• 대한기계학회논문집B
• /
• 제24권1호
• /
• pp.132-142
• /
• 2000

The objective of this study is to experimentally investigate the noise propagating characteristics, the noise reduction mechanism and the performance of a slotted tube attached at the exit plane of a circular convergent nozzle. The experiment is performed through the systematic change of the jet pressure ratio and the slot length under the condition of two kinds of open area ratios, 25% and 51%. The open area ratio calculated by the tube length equivalent for the slot length is defined as the ratio of the total slot area to the surface area of a slotted tube. The experimental results for the near and far field sound, the visualization of jet structures and the static pressure distributions in the jet passing through a slotted tube are presented and explained in comparison with those for a simple tube. The propagating characteristics of supersonic jet noises from the slotted tube is closely connected with the slot length rather than the open area ratio, and its propagating pattern is similar to the simple tube. It is shown that the slotted tube has a good performance to suppress the shock-associated noise as well as the turbulent mixing noise in the range of a limited jet pressure and slot dimension. The considerable suppression of the shock‘associated noise is mainly due to the pressure relief caused by the high-speed jets passing through the slots on the tube. Both the strength of shock waves and the interval between them in a jet plume are decreased by the pressure relief. Moreover, the pressure relief is divided into the gradual and the sudden relief depending upon the open area ratio of the slotted tube. Consequently, the shock waves in a jet plume are also changed by the type of pressure relief. The gradual pressure relief caused by the slotted tube with the open area ratio 25% generates the weak oblique shock waves. On the contrary, the weak normal shock waves appear due to the sudden pressure relief caused by the slotted tube with the open area ratio 51%.

• Journal of Biosystems Engineering
• /
• 제20권4호
• /
• pp.333-342
• /
• 1995

The resistance to air flow through fruits and vegetables in bulk was an important consideration in the design of the pressure cooling system. The amount of resistance to air flow through produce in bulk normally depended upon air flow rate, stacking depth, porosity, stacking patterns and shape and site of product. But, there was not enough information relating the effects of those factors on air flow resistance. The objectives of this study were to investigate the effect of stacking depth, stacking patterns, porosity and airflow rate on airflow resistance and to develop a statistical model to predict static pressure drop across the produce bed as a function of air flow rate, stacking depth, bed porosity, and product size. Mandarins and tomatoes were used in the experiment. The airflow rate were in the range of 0.1~1.0 ㎥/s.$m^2$, the porosity were in the range of 0.25~0.45, the depth were in the range of 0.3~0.9m and the equivalent diameters were 5.3cm and 6.3cm for mandarins, and 6.5cm and 8.5cm for tomatoes. Three methods of stacking arrangement were used i.e. cubic, square staggered, and staggered stacking arrangement. The results were summarized as follows. 1. The pressure drops across produce bed increased in proportion to stacking depth and superficial air velocity and decreased in proportion to porosity. 2. The increasing rates of pressure drop according to stacking patterns with the increase of superficial air velocity were different one another. The staggered stacking arrangement produced the highest increasing rate and the cubic stacking arrangement produced the lowest increasing rate. But it could be assumed that the stacking patterns had not influenced greatly on pressure drops if it was of equal porosity. 3. The statistical models to predict the pressure drop across produce bed as a function of superficial air velocity, stacking depth, porosity, and product diameter were developed from these experiments.

• 항공우주시스템공학회지
• /
• 제15권5호
• /
• pp.98-105
• /
• 2021

본 연구에서는 우주발사체용 복합재 산화제탱크의 구조 강건성을 검증하기 위해 수행된 정하중시험 결과를 제시하였다. 먼저, 복합재 산화제탱크 정하중시험에 사용된 시험장비를 소개하고, 복합재 산화제탱크가 만족해야 하는 시험 요구도를 설명하였다. 그리고, 정하중 시험치구, 유압, 제어장비, 데이터획득장비로 구성되는 시험셋업 구성도를 제시하였고, 전단, 등가압축, 굽힘, 조합시험으로 구성된 복합재 산화제탱크 정하중 시험의 하중 프로파일을 제시하였다. 하중 제어의 결과로 시험하중 증가에 따른 각 하중부과기에서 입력하중과 출력하중 사이의 오차와 각 로드셀 A와 b 채널사이의 오차를 제시하여 본 시험의 신뢰성을 확인하였다. 정하중 시험 결과로, 각 시험에서 하중부과기의 하중은 허용 오차 범위 내에서 적절히 잘 제어되었으며, 시험시편도 요구 하중 내에서 파손이나 심각한 구조적 결함을 유발하는 좌굴은 발생하지 않는 것으로 확인되었다.

