• Journal of Korean Society on Water Environment
• /
• v.28 no.3
• /
• pp.418-425
• /
• 2012

Dam construction in a river can change its hydrological pattern and trap sediments, which results in ecological changes in the downstream. It is a common phenomenon in the downstream of dams to have decreased sediment flow and increased periphyton. Artificial floods and sediment application are suggested as mitigation practices in order to simulate natural process of flood; transporting sediment and sloughing periphyton off. In this study the effects of artificial floods on periphyton were examined by applying sand artificially and discharging water from a dam (Yangyang Dam, Korea). The study area has been suffering from turbidity problems caused by shore erosion of the dam. The accumulation of inorganic sediments and increase of periphyton on the river bottom are the major factors of habitat deterioration in the downstream reaches. Artificial flood and artificial addition of sand was performed in summer and the effects were measured. Piles of applied sands were washed off easily by discharge and it enhanced the periphyton sloughing effect. The removal efficiency of periphyton was 50 ~ 80% within the 2 km reach from the dam. In conclusion artificial floods and sand application can be a good mitigation measure for the habitat rehabilitation after a dam construction in streams.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.472-472
• /
• 2011

The capacitive coupled plasma (CCP) has been extensively used in the semiconductor industry because it has not only good uniformity, but also low electron temperature. But CCP source has some problems, such as difficulty in varying the ion bombardment energy separately, low plasma density, and high processing pressure, etc. In this reason, dual frequency CCP has been investigated with a separate substrate biasing to control the plasma parameters and to obtain high etch rate with high etch selectivity. Especially, in this study, we studied on the etching of $SiO_2$ by using the pulse-time modulation in the dual-frequency CCP source composed of 60 MHz/ 2 MHz rf power. By using the combination of high /low rf powers, the differences in the gas dissociation, plasma density, and etch characteristics were investigated. Also, as the size of the semiconductor device is decreased to nano-scale, the etching of contact hole which has nano-scale higher aspect ratio is required. For the nano-scale contact hole etching by using continuous plasma, several etch problems such as bowing, sidewall taper, twist, mask faceting, erosion, distortions etc. occurs. To resolve these problems, etching in low process pressure, more sidewall passivation by using fluorocarbon-based plasma with high carbon ratio, low temperature processing, charge effect breaking, power modulation are needed. Therefore, in this study, to resolve these problems, we used the pulse-time modulated dual-frequency CCP system. Pulse plasma is generated by periodical turning the RF power On and Off state. We measured the etch rate, etch selectivity and etch profile by using a step profilometer and SEM. Also the X-ray photoelectron spectroscopic analysis on the surfaces etched by different duty ratio conditions correlate with the results above.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.6
• /
• pp.155-165
• /
• 2013

Recently, geotextile tube method can be widely applied to the river, costal and marine in the construction field, such as embankment, groin, breakwater, dyke structures and so on, in advanced countries of the world. And that has been constructed at the temporary road for incheon, ilsan-bridge construction and coast erosion protection in republic of korea. Geotextile tube is a tube shaped geotextile product and hydraulic pumping filled with dredged soils. In this paper, the numerical analysis was performed to investigate the behavior of geotextile tube with various properties of material character, shape condition, construction pressure and so on. Also, the field test was conducted in order to identify the construction ability of Samangum waterproof embankment using geotextile tube. According to the applied of field test, geotextile tube was 65 m long and 4.0 m diameter. Also, the permeability coefficient and ultimate tensile strength of geotextile tube is $1.6{\times}10^{-1}$ cm/sec and 205.26 kN/m, respectively. As a result of filed test, when filled, geotextile tube does not attain the same as its unfilled theoretical diameter, but may reach approximately of 55 percent of the theoretical diameter. At the time, geotextile tubes were 12.56 m in circumference and filled to a height of about 2.2 m. This paper presents case study on field application and behavior analysis of the saemangum waterproof embankment donggin 1 division construction using geotextile tube.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.1
• /
• pp.1-13
• /
• 2001

