• Structural Engineering and Mechanics
• /
• 제39권1호
• /
• pp.1-20
• /
• 2011

This study investigates the feasibility of detecting structural damage using the HHT method. A damage detection index, the ratio of bandwidth (RB) is proposed. This index is highly correlated or approximately equal to the change of equivalent damping ratio for an intact structure incurring damage from strong ground motions. Based on an analysis of shaking table test data from benchmark models subjected to adjusted Kobe and El Centro earthquakes, the damage detection index is evaluated using the Hilbert-Huang Transform (HHT) and the Fast Fourier Transform (FFT) methods, respectively. Results indicate that, when the response of the structure is in the elastic region, the RB value only slightly changes in both the HHT and the FFT spectra. Additionally, RB values estimated from the HHT spectra vs. the PGA values change incrementally when the structure response is nonlinear i.e., member yielding occurs, but not in the RB curve from the FFT spectra. Moreover, the RB value of the top floor changes more than those from the other floors. Furthermore, structural damage is detected only when using the acceleration response data from the top floor. Therefore, the ratio of bandwidth RB estimated from the smoothed HHT spectra is an effective and sensitive damage index for detecting structural damage. Results of this study also demonstrate that the HHT is a powerful method in analyzing the nonlinear responses of steel structures to strong ground motions.

• 한국안전학회지
• /
• 제8권1호
• /
• pp.80-87
• /
• 1993

본 논문은 에너지 분산 장치의 일종인 점탄성 감쇠기를 설치한 건물의 거동에 관한 실험 및 해석적 연구를 다루고자 한다. 지진 모형 실험 장치를 이용하여 감쇠기를 설치한 건물의 구조응답을 구하고. 이를 감쇠기를 설치하지 않은 건물에 대하여 행해진 비탄성 해석 결과와 비교한다. 결론적으로 말하면. 점탄성 감쇠기는 강지진 하중에 의하여 건물에 발생한 과도한 진동을 감소시키는데 효과적이다 일반적으로 점탄성 감쇠기를 건물에 설치함으로써 감쇠비와 함께 강성도가 증가하여 지진 응답을 감소시키는데 기여하나, 대부분은 감쇠기의 역할에 의해 증가된 감쇠비의 영향인 것으로 밝혀졌다. 모드 변형에너지법을 이용하여 감쇠기에 의해 증가된 등가구조 감쇠를 성공적으로 예측할 수 있으며 따라서 점탄성 감쇠기를 설치한 건물의 지진 응답이 일반적인 모드 해석 기법을 이용한 수치모형해석에 의해 정확히 예측된다.

• Parasites, Hosts and Diseases
• /
• 제51권1호
• /
• pp.85-92
• /
• 2013

IL-23 and IL-12 are structurally similar and critical for the generation of efficient cellular immune responses. Toxoplasma gondii induces a strong cell-mediated immune response. However, little is known about IL-23 secretion profiles in T. gondii-infected immune cells in connection with IL-12. We compared the patterns of IL-23 and IL-12 production by THP-1 human monocytic cells in response to stimulation with live or heat-killed T. gondii tachyzoites, or with equivalent quantities of either T. gondii excretory/secretory proteins (ESP) or soluble tachyzoite antigen (STAg). IL-23 and IL-12 were significantly increased from 6 hr after stimulation with T. gondii antigens, and their secretions were increased with parasite dose-dependent manner. IL-23 concentrations were significantly higher than those of IL-12 at the same multiplicity of infection. IL-23 secretion induced by live parasites was significantly higher than that by heat-killed parasites, ESP, or STAg, whereas IL-12 secretion by live parasite was similar to those of ESP or STAg. However, the lowest levels of both cytokines were at stimulation with heat-killed parasites. These data indicate that IL-23 secretion patterns by stimulation with various kinds of T. gondii antigens at THP-1 monocytic cells are similar to those of IL-12, even though the levels of IL-23 induction were significantly higher than those of IL-12. The detailed kinetics induced by each T. gondii antigen were different from each other.

