• 제목/요약/키워드: equivalent mass

검색결과 544건 처리시간 0.032초

탄성지지된 시스템의 마운트 고체음저감 성능에 관한 연구 (A Study on Mount Performance for Structure-Borne Noise Reduction in Resiliently Mounted System)

  • 김현실;김재승;김봉기
    • The Journal of the Acoustical Society of Korea
    • /
    • 제26권2E호
    • /
    • pp.50-55
    • /
    • 2007
  • SBN (Structure-Borne Noise) reduction in resiliently mounted machineries are predicted by using mass-spring model and wave model. In mass-spring model, mount is modeled as a spring, while in wave model, mount is considered as an equivalent elastic rod for taking account into longitudinal wave propagation. The predictions for SBN reduction through mounts are compared to the measurements for four different pumps. It is found that the mass-spring model is valid only in low frequency range below few hundred Hz, while for high frequency ranges longitudinal wave propagation in the mount must be considered to explain the measurements. It is also shown that impedance of the floor slightly affects low frequency behaviour in mass-spring and wave model below 50 Hz - 80 Hz, so that in engineering practice the effect of floor impedance may be neglected in computing mount performance.

Global Star Formation Efficiency of Local Galaxies

  • Shim, Hyunjin
    • 한국지구과학회지
    • /
    • 제34권5호
    • /
    • pp.407-414
    • /
    • 2013
  • This study presents the global star formation efficiency (SFE) of 272 local star-forming galaxies based on the HI gas mass, stellar mass, star formation rate (SFR), and morphology. The SFE increases as the stellar mass increases while the specific SFR decreases. The SFE is enhanced for galaxies with large H$\acute{a}$ equivalent widths, which is primarily due to the large SFR, not due to the large available amount of gas. The SFE is also enhanced by a factor of ~2 for merging systems compared to the normal spirals, showing that the merger-induced high pressure and density environment are crucial for the active star formation. Based on the SFR scaling relation, I present a SFR calibration formula using the HI gas mass.

등가 종 모델을 이용한 맥놀이 주기 조절법 (Beat Period Tuning Method Using an Equivalent Bell Model)

  • 김석현;이중혁
    • 한국음향학회지
    • /
    • 제31권8호
    • /
    • pp.561-568
    • /
    • 2012
  • 본 연구는 등가 종 모델을 이용하여 한국종의 맥놀이 주기를 조절하는 방법을 제시한다. 한국종이 갖고 있는 미세한 비대칭성은 하나의 원주 모드를 미세한 주파수의 차이를 갖는 모드 쌍으로 분리시키는데, 이 모드 쌍의 상호간섭에 의해서 진동과 음향의 맥놀이가 발생한다. 등가 종은 축대칭 종에 등가 집중질량을 부착시킨 미소 비대칭 구조물로, 실제 종의 모드 쌍과 동일한 모드 특성을 갖는다. 등가 종 모델은 회전 쉘 이론을 근거로, 유한요소해석을 통해서 구성된다. 맥놀이 특성을 변화시키기 위하여 국부적으로 요소 두께를 감소시킬 때, 등가 종을 이용하여 맥놀이 주기를 예측한다. 예측 결과는 시험 종에 대한 실험을 통해 그 타당성을 확인한다. 본 방법은 대형 종의 맥놀이 주기 조절에 소요되는 시간을 크게 줄일 수 있을 것이다.