An absolutely passive fit at the interface with the superstructure and the abutment cylinders is need for implant longevity. In this study, a method of cast framework correction using spark erosion technology was evaluated. Electric discharge machining(EDM) is a process that uses electrical discharges, or sparks, to machine metal, The surface being machined is bombared with high-intensity electrical energy pulses that gradually melt away the stock until the desired configuration is obtained. Master model was fabricated by using metal block impression analogue, which fired 5 Branemark squared impression coping in an arc shaped metal block. Then framework using 4mm standard gold cylinder and type IV gold alloy was fabricated. In order to measure the fit of the framework we used both contact and noncontact coordinate measurement machine and data was processed by computer program. After superimposition of gold framework and master model numeric image data the distances between gold cylinder bearing surfaces and abutment replica bearing surfaces, and the angle deviations between gold cylinder and abutment replica centroid points were calculated. The results were as follows 1 The total mean distance (p<0.01) and standard deviation (p<0.001) between the gold cylinders and abutment bearing surfaces were significantly decreased after EDM 2. The total mean of maximum distances was significantly decreased after EDM (p<0.05). 3. After EDM, the mean angle deviation between centroid points was decreased.

• Journal of the Korean Geographical Society
• /
• v.39 no.6 s.105
• /
• pp.833-844
• /
• 2004

In Chugaryeong rift valley, lava plateau formation by the fissure eruption had vanished original landforms and effected on drainage derangement and revision. 4 rivers including Namdae-cheon, Bukhan-gang, Imjin-gang and Hantan-gang watersheds have shared Cheolwon-Pyeonggang lava plateau, that is, ownerless watershed. Main agency of the dividing process are central-eruption volcanic peaks such as Orisan(453m) and 680 Peak. Especially, Orisan has played the role of divide point for 4 watersheds. In the lower-relief plateau zone, complex drainage system have caused continually river capture between neighboring watersheds. In more elevated range slope, river capture have proceeded to headward erosion. Hydrogeomorphologically, lava-filled valley has initiated decrease of the original size of flood plain, maybe, causing higher capability of inundation by heavy rains, and then more active dissection of lava plateau layer.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.19 no.3
• /
• pp.239-245
• /
• 2003

The occurrence and pattern of tooth wear are related to cultural, dietary, occupational, and geographic factors, Excessive occlusal wear can result in pulpal exposure, occlusal disharmony, functional inability. Surface loss can be differentiated into 3 general causal categories: i) mechanical loss, which includes attrition, ii) abrasion chemical loss including erosion, and finally iii) a proposed biomechanical category described as abfraction. Considering that mechanical wear is frequently asymptomatic, patients may have parafunctional habit. Structured clinical decision analysis in fixed prosthodontics, as other branches of dentistry do, allows the practitioner to consider the patient's problems more thoroughly based on the clinical data and extenuation factors. This discipline of decision making is intended to complement the experience level and educational background of the clinician in assisting the patient through the decision process. Additionally, CDA helps the clinician define not only the pre-existing condition of the patient prior to irreversible therapy, but also better treatment strategies for the patient over an extended period. The systematic nature of decision analysis stimulates the dentists to pay further attention to those factors, which is germane to the overall complexity of the case, and exclude factors, which have little influence on its final outcome. Further implementation of computerized databases, procedural outcome probabilities based on clinical and laboratory studies and the clinical experience of those who use it, may provide quite a promising future in the field of structured and formalized clinical decision analysis.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.12 no.3
• /
• pp.21-32
• /
• 2009

