• Journal of the Korean Physical Society
• /
• 제73권9호
• /
• pp.1377-1384
• /
• 2018

Accurate measurement of the absorbed dose and the effective dose is required in dental panoramic radiography involving relatively low energy with a rotational X-ray tube system using long exposures. To determine the effectiveness of measuring the irradiation by using passive dosimetry, we compared the entrance skin doses by using a radiophotoluminescent glass dosimeter (RPL) and an optically stimulated luminescence detector (OSL) in a phantom model consisting of nine and 31 transverse sections. The parameters of the panoramic device were set to 80 kV, 4 mA, and 12 s in the standard program mode. The X-ray spectrum was applied in the same manner as the panoramic dose by using the SpekCalc Software. The results indicated a mass attenuation coefficient of $0.008226cm^2/g$, and an effective energy of 34 keV. The equivalent dose between the RPL and the OSL was calculated based on a product of the absorbed doses. The density of the aluminum attenuators was $2.699g/cm^3$. During the panoramic examination, tissue absorption doses with regard to the RPL were a surface dose of $75.33{\mu}Gy$ and a depth dose of $71.77{\mu}Gy$, those with regard to the OSL were surface dose of $9.2{\mu}Gy$ a depth dose of $70.39{\mu}Gy$ and a mean dose of $74.79{\mu}Gy$. The effective dose based on the International Commission on Radiological Protection Publication 103 tissue weighting factor for the RPL were $0.742{\mu}Sv$, $8.9{\mu}Sv$, $2.96{\mu}Sv$ and those for the OSL were $0.754{\mu}Sv$, $9.05{\mu}Sv$, and $3.018{\mu}Sv$ in the parotid and sublingual glands, orbit, and thyroid gland, respectively. The RPL was more effective than the OSL for measuring the absorbed radiation dose in low-energy systems with a rotational X-ray tube.

• Nuclear Engineering and Technology
• /
• 제53권6호
• /
• pp.2000-2010
• /
• 2021

Mechanical moduli, such as Young's modulus (E), Bulks modulus (B), Shear modulus (S), longitudinal modulus (L), Poisson's ratio (σ) and micro Hardness (H) were theoretically calculated for (100-x)TeO₂+x MgO glasses, where x = 10, 20, 30, 40 and 45 mol%, based on the Makishima-Mackenzie model. The estimated results showed that the mechanical moduli and the microhardness of the glasses were improved with the increase of the MgO contents in the TM glasses, while Poisson's ratio decreased with the increase in MgO content. Moreover, the radiation shielding capacity was evaluated for the studied TM glasses. Thus, the linear attenuation coefficient (LAC), mass attenuation coefficient (MAC), transmission factor (TF) and half-value thickness (𝚫_0.5) were simulated for gamma photon energies between 0.344 and 1.406 MeV. The simulated results showed that glass TM10 with 10 mol % MgO possess the highest LAC and varied in the range between 0.259 and 0.711 cm^-1, while TM45 glass with 45 mol % MgO possess the lowest LAC and vary in the range between 0.223 and 0.587 cm^-1 at gamma photon energies between 0.344 and 1.406 MeV. Furthermore, the BXCOM program was applied to calculate the effective atomic number (Z_eff), equivalent atomic number (Z_eq) and buildup factors (EBF and EABF) of the glasses. The effective removal cross-section for the fast neutrons (ERCSFN, ∑_R) was also calculated theoretically. The received data depicts that the lowest ∑_R was achieved for TM10 glasses, where ∑_R = 0.0193 cm² g^-1, while TM45 possesses the highest ERCSFN where ∑_R = 0.0215 cm² g^-1.

• 한국건설순환자원학회논문집
• /
• 제10권4호
• /
• pp.577-583
• /
• 2022

본 연구에서는 고로슬래그 미분말, 팽창재 및 무수석고로 이루어진 무기계 자기치유 소재를 사용하여 제조한 자기치유 모르타르의 특성을 조사하였다. 무기계 치유재료의 사용량이 다른 3종류의 자기치유 모르타르를 대상으로 압축강도를 측정하고 정수위 투수시험를 통하여 치유성능을 평가하였다. 치유성능 평가지표로 균열유도재령애 따른 치유율과 등가균열폭을 활용하였다. 자기치유 모르타르의 압축강도 발현, 치유재령에 따른 치유율 변화와 경제성을 고려하여 무기계 혼합재의 최적 사용량을 시멘트 질량 대비 20 %로 제안하였다.