THE LUMINOSITY FUNCTION AND INITIAL MASS FUNCTION FOR THE PLEIADES CLUSTER

  • LEE SEE WOO;SUNG HWANKYUNG
    • 천문학회지
    • /
    • 제28권1호
    • /
    • pp.45-59
    • /
    • 1995
  • In the best observed Pleiades cluster, the luminosity function(LF) and mass function(MF) for main sequence(MS) stars extended to $Mv{\approx}15.5(V{\approx}21)$ are very similar to the initial luminosity function(ILF) and initial mass function(IMF) for field stars in the solar neighborhood showing a bump at log $m{\simeq}-0.05$ and a dip at log $m{\simeq}-0.12$. This dip is equivalent to the Wielen dip appearing in the LF for the field stars. The occurence of these bump and dip is independent of adopted mass-luminosity relation(MLR) . and their characteristics could be explained by a time-dependent bimodal IMF. The model with this IMF gives a total cluster mass of $\~700M_\bigodot,\;\~25$ brown dwarfs and $\~3$ white dwarfs if the upper mass limit of progenitor of white dwarf is greater than $4.5M_\bigodot$. The cluster age on the basis of LF for brightest stars is given by $\~8\times10^7yr$ and all stars in the cluster lie along the single age sequence in the C-M diagram without showing a large dispersion from the sequence.

  • PDF

Use of semi-active tuned mass dampers for vibration control of force-excited structures

  • Setareh, Mehdi
    • Structural Engineering and Mechanics
    • /
    • 제11권4호
    • /
    • pp.341-356
    • /
    • 2001
  • A new class of semi-active tuned mass dampers, named as "Ground Hook Tuned Mass Damper" (GHTMD) is introduced. This TMD uses a continuously variable semi-active damper (so called 'Ground-Hook') in order to achieve more reduction in the vibration level. The ground-hook dampers have been used in the auto-industry as a means of reducing the vibration of primary suspension systems in vehicles. This paper investigates the application of this damper as an element of a tuned damper for the vibration reduction of force-excited single degree of freedom (SDOF) models that can be representative of many structural systems. The optimum design parameters of GHTMDs are obtained based on the minimization of the steady-state displacement response of the main mass. The optimum design parameters which are evaluated in terms of non-dimensional values of the GHTMD are obtained for different mass ratios and main mass damping ratios. Using the frequency responses of the resulting systems, performance of the GHTMD is compared to that of equivalent passive TMD, and it is found that GHTMDs are more efficient. A design methodology to obtain the tuning parameters of GHTMD using the relationships developed in this paper is presented.

유전자 알고리즘을 이용한 SUSPENSION SEAT SYSTEM의 진동 승차감 최적화 (Vibration Ride Quality Optimization of a Suspension Seat System Using Genetic Algorithm)

  • 박선균;최영휴;최헌오;배병태
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 춘계학술대회논문집B
    • /
    • pp.584-589
    • /
    • 2001
  • This paper presents the dynamic parameter design optimization of a suspension seat system using the genetic algorithm. At first, an equivalent 1-D.O.F. mass-spring-damper model of a suspension seat system was constructed for the purpose of its vibration analysis. Vertical vibration response and transmissibility of the equivalent model due to base excitations, which are defined in the ISO's seat vibration test codes, were computed. Furthermore, seat vibration test, that is ISO's damping test, was carried out in order to investigate the validity of the equivalent suspension seat model. Both analytical and experimental results showed good agreement each other. For the design optimization, the acceleration transmissibility of the suspension seat model was adopted as an object function. A simple genetic algorithm was used to search the optimum values of the design variables, suspension stiffness and damping coefficient. Finally, vibration ride performance test results showed that the optimum suspension parameters gives the lowest vibration transmissibility. Accordingly the genetic algorithm and the equivalent suspension seat modelling can be successfully adopted in the vibration ride quality optimization of a suspension seat system.

  • PDF

철도차량용 허니콤재의 차음성능 예측모델 (Prediction Model of the Sound Transmission Loss of Honeycomb Panels for Railway Vehicles)

  • 김석현;백인수;이현우;김정태
    • 한국철도학회논문집
    • /
    • 제11권5호
    • /
    • pp.465-470
    • /
    • 2008
  • 본 논문에서는 철도 차량용 허니콤 판재를 대상으로 음투과 손실을 검토한다. 허니콤재의 음투과 손실을 예측하는 데에는 등가 직방성 평판 모델과 등가 질량법칙을 적용한다. 음투과 손실의 예측치를 측정치와 비교하여 예측 모델의 신뢰도와 한계를 검토한다. 또한 일치효과와 국부공진 효과가 차음성능에 미치는 효과를 검토한다. 본 연구는 국부공진 주파수대역을 적절히 적용한다면, 등가 직방성 평판 모델을 허니콤재의 음투과손실 예측모델로 사용 할 수 있음을 보인다. 최종적으로, 국부 공진에 의한 차응성능의 급격한 저하에 대한 대책을 제시하고 그 차음 성능에 대한 효과를 분석한다.