• 수산해양기술연구
• /
• 제46권2호
• /
• pp.173-183
• /
• 2010

In a split beam echo sounder, the transducer design needs to have minimal side lobes because the angular position and level of the side lobes establishes the usable signal level and phase angle limits for determining target strength. In order to suppress effectively the generation of unwanted side lobes in the directivity pattern of split beam transducer, the spacing and size of the transducer elements need to be controlled less than half of a wavelength. With this purpose, a 50 kHz tonpilz type transducer with a half-wavelength diameter in relation to the development of a split beam transducer was designed using the equivalent circuit model, and the underwater performance characteristics were measured and analyzed. From the in-air and in-water impedance responses, the measured value of the electro-acoustic conversion efficiency for the designed transducer was 51.6%. A maximum transmitting voltage response (TVR) value of 172.25dB re $1{\mu}Pa/V$ at 1m was achieved at 52.92kHz with a specially designed matching network and the quality factor was 10.3 with the transmitting bandwidth of 5.14kHz. A maximum receiving sensitivity (SRT) of -183.57dB re $1V/{\mu}Pa$ was measured at 51.45kHz and the receiving bandwidth at -3dB was 1.71kHz. These results suggest that the designed tonpilz type transducer can be effectively used in the development of a split beam transducer for a 50kHz fish sizing echo sounder.

• Steel and Composite Structures
• /
• 제35권2호
• /
• pp.187-197
• /
• 2020

Ground motion records are commonly used for fragility curves (FCs) developing utilized in seismic loss estimating analysis for earthquake prone zones. These records could be 'real', say the recorded acceleration time series or 'simulated' records consistent with the regional seismicity and produced by use of alternative simulation methods. This study has focused on fragility curves developing for masonry buildings through computational 'simulated' ground motion records while evaluating the properness of these fragilities compared to the curves generated by the use of 'real' records. Assessing the dynamic responses of structures, nonlinear computational time history analyses through the equivalent single degree of freedom systems have been implemented on OpenSees platform. Accordingly, computational structural analyses of multi-story 3D frame structures with different stiffening members considering soil interaction have been carried out with finite element software according to (1992) Earthquake East-West component. The obtained results have been compared to each frame regarding soil interaction. Conclusion and recommendations with the discuss of obtaining findings are presented.

• Structural Engineering and Mechanics
• /
• 제71권4호
• /
• pp.391-405
• /
• 2019

Compared to the ambient vibration test mainly identifying the structural modal parameters, such as frequency, damping and mode shapes, the impact testing, which benefits from measuring both impacting forces and structural responses, has the merit to identify not only the structural modal parameters but also more detailed structural parameters, in particular flexibility. However, in traditional impact tests, an impacting hammer or artificial excitation device is employed, which restricts the efficiency of tests on various bridge structures. To resolve this problem, we propose a new method whereby a moving vehicle is taken as a continuous exciter and develop a corresponding flexibility identification theory, in which the continuous wheel forces induced by the moving vehicle is considered as structural input and the acceleration response of the bridge as the output, thus a structural flexibility matrix can be identified and then structural deflections of the bridge under arbitrary static loads can be predicted. The proposed method is more convenient, time-saving and cost-effective compared with traditional impact tests. However, because the proposed test produces a spatially continuous force while classical impact forces are spatially discrete, a new flexibility identification theory is required, and a novel structural identification method involving with equivalent load distribution, the enhanced Frequency Response Function (eFRFs) construction and modal scaling factor identification is proposed to make use of the continuous excitation force to identify the basic modal parameters as well as the structural flexibility. Laboratory and numerical examples are given, which validate the effectiveness of the proposed method. Furthermore, parametric analysis including road roughness, vehicle speed, vehicle weight, vehicle's stiffness and damping are conducted and the results obtained demonstrate that the developed method has strong robustness except that the relative error increases with the increase of measurement noise.

• Journal of Ginseng Research
• /
• 제46권3호
• /
• pp.387-395
• /
• 2022

Background: Fermentation may alter the bioavailability of certain compounds, which may affect their efficacy and pharmacological responses. This study investigated the antiplatelet effects of red ginseng extract (RGE) and fermented red ginseng extract (FRG). Methods: A rodent model was used to evaluate the antiplatelet and antithrombotic effects of the extracts. Rats were orally fed with human equivalent doses of the extracts for 1 week and examined for various signaling pathways using standard in vivo and ex vivo techniques. Light transmission aggregometry was performed, and calcium mobilization, dense granule secretion, integrin α_IIbβ₃-mediated signaling molecules, cyclic nucleotide signaling events, and various protein molecules were evaluated ex vivo in collagen-stimulated washed platelets. Furthermore, antithrombotic properties were evaluated using a standard acute pulmonary thromboembolism model, and the effects on hemostasis were investigated using rat and mice models. Results: Both RGE and FRG significantly inhibited platelet aggregation, calcium mobilization, and dense granule secretion along with integrin-mediated fibrinogen binding and fibrinogen adhesion. cAMP levels were found to be elevated in RGE-treated rat platelets. Ginseng extracts did not exert any effect on prothrombin time and activated partial thromboplastin time. RGE-treated mice showed significantly better survival under thrombosis than FRG-treated mice, with no effects on hemostasis, whereas FRG-treated mice exhibited a slight increment in bleeding time. Conclusion: Both extracts, especially RGE, are remarkable supplements to maintain cardiovascular health and are potential candidates for the treatment and prevention of platelet-related cardiovascular disorders.