• Clinical and Experimental Reproductive Medicine
• /
• 제49권1호
• /
• pp.57-61
• /
• 2022

Objective: This study aimed to evaluate whether human chorionic gonadotropin (hCG) therapy is beneficial for improving semen parameters and clinical hypogonadism symptoms in hypogonadic oligozoospermic or severe oligozoospermic men with low or borderline testosterone levels. Methods: A weekly dose of 250 ㎍ (equivalent to approximately 6,500 IU) of hCG was administered subcutaneously for 3-6 months to 56 hypogonadic oligozoospermic or severe oligozoospermic men. Semen, biochemical, and genetic analyses were performed before the start of treatment followed by analyzing semen parameters every 3 months after the start of therapy. We grouped participants into responders and non-responders depending on positive changes in semen parameters. Results: Out of 56 men, 47 (83.93%) responded, while 9 (16.07%) did not. Upon statistical analysis, it was found that age did not affect the overall outcomes (p=0.292); however, men with higher body mass index (BMI; 28.09±3.48 kg/m²) showed better outcomes than those with low BMI (25.33±3.06 kg/m²) (p=0.042). The duration of therapy (in months) was higher in non-responders than in responders (p=0.020). We found significant improvements in sperm concentration (p=0.006) and count (p=0.005) after 3 months of therapy. Sperm motility and progressive motility were also found to be higher in responders, but did not show statistically significant changes. Conclusion: We conclude that hCG therapy can be beneficial in men with hypogonadic oligozoospermia or severe oligozoospermia.

• 한국건설순환자원학회논문집
• /
• 제10권1호
• /
• pp.15-22
• /
• 2022

이 연구에서는 매년 대량으로 발생하는 커피찌꺼기를 건설소재로 재활용하기 위해 커피찌꺼기와 커피찌꺼기 애시를 혼입한 시멘트 모르타르의 수화반응성을 검토하고 강도 특성을 조사하였다. 연구 결과, 커피찌꺼기의 소성온도가 높아질수록 유기물의 연소로 인한 질량 손실은 커졌으나 밀도는 증가하는 것으로 나타났다. 또한 커피찌꺼기를 혼입했을 때는 시멘트 수화반응성이 저조하여 압축강도가 현저히 낮아졌다. 반면, 800 ℃에서 소성시킨 커피찌꺼기 애시는 수화반응이 원활하였으며, 압축강도는 OPC 모르타르와 동등한 수준으로 나타났다.

• 한국수산과학회지
• /
• 제56권1호
• /
• pp.21-27
• /
• 2023

Lotus Nelumbo nucifera seed protein (LSP) was isolated by alkaline solubilization after removing fat and phenolics by hexane and ethanol treatment. Antioxidant peptides from LSP were produced with Alcalase^® and pepsin and hydroxyl radical scavenging activities were determined. LSP-Alcalase^® hydrolysates showed higher hydroxyl radical scavenging activity than LSP-pepsin hydrolysates. To purify antioxidant peptides, LSP-Alcalase^® hydrolysates were subjected to high performance liquid chromatography (HPLC) separation on the C18 column and the active fraction was further purified using a Superdex^TM peptide 10/300 GL column. Finally, the active fraction (F8-2) was evaluated for antioxidant activities by 2,2-diphenyl-1-picrylhydrazyl (DPPH), hydroxyl radical scavenging, and oxygen radical absorbance capacity (ORAC) assays. The EC₅₀ values of the F8-2 were 105.81±0.02 ㎍/mL for DPPH and 32.26±0.02 ㎍/mL for hydroxyl radical and the F8-2 exhibited 7.22 μM trolox equivalent (TE)/100 ㎍ F8-2. Glutathione (GSH), which is a positive control, showed EC₅₀ values of 19.87±0.01 ㎍/mL for DPPH and 15.95±0.03 ㎍/mL for hydroxyl radical and an ORAC value of 14.17±0.03 μM TE/100 ㎍ GSH. Finally, sixteen peptides were identified by liquid chromatography-tandem mass spectrometry (LC-MS/MS). Among them, Ile-Tyr and Leu-Tyr showed higher antioxidant scores.