• 한국지반신소재학회논문집
• /
• 제13권3호
• /
• pp.39-47
• /
• 2014

호남고속철도에 부설된 동일한 궤도노반시스템을 실제 열차하중이 가능한 실대형 가진시험을 통해 성능을 평가하였다. 실험결 과 Odemark 등가깊이 이론에 의한 노반압력과 매우 유사한 것을 확인하였다. 콘크리트궤도에서 정적하중 330 kN을 재하시 노반 상부의 토압은 50 kPa 이내로 발생하였고, 정적하중시험과 반복하중시험 결과는 비교적 큰 차이가 없었다. HSB의 탄성변위는 증속시험 시 관리기준값 1 mm에 비해 약 1/100 수준이며, 노반의 탄성변위량과 비교해볼 때 1/175 정도로 매우 작은 변위가 발생하였다. 가진주파수의 크기에 따라 궤도노반의 동적거동은 가진주파수가 35 Hz이하에서는 모든 측정값이 거의 선형적으로 증가하였으나, 35 Hz이상에서는 윤중, 변위, 지반가속도 등이 감소하였다.

• 한국안전학회지
• /
• 제29권4호
• /
• pp.9-14
• /
• 2014

Self-piercing riveting(SPR) is a mechanical fastening technique which is put pressure on the rivet for joining the sheets. Unlike a spot welding, SPR joining does not make the harmful gas and $CO_2$ and needs less energy consumption. In this study, static and fatigue tests were conducted using tensile-shear specimens with Al-5052 plates for evaluation of fatigue strength of the SPR joints. During SPR joining process for the specimen, using the current sheet thickness and a rivet, the optimal applied punching force was found to be 21 kN. And, the maximum static strength of the specimen produced at the optimal punching force was 3430 N. During the fatigue tests for the specimens, interface failure mode occurred on the top substrate close to the rivet head in the most high-loading range region, but on the bottom substrate close to the rivet tail in the low -loading range region. There was a relationship between applied load amplitude $P_{amp}$ and lifetime of cycle N for the tensile-shear, $P_{amp}=3395.5{\times}N^{-0.078}$. Using the stress-strain curve of the Al-5052 from tensile test, the simulations for fatigue specimens have been carried out using the implicit finite element code ABAQUS. The relation between von-Mises equivalent stress amplitude and number of cycles was found to be ${\sigma}_{eq}=514.7{\times}N^{-0.033}$.

• Journal of Korean Biological Nursing Science
• /
• 제14권4호
• /
• pp.300-307
• /
• 2012

Purpose: The purpose of this research was to develop and prove the effectiveness of structured arm exercise, which was used to reduce Arteriovenous Fistula (AVF) and Arteriovenous graft (AVG) stricture of hemodialysis patients. Methods: Quasi-experimental research design with non-equivalent control group was applied. 26 Subjects were participated in this study. 12 of hemodialysis patients who do not have a normal range of Static Intra Access Pressure Vein (SIAPV) score in the last three months were assigned to the experimental group and 14 patients who have a normal range of SIAPV score in the last three months to the control group. To analyze the collecting data after structured arm exercise, non parametric method with the repeated measures ANOVA by the Friedman test and Wilcoxon Signed Ranks Test for post-hoc test was performed. Results: Unlike the experimental group after three months, the control group's SIAPV data went over the normal range. The experimental AVF group showed a difference in data after month 2 and month 3. - In AVG group, there were clear differences in each month of the test. Conclusion: This study proved that structured arm exercise therapy could be a simple and effective intervention. It is suggested to be actively utilized for hemodialysis patients.

