• 한국농공학회논문집
• /
• 제48권6호
• /
• pp.45-56
• /
• 2006

The finite element method is a practical tool to compute the response of the irregularly layered soil deposit to the base-rock motions. The method is useful not only in estimating the interaction between the structure and the surrounding soil as a whole and the local behavior of the contacting area in detail, but also in predicting the resulting behavior of the superstructure affected by such soil-structure interactions. However, the computation of finite element analysis is marched in the time domain (TD), while the site response analysis has been carried out mostly in the frequency domain (FD) with equivalent linear analysis. This study is intended to compare the results of the TD and FD analysis with focus on the peak response accelerations and the predominant frequencies, and thus to evaluate the applicability and the validity of the finite element analysis in the site response analysis. The comparison shows that one can obtain the results very close to that of FD analysis, from the finite element analysis by including sufficiently large width of foundation in the model and further by applying partial mode superposition. The finite element analysis turned out to be well agreeing with FD analysis in their computed results of the peak acceleration and the acceleration response spectra, especially at the surface layer.

• 대한방사선기술학회지:방사선기술과학
• /
• 제41권2호
• /
• pp.135-140
• /
• 2018

In this study, the dose of antimony shielding sheet was measured and the shielding rates according to the distance between the radioisotopes and the detector was analyzed according to the type of $^{99m}Tc$, $^{18}F$, $^{201}Tl$, $^{131}I$, $^{123}I$ using the antimony shielding sheet. The detector was used with an inspector. Six sheets of 0.25 mmPb were prepared with 20 cm width and length. Measurement results using $^{99m}Tc$, $^{201}Tl$, and $^{123}I$ showed that as the thickness of the sheet became thicker, the farther the distance from the source to the sheet was, the smaller the transmitted dose amount was measured. It was analyzed that a thickness of 1.50 mm or more was required to obtain a shielding rates of 90% or more. In the experiments of $^{18}F$ and $^{131}I$, the dose value was highest when 0.25 mm sheet was used, and the shielding rates was negative, unlike the results of other radioisotopes. Since $^{201}Tl$ are used when using antimony sheet and $^{18}F$ and $^{131}I$ have no shielding effect, it is thought that it is effective to reduce dose by repeating training and simulation training so that work can be done in a short time.

• Structural Engineering and Mechanics
• /
• 제68권4호
• /
• pp.423-442
• /
• 2018

In this paper, masonry infilled reinforced concrete (RC) frames are analyzed through a probabilistic approach. A macro-modeling technique, based on an equivalent diagonal pin-jointed strut, has been resorted to for modelling the stiffening contribution of the masonry panels. Since it is quite difficult to decide which mechanical characteristics to assume for the diagonal struts in such simplified model, the strut width is here considered as a random variable, whose stochastic characterization stems from a wide set of empirical expressions proposed in the literature. The stochastic analysis of the masonry infilled RC frame is conducted via the Probabilistic Transformation Method by employing a set of space transformation laws of random vectors to determine the probability density function (PDF) of the system response in a direct manner. The knowledge of the PDF of a set of response indicators, including displacements, bending moments, shear forces, interstory drifts, opens an interesting discussion about the influence of the uncertainty of the masonry infills and the resulting implications in a design process.

• Structural Engineering and Mechanics
• /
• 제47권2호
• /
• pp.185-207
• /
• 2013

In flexural strength design of normal-strength concrete (NSC) beams, it is commonly accepted that the distribution of concrete stress within the compression zone can be reasonably represented by an equivalent rectangular stress block. The stress block it governed by two parameters, which are normally denoted by ${\alpha}$ and ${\beta}$ to stipulate the width and depth of the stress block. Currently in most of the reinforced concrete (RC) design codes, ${\alpha}$ and ${\beta}$ are usually taken as 0.85 and 0.80 respectively for NSC. Nonetheless, in an experimental study conducted earlier by the authors on NSC columns, it was found that ${\alpha}$ increases significantly with strain gradient, which means that larger concrete stress can be developed in flexure. Consequently, less tension steel will be required for a given design flexural strength, which improves the ductility performance. In this study, the authors' previously proposed strain-gradient-dependent concrete stress block will be adopted to produce a series of design charts showing the maximum design limits of flexural strength and ductility of singly-and doubly-NSC beams. Through the design charts, it can be verified that the consideration of strain gradient effect can improve significantly the flexural strength and ductility design limits of NSC beams.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.1015-1019
• /
• 2001

This paper presents a novel three-phase current-fed Pulse Width Modulation converter with switched capacitor type resonant DC link commutation circuit operating PWM pattern strategy under a design consideration of low-pass filter, which can operate on the basis of the principle of zero current soft switching commutation. In the first place, the steady state operating principle of this converter with a new resonant DC link snubber circuit is described in connection with the equivalent operation circuit, together with the practical design procedure of the switched-capacitor type resonant DC link circuit is discussed from a theoretical viewpoint on the basis of a design example for high-power applications. The actively delayed time correction method to compensate distorted currents due to a relatively long resonant commutation time is newly implemented in the open loop control scheme so as to acquire the new optimum PWM pattern. Finally, the experiment of set-up in laboratory system of this converter is concretely demonstrated herein to confirm a zero current soft-switching commutation of this converter. The comparative evaluations between current-fed hard switching PWM and soft-switching PWM converters are carried out from a viewpoint of their PWM converter characteristics.