• 한국산업융합학회 논문집
• /
• 제26권2_2호
• /
• pp.285-291
• /
• 2023

In this paper, in order to secure the safety and productivity of pine cone harvest, modeling and structural analysis of the hammering system for pine cone harvest drone that can easily access pine cone of Pinus koraiensis and collide with them to harvest them was performed. It calculate the equivalent stress for the structure of the hammering system and the yield strength of the applied material by applying the shear force of the stalk at which the pine cone is separated from the branch, and it is to verify the safety of the structure and propose an optimal design through appropriate factor of safety and design change. The shear force of the stalk at which the pine cone was separated from the branch was 468 N, and was applied to both ends of the hammering system. The yield strength of SS400 steel used in the hammering system is 245 ㎫, and the design change and structural analysis were performed so that the Von Mises stress could be less than 122.5 ㎫ by applying the factor of safety of 2.0 or more. As a result of the structural analysis of the frist modeling, the Von Mises stress was 220.3 ㎫, the factor of safety was 1.12, and the stress was concentrated in the screw fastening holes. As a result of the design change of the screw fastening holes, the Von Mises stress was 169.4 ㎫, the factor of safety was 1.45, and the stress was concentrated on the side part. As a result of the design change by changing screw fastening holes and adding ribs, the Von Mises stress was 121.6 ㎫, and the factor of safety was 2.02. The safety of the hammering system was secured with an optimal design with little change in mass. There was no deformation or damage as a result of experimenting on pine cone harvest by manufacturing the hammering system with an optimal design.

• 한국분무공학회지
• /
• 제28권1호
• /
• pp.16-23
• /
• 2023

The objective of this numerical study is to investigate the effect of the shape and material of the blower blade for the electrified speed sprayer on the blowing performance. The shape of the blade was changed to the bonding angle, the number of blades, the width of the blade, and the blade length based on the existing model. In order to obtain the reliability of the numerical model, the analysis of the grid dependence was performed in the numerical analysis. The numerical analysis results were compared and analyzed in terms of the agricultural chemical penetration length characteristics, flow uniformity characteristics, and velocity distribution characteristics. Furthermore, the effect of material change on weight reduction and structural characteristics was also compared and analyzed. As a result of the analysis, it was found that the optimal condition was that the blade angle was 45°, the number of blades was 12, and the width was 115 mm, which was confirmed through a comparison of the inlet mass flow rate. As a result of the equivalent stress lower than the yield strength due to the material change from aluminum to steel compared to the existing steel, structural defects do not appear, and it is judged that the operation time compared to the battery capacity will be improved through the weight reduction of the blade.

• 한국해양생명과학회지
• /
• 제2권2호
• /
• pp.83-89
• /
• 2017

In abalones, interspecific hybridization has been suggested as a possible means to increase production and desired traits for the industry. In Korea, Haliotis gigantea is considered a species with a larger size and higher temperature tolerance than H. discus hannai. However, H. discus hannai is considered the most valuable and popular fishery resource due to its better acceptance and higher market prices. Thus, viable interspecific hybrids have been produced by artificial inseminating H. gigantea eggs with H. discus hannai sperm. However, the reciprocal hybrid cross was not successful. In this study, the hybridity and the growth and thermal tolerance performance of the interspecific hybrids were examined. A combination of various assays revealed maximum growth occurrence at 21℃ and the higher growth rate in the hybrids than that of H. discus hannai parent. In addition, the growth and survival at high-temperature (28℃) of the hybrids was equivalent to that of the highly tolerant H. gigantea parent, suggesting new possibilities to overcome the mass mortality in H. discus hannai during high temperature periods of summer season in Korea. Furthermore, the induced interspecific hybrid status was confirmed by the presence of species-specific bands for each parental species of the random amplified polymorphic DNA (RAPD) profiles using universal rice primer (URP), which could be used as speciesspecific markers to distinguish the hybrids and their parental species.

• Restorative Dentistry and Endodontics
• /
• 제45권4호
• /
• pp.45.1-45.8
• /
• 2020

Objective: The aim of this study was to introduce a gelatin/bovine serum albumin (BSA) tissue standard, which provides dissolution properties identical to those of biological tissues. Further, the study evaluated whether the utilization of endodontic activating devices led to enhanced phantom dissolution rates. Materials and Methods: Bovine pulp tissue was obtained to determine a benchmark of tissue dissolution. The surface area and mass of samples were held constant while the ratio of gelatin and BSA were varied, ranging from 7.5% to 10% gelatin and 5% BSA. Each sample was placed in an individual test tube that was filled with an appropriate sodium hypochlorite solution for 1, 3, and 5 minutes, and then removed from the solution, blotted dry, and weighed again. The remaining tissue was calculated as the percent of initial tissue to determine the tissue dissolution rate. A radiopaque agent (sodium diatrizoate) and a fluorescent dye (methylene blue) were added to the phantom to allow easy quantification of phantom dissolution in a canal block model when activated using ultrasonic (EndoUltra) or sonic (EndoActivator) energy. Results: The 9% gelatin + 5% BSA phantom showed statistically equivalent dissolution to bovine pulp tissue at all time intervals. Furthermore, the EndoUltra yielded significantly more phantom dissolution in the canal block than the EndoActivator or syringe irrigation. Conclusions: Our phantom is comparable to biological tissue in terms of tissue dissolution and could be utilized for in vitro tests due to its injectability and detectability.