• 한국수소및신에너지학회논문집
• /
• 제29권5호
• /
• pp.538-548
• /
• 2018

The thermo-acoustic instability in the combustion process of a gas turbine is caused by the interaction of the heat release mechanism and the pressure perturbation. These acoustic vibrations cause fatigue failure of the combustor and decrease the combustion efficiency. This study is to develop a segmented dynamic thermo-acoustic model to understand combustion instability of gas turbine. Therefore, this study required a dynamic analysis rather than static analysis, and developed a segmented model that can analyze the performance of the system over time using the Matlab/Simulink. The developed model can confirm the thermo-acoustic combustion instability and exhaust gas concentration in the combustion chamber according to the equivalent ratio change, and confirm the thermo-acoustic combustion instability for the inlet temperature and the load changes. As a result, segmented dynamic thermo-acoustic model has been developed to analyze combustion instability under the operating condition.

• 수산해양교육연구
• /
• 제28권5호
• /
• pp.1470-1477
• /
• 2016

This study has designed and evaluated the safety of watertight damper for Offshore Rigs. The watertight damper is an improved design for conventional DN 350 butterfly valve. Numerical analysis has been performed to investigate the safety factor and seat leakage of the designed 3-type disk dampers. The structure analysis results present the deformations, the equivalent stresses and the safety factor. It was confirmed that the designed disk, rib-disk and streamlined disk of watertight damper are safe enough in maximum operating pressure of 0.98MPa. The results show that the disk damper had the smallest maximum deformations and stress among 3-type disk dampers and the safety factor was 4.3. Therefore it is confirmed that the disk damper has the most excellent strength. Also linear static structural analysis was individually conducted for disk and body. The results show that the maximum disk deformation was larger than the body deformation, Therefore the disk damper is causes no seat leakage.

• 한국산업융합학회 논문집
• /
• 제26권4_2호
• /
• pp.649-656
• /
• 2023

Recently, global warming has become severe, and regulation is established for carbon savings each field. its regulation is applied to various fields using IC engine such as automobile, ship, agricultural machine. Therefore engine block applied Common Rail Direct Injection(CRDI) technology, that carry out thermal-structure analysis to examine design. The thermal load about 900℃ by explosion was applied in cylinder. And pressure about 9 MPa(90 Bar) was applied to structure analysis. As a result, it was the highest at 185.99℃ at the top of cylinder. Static-structure analysis applied thermal load, that was shown maximum equivalent stress at 142.59 Mpa and Maximum principal stress 145.03 MPa, Minimum principal stress -149 MPa. When compare analysis results to material property, it design is safety structurally.

• 한국지반공학회논문집
• /
• 제20권2호
• /
• pp.15-26
• /
• 2004

반복삼축시험에 의한 반복하중 후 강도 및 강성의 예측법을 이용하여, 세립토에 대해서 직접단순 전단시험에서도 그 방법의 사용 가능성을 확인하여 보았다. 사용한 흙은 실트질 점토, 소성 실트와 비소성 실트이다. 반복삼축시험을 통해서 얻은 강도 및 강성 예측법을 직접단순 전단시험에 맞게 수정하여 시험 결과와 비교하였다. 특히, 세립토의 소성지수와 초기전단응력(ISSS)의 영향이 강조되었다. 연구결과는 (i) 세립토의 액상화강도비는 소성지수의 감소와 초기전단응력의 증가에 따라 감소한다. (ii)등가강성과 전단변형률의 관계에 미치는 소성지수와 초기전단응력의 영향은 그리 크지 않다. (iii) 정규화한 과잉간극수압의 증가에 따른 강도비의 저하는 세립토의 소성지수가 증가할수록 느리다. (iv) 활성도가 큰 소성실트의 강성은 과잉간극 수압의 증가에 따라 급속히 감소한다. (v) 반복삼축시험 결과를 이용한 반복하중후 강도 및 강성의 예측법을 이용하여 직접단순 전단시험 결과에 수정한 방법은 시험결과와 잘 어울리는 것으로 나타났다.