고층 벽식 아파트의 지진해석을 위한 등가모델 (An equivalent model for the seismic analysis of high-rise shear wall apartments)

  • 김태완;박용구;김현정;이동근
    • 한국지진공학회논문집
    • /
    • 제11권5호
    • /
    • pp.11-21
    • /
    • 2007
  • 현재 국내에서도 내진설계에 대한 요구 및 관심이 증가하여 지진해석의 필요성이 증대되고 있다. 특히 벽식 아파트는 주거용으로 가장 많이 건설되고 있어 내진설계를 위한 지진해석이 활발히 수행되고 있다. 지진해석을 위해 벽식 아파트 전체를 유한요소로 세분화하여 모형화하는 것은 시간 및 노력에 있어 효율적이지 못하다. 따라서 자유도를 감소시키면서 실제 구조물의 동적 거동을 정확히 표현할 수 있는 등가모델이 필요하다. 본 연구에서는 구조물의 변형형상과 밀접한 관계가 있는 유효질량계수를 이용하여 간편하게 사용할 수 있는 등가모델 구성방법을 제안하였다. 이 등가모델은 기둥과 보로 구성된 골조구조물을 사용하여 벽식 구조물을 등가의 모델로 치환하였다. 등가모델은 어떤 상용프로그램에서도 쉽게 적용할 수 있으며, 해석시간단축이 가능하여 단시간 다양한 지진에 대한 해석이 필요한 경우 매우 유용하게 사용될 수 있다. 또한 등가모델은 바닥슬래브를 모형화 할 수 있어 실제 벽식 아파트의 거동을 잘 표현할 수 있다. 더욱이 등가모델은 구조물의 비대칭성을 표현할 수 있어 매우 우수하다.

Hoek-Brown 파괴기준의 비선형성을 고려한 암반사면 안정성 평가의 수치해석적 연구 (Numerical Study on the Stability Analyses of Rock Slopes considering Non-linear Characteristics of Hoek-Brown Failure Criterion)

  • 천병식;이진무;최현석;서덕동
    • 한국지반환경공학회 논문집
    • /
    • 제4권2호
    • /
    • pp.77-91
    • /
    • 2003
  • 연속체 해석을 위한 암반거동 모델로서 널리 이용되고 있는 Hoek-Brown 파괴기준은 1980년도에 발표된 이후 수차례의 수정 보완을 거쳐 1994년에 발표된 Generalized Hoek-Brown 파괴기준식을 토대로 현재 암반을 대상으로 한 지반구조물 해석에 많이 적용되고 있다. 그러나 지반구조물 수치해석시 Hoek-Brown 파괴기준의 적용은 일반적으로 등가의 Mohr-Coulomb 전단강도정수를 산정하여 간접적으로 이용하게 되는데, 이때 등가의 암반 전단강도정수를 암반내 주응력 분포와 상관없이 일정 상수로 적용함으로서 Hoek-Brown 파괴기준의 비선형성을 고려하지 못하는 단점이 있다. 따라서 본 연구에서는 암반사면의 안정성 평가를 위한 연속체 해석시 Hoek-Brown 파괴기준의 비선형성을 고려할 수 있는 해석기법을 검토하고, 수치해석기법에 의한 사면안정검토에 주로 이용되고 있는 강도감소법을 이용하여 암반사면의 안정성을 정량적으로 평가하고자 하였다. 특히 최근에 발표된 수정 Hoek-Brown 파괴기준을 토대로 수정된 등가 Mohr-Coulomb 강도정수 산정법과 사면굴착시 발파 및 응력이완에 의한 암반 교란/손상을 고려한 암반교란상수(Disturbance Factor) D을 이용하여 안정해석을 수행하였다.

  • PDF