• 한국전산구조공학회논문집
• /
• 제35권5호
• /
• pp.317-324
• /
• 2022

본 논문에서는 등가 단자유도를 이용하여 구조부재의 정적변위를 고려하는 해석기법을 제시하였다. 기존의 단자유도 비선형 동적 해석 알고리듬을 구조부재의 초기정적변위의 영향을 고려할 수 있도록 개선하였다. 가정된 폭발하중 지속시간과 부재의 고유주기 비에 따라 정적변위가 최대응답에 미치는 영향의 차이와 폭발하중의 방향과 초기변위의 방향에 따른 차이를 확인하였다. 이에 따라 기존의 응답 차트를 정적변위를 고려할 수 있도록 폭발하중의 형태에 따라 각각 제시하였다. 설계 예제를 정적변위가 고려된 응답 차트에 적용하여 부재의 최대 변위를 비교 및 분석하였다. 본 연구의 결과를 통해 초기 정적변위를 고려한 구조부재의 최대응답을 쉽게 산정할 수 있으며 본 연구에서 제시한 응답 차트는 플랜트 또는 군사시설물의 내폭 설계에 활용될 수 있다.

• Wind and Structures
• /
• 제34권2호
• /
• pp.231-257
• /
• 2022

Transmission lines systems are important components of the electrical power infrastructure. However, these systems are vulnerable to damage from high wind events such as hurricanes. This study presents the results from a 1:50 scale aeroelastic model of a multi-span transmission lines system subjected to simulated hurricane winds. The transmission lines system considered in this study consists of three lattice towers, four spans of conductors and two end-frames. The aeroelastic tests were conducted at the NSF NHERI Wall of Wind Experimental Facility (WOW EF) at the Florida International University (FIU). A horizontal distortion scaling technique was used in order to fit the entire model on the WOW turntable. The system was tested at various wind speeds ranging from 35 m/s to 78 m/s (equivalent full-scale speeds) for varying wind directions. A system identification (SID) technique was used to evaluate experimental-based along-wind aerodynamic damping coefficients and compare with their theoretical counterparts. Comparisons were done for two aeroelastic models: (i) a self-supported lattice tower, and (ii) a multi-span transmission lines system. A buffeting analysis was conducted to estimate the response of the conductors and compare it to measured experimental values. The responses of the single lattice tower and the multi-span transmission lines system were compared. The coupling effects seem to drastically change the aerodynamic damping of the system, compared to the single lattice tower case. The estimation of the drag forces on the conductors are in good agreement with their experimental counterparts. The incorporation of the change in turbulence intensity along the height of the towers appears to better estimate the response of the transmission tower, in comparison with previous methods which assumed constant turbulence intensity. Dynamic amplification factors and gust effect factors were computed, and comparisons were made with code specific values. The resonance contribution is shown to reach a maximum of 18% and 30% of the peak response of the stand-alone tower and entire system, respectively.

• 대한토목학회논문집
• /
• 제26권3A호
• /
• pp.497-512
• /
• 2006

본 논문에서는 구조물의 모든 진동모드를 고려하는 모드별 비탄성 정적 해석법을 바탕으로 하여 다경간 연속 교량 구조물의 내진 역량을 평가할 수 있는 간단하고 효율적인 해석 방법을 제시하였다. 동일한 항복 후 기울기비와 근사 탄성변형 형상의 개념을 새롭게 도입하여 비탄성 구조계에 모드별 중첩이론을 직접 적용함으로써 발생하던 기존의 간섭 효과를 소거시켰다. 나아가 앞서 언급한 두 가지 개념과 적절한 분포하중을 정적 해석에 사용함으로써 더욱 간편한 해석 과정을 통하여 모든 종류의 교량 구조물에 대한 동적 거동을 예측하는 것이 가능해 졌다. 마지막으로 제안한 방법의 효용성과 적용성을 확인하기 위하여 4가지의 교량 모델에 대한 비선형 시간이력 해석과 간편화된 비선형 정적 해석의 변위예측 결과를 비교 분석하였다.