Coastal sand dune area is the important ecosystem as an ecotone which located between coastal area and terrestrial area. Moreover, it is very complicate landscape that have geomorphological interaction between erosion and accumulation of sand. Therefore, it is necessary to understand the sand dune ecosystem in view point of landscape scale including background landscape affecting origin of sand dune. Landscape ecological approach in the complicate ecosystem already started in developed countries, and it is applied to land management and biodiversity conservation strategies even in national scale. In this paper, landscape ecological analysis using landscape pattern analysis was carried out on 7 study areas (Yellow Sea : Hakampo and Doksan, South Sea : Namyeol and Balpo, East Sea : Hosan, Hupo and Goraebul) in Korean coastal sand dune ecosystem. Landscape elements were composed by 9 elements in these study areas. Major background landscape elements was the forest land and agricultural field. Namyeol (S06) has larger patch landscape compare to other areas. In patch shape indices, Hupo (E10) shows more complicate patch shapes. The high landscape heterogeneity showed in the Doksan sand dune area and that of Hosan. It shows that these areas were composed by various patch types. However, using landscape indices have to use very carefully because several variables have influence to the result such as scale and spatial pattern of study areas. Although landscape analysis through landscape indices shows sometimes difficult to explain the ecosystem, landscape scale approach on ecosystem assessment still useful to interpret in ecological process in large range of habitat.

• Journal of Veterinary Science
• /
• v.21 no.1
• /
• pp.15.1-15.11
• /
• 2020

The present study evaluated the anti-inflammatory effect of horse oil in 2, 4-dinitrochlorobenzene (DNCB)-treated BALB/c mice. After the application of DNCB, the mice showed atopic dermatitis symptoms, including severe erythema, hemorrhage, and erosion, whereas those symptoms were alleviated by treatment with horse oil. To explain the anti-dermatitis effect of horse oil, the gene expression levels in the healing process in dorsal skin were observed using a cDNA microarray. The cDNA microarray analysis revealed that the expression levels of 30 genes related to the inflammation, including Ccr1, Ccr2, Ccl20, Anxa1, and Hc genes, were up-regulated (higher than 2.0-fold) in the DNCB group compared to the levels in the control group, whereas the levels were restored to the control level in the DNCB + horse oil-treated group. In contrast, the gene expression levels of 28 genes related to inflammation, including chemokine genes Ccl5, Ccl7, Ccl8, Cxcl10, and Cxcl13 genes, were down-regulated (lower than 0.5-fold) in the DNCB group compared to the levels in the control group, whereas the levels were restored to the control level in the DNCB + horse oil-treated group. Overall, the results show that horse oil restores the expression levels of genes related to inflammation that were perturbed by DNCB treatment.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.3
• /
• pp.339-349
• /
• 2017

This paper proposes a four-stage algorithm for detecting lanes on a driving car. In the first stage, it extracts region of interests in an image. In the second stage, it employs a median filter to remove noise. In the third stage, a binary algorithm is used to classify two classes of backgrond and foreground of an input image. Finally, an image erosion algorithm is utilized to obtain clear lanes by removing noises and edges remained after the binary process. However, the proposed lane detection algorithm requires high computational time. To address this issue, this paper presents a parallel implementation of a real-time line detection algorithm on a multi-core architecture. In addition, we implement and simulate 8 different processing element (PE) architectures to select an optimal PE architecture for the target application. Experimental results indicate that 40×40 PE architecture show the best performance, energy efficiency and area efficiency.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.35 no.6
• /
• pp.164-172
• /
• 2023

The grain size distribution of sand provides crucial information for understanding coastal erosion and sediment deposition. The commonly used sieve analysis for grain size distribution analysis has limitations such as time-consuming processes and the inability to obtain information about individual particle shapes and colors. In this study, we propose a grain size distribution analysis method using smartphone digital images, which is simpler and more efficient than the sieve analysis method. During the image analysis process, we effectively detect particles from relatively low-resolution smartphone digital images by extracting particle boundaries through image gradient calculation. Using samples collected from four beaches in Gyeongsangbuk-do, we compare and validate the proposed boundary extraction image analysis method with the analysis method that does not extract boundaries, against sieve analysis results. The proposed method shows an average error rate of 8.21% at D₅₀, exhibiting a 65% lower error compared to the method without boundary extraction. Therefore, grain size distribution analysis using smartphone digital images is convenient, efficient, and demonstrated accuracy comparable to sieve analysis.