mixed distilled water and sea water etc., and also used 20KHz, 24.mu.m piezoelectric vibrator as an experimental apparatus of cavitation erosion. With this apparatus, we investigated an influence of the emulsified oil on characteristics of erosion-corrosion and protection for erosion-corrosion by inhibitor at slide bearing metals.

• Journal of Advanced Marine Engineering and Technology
• /
• 제20권2호
• /
• pp.92-92
• /
• 1996

Recently, with the rapid development in the oceanic systems such as the oceanic structures and vessel, there occurs much interest in the impingement erosion-corrosion. In this paper, Cu-metal was tested by using of erosion apparatus with water-jet type and was investigated under the behaviour of impingement erosion-corrosion according to various environmental conditions, and the properties of Cu-metal were evaluated through the measurement by weight loss, weight loss rate, protective efficiency. The results were compared with those obtained using Cu-metal applied to cathodic protection and Cu-alloys added to Zn or Al-metal. As a basis of those results, the best protective efficiencies could be taken as using cathodic protection method and Cu-alloy with Al & Zn material addings, and will be suggested as the fundamental data of the anti-impingement erosion-corrosion on Cu-metal of impeller material for oceanic centrifugal pump.

• Journal of Advanced Marine Engineering and Technology
• /
• 제20권2호
• /
• pp.24-31
• /
• 1996

Recently, with the rapid development in the oceanic systems such as the oceanic structures and vessel, there occurs much interest in the impingement erosion-corrosion. In this paper, Cu-metal was tested by using of erosion apparatus with water-jet type and was investigated under the behaviour of impingement erosion-corrosion according to various environmental conditions, and the properties of Cu-metal were evaluated through the measurement by weight loss, weight loss rate, protective efficiency. The results were compared with those obtained using Cu-metal applied to cathodic protection and Cu-alloys added to Zn or Al-metal. As a basis of those results, the best protective efficiencies could be taken as using cathodic protection method and Cu-alloy with Al & Zn material addings, and will be suggested as the fundamental data of the anti-impingement erosion-corrosion on Cu-metal of impeller material for oceanic centrifugal pump.

• Tribology and Lubricants
• /
• 제11권1호
• /
• pp.58-65
• /
• 1995

When marine lubricating oil began to be emulsified and oxidized through ingressive water that have leaked from cooling pump seal systems, cooler, purifier system and piping system, the cavitation erosion-corrosion in alloy metals of bearings remains to the various troublesome problem at effective engine performance. Therefore, applied the cathodic protection to the control test of cavitation erosion-corrosion, and appointed the marine system oil containing 3% sea water as test environments, with different conductibility. Also, used the piezoelectric vibrator with 20 KHz, 24 $\mu$m as the cavity generation apparatus, and examined the weight loss, potential value, current density etc. in specimens with those condition. According to this testing data, investigated influence of cathodic protection on the control characteristics of cavitation erosion-corrosion, and will serve those as an elementary design data of marine bearing.

• 한국콘텐츠학회논문지
• /
• 제7권9호
• /
• pp.212-219
• /
• 2007

본 연구에서는 자연 친화형의 해안을 보호하고 침식을 방지할 수 있는 해수유통 호안블록을 개발하였다. 개발한 호안블록 구조물은 반사율과 안정성 및 월파량에 대한 기존 구조물과 수리모형 비교실험을 통해 안정성과 우수성을 입증하였다. 또한 이를 현장에 시공하여 구조물서의 현장 적용성과 기능을 검토하기 위해 침식해안의 일부 구간에 본 구조물을 설치하고 해안 표사의 변화를 조사관찰한 결과, 많은 양의 모래가 퇴적되는 것을 확인함으로써 해안침식 방지용 호안 구조물로서의 기능과 적용성을 확보하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제19권2호
• /
• pp.56-66
• /
• 1995

Recently, with theraped advancement in th oceanology such an ocean-going vessel and oceanic structures, there is a need to study the cavitation erosion-corrosion control of pump impeller, the partial element of ocean machinery, for more effective operation. Especially, the cathodic protection (impressed current method & Al-sacrificial anode method) was applied to sea water, and Cu-alloy material mixed Zn & Al was used as a control method of cavitation erosion-corrosion. In this study, used the piezoelectric vibrator with 20KHz, 24.mu.m to cavity generation apparatus, and investigated the weight loss, weight loss rate, electrode potential & current density etc. under this condition. According to test result, thos describes how to indentify an influence of the cathodic protection and Al & Zn addition in material development for the control of cavitation erosion-corrosion, and those will serve as fundamental data on the cavitation erosion-corrosion control of oceanic centrifugal pump.

• 한국농공학회지
• /
• 제40권5호
• /
• pp.52-58
• /
• 1998

The objective of this study was to develop a polymer mortar protection block with high strength and durability using unsaturated polyester resin to complement defects of conventional cement mortar protection block. Physical and mechanical properties of the polymer mortar protection block were also investigated. Low absorptivity, high impact strength, and great bending strength of the polymer mortar protection block was compared with those of the conventional cement protection block. In conclusion, the polymer mortar protection block is excellent and useful as industrial products for erosion control works.