• 대한조선학회논문집
• /
• 제39권1호
• /
• pp.38-48
• /
• 2002

파랑집중 이론에 기초하여 모형시험수조에서 다방향 극한파를 생성하는 연구를 수행하였다. 파랑의 집중도에 대한 파향 범위, 주파수 폭, 중심 주파수 등의 영향을 고찰하였다. 등파고와 등기 울기 스펙트럼 모델에 의한 결과를 서로 비교하였으며, Boussinesq 방정식과 유한요소법에 기초한 수치해와 이론해를 또한 서로 비교하였다. 효율적인 파랑집중을 위해서는 파향과 주파수 모두를 효과적으로 제어하는 것이 필수적이다. 파랑집중도는 중심주파수 보다는 주파수 폭에 좌우되며, 동일한 조건하에서 두 스펙트럼 모델은 동등한 정도의 파랑집중 효율을 나타낸다.

• 천문학회보
• /
• 제41권2호
• /
• pp.43.1-43.1
• /
• 2016

The duration of star formation activity is a key to understanding the formation process of star clusters. Although a number of astronomers have attempted to derive the underlying age spread in photometric diagrams with a variety of stellar evolutionary models, the resultant findings are subject to uncertainties due to intrinsic variability of pre-main sequence (PMS) stars, observational errors, difficulties in reddening correction, and systematic differences in adopted stellar evolutionary models. The distribution of Li abundance for PMS stars in a cluster could, on the other hand, provide an alternative way to estimate the age spread. In this study, a total of 134 PMS stars in NGC 2264 are observed with the high resolution multi-object spectrogragh Hectochelle attached to the 6.5m Multi Mirror Telescope. We have successfully detected Li ${\lambda}6708$ resonance doublet for 86 low-mass PMS stars. The Li abundance of the stars is derived from their equivalent width using a curves of growth method. After correction for non-LTE effects, the underlying age spread of 3 - 4 Myr is inferred from the Li abundance distribution of low-mass PMS stars. We suggest that NGC 2264 formed on a timescale shorter than 5 Myr given the presence of embedded populations.

• 전력전자학회논문지
• /
• 제20권3호
• /
• pp.239-246
• /
• 2015

A novel control method of a three-phase PWM inverter with LC filter is proposed. The transfer function of LC filter is the same as that of second-order low pass filter(LPF), which has a zero damping ratio. A simple method of implementing second-order LPF with damping ratio is to add a resistor in an LC circuit. However, in a real power system, adopting damping resistors is impractical because it results in losses proportional to the square of the current flowing through the resistors. Instead of inserting resistors, the proposed control strategy utilizes the measured capacitor voltages to control the oscillation of LC circuit. The overall transfer function of the proposed method is the same as a second-order LPF, and its damping ratio is controllable via control variables. The current controller can have overshoots caused by LC filter. Improved current controller is implemented by an equivalent second-order of LC filter. A 7.5 kVA PWM converter and a PWM inverter with a 5.5 kW induction motor are set up to verify the proposed control algorithm. Test waveforms are also presented to verify the proposed LC filter control algorithm.

• Journal of Power Electronics
• /
• 제17권1호
• /
• pp.67-75
• /
• 2017

Due to the excessive zero-sequence voltage in dual three-level inverter fed open-end winding induction motor systems, zero-sequence circumfluence which is harmful to switching devices and insulation is then formed when operating in a single DC voltage source supplying mode. Traditionally, it is the mean value instead of instantaneous value of the zero-sequence voltage that is eliminated, through adjusting the durations of the operating vectors. A new strategy is proposed for zero-sequence voltage elimination, which utilizes unified voltage modulation and a decoupled SVPWM strategy to achieve two same-sized equivalent vectors for an angle of $120^{\circ}$, generated by two inverters independently. Both simulation and experimental results have verified its efficiency in the instantaneous value elimination of zero-sequence voltage.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.733-738
• /
• 2006

As the film transistor-liquid crystal display (TFTLCD) panels become larger and provide higher resolution, the propagation delay of row and column lines, the voltage modulation of Vcom, and the response time of liquid crystal affect the display images now more than in the past. It is more important to understand the electrical characteristic of TFT-LCD panels these days. This paper describes the electrical model of a 15-inch XGA ($1024{\times}768$) TFT-LCD panel. The parasitic resistance and capacitance of its panel are obtained by 3D simulation of a sub pixel. The accuracy of these data is verified by the measured values in an actual panel [1]. The developed panel simulation platform, the equivalent circuit of a 15-inch XGA panel, is simulated by HSPICE. The results of simulation are compared with those of experiment, according to changing the width of signal. Especially, the proposed simulation platform for modeling TFTLCD panels can be applied to large size LCD TVs. It can help panel and circuit designers to verify their ideas without making actual panels and circuits.