• 동력기계공학회지
• /
• 제14권1호
• /
• pp.47-52
• /
• 2010

In this study, Finite Element Analysis have been adopted to analyze reducing stress effect and used to induce the sensitivity of design parameter on various techniques which was used for reducing stress. And so it can be utilized as a data to design on similar model. The effect of reducing stress with respect to change of relief groove radius can be increased by 27.3~18.2 % more than radius of fillet. And if a shoulder fillet radius is larger, additional reducing stress by relief groove radius is not obtained. And there was only little effect on reducing stress by changing the center point of groove radius along horizontal direction. In the case that undercut radius is 1.5mm, Max. Equivalent stress is reduced by 5.71% under bending force and 11.11% under torsion. The best effect of reducing stress at undercut model was yielded when the undercut radius is a forth of difference of stepped shaft radius.

• 한국재료학회지
• /
• 제15권12호
• /
• pp.760-764
• /
• 2005

The influences of the oxidant($O_2\;and\;O_3$) on the FeOOH formation were studied with fixed $FeSO_4{\cdot}7H_2O$ concentration (0.5M) and NaOH equivalent ratio(0.5). The characteristics of the synthesized powders were evaluateed by XRD, and equantitative phase analysis. $\alpha-FeOOH$ (Geothite) and/or $\gamma-FeOOH$ was promoted when $O_3$ was used as a oxidant which is stronger oxidizing agent than $O_2$.

• 한국재료학회지
• /
• 제15권9호
• /
• pp.560-565
• /
• 2005

The objective of this paper is to decide optimal of the slot angle to minimize stress concentration in rotating disc of diamond saw. The fracture phenomena of the slot are discussed by the theoretical and experimental approaches and then some recommendation are presented to prevent the fracture. The focus of this investigation is to evaluation the effect of the slot on stress distribution using optimum design technique and finite element method(FEM) analysis. Stress concentration of the slot with respect to the various parameter of the slot such position, size, number, rotation speed. From the experimental results, when the slot angle of diamond saw is located $8^{\circ}\~12^{\circ}$ from rotating direction, the maximum equivalent stress reduces.

• 한국독성학회:학술대회논문집
• /
• 한국독성학회 2002년도 Molecular and Cellular Response to Toxic Substances
• /
• pp.164-164
• /
• 2002

The estrogenic activity of 47 plant extracts was assessed by reporter gene assay using MCF-7 breast cancer cell lines stably transfected with luciferase reporter gene. The estrogenic activity of food extracts was expressed as 17${\beta}$-estradiol(E2) equivalent concentration(EEQ), the concentration of E2 that resulted in the same relative luciferase unit(RLU) of the food extract of 0.2mg/$m\ell$.(omitted)

• 한국정밀공학회지
• /
• 제21권6호
• /
• pp.131-138
• /
• 2004

The objective of this paper is to decide optimal location of a pin-hole to minimize stress concentration around the hole in a rotating disc. The focus of this investigation is to evaluate the effect of pin-hole on stress distribution around the hole using optimum design technique and finite element analysis. Design variables are the radial and the angular location of pin-hole from center of the hole and objective function is the maximum stress around hole in a rotating disc. Using first order method of optimization technique, we found that the maximum equivalent stress around the hole with optimized pin-hole could be reduced by 15.1% compared to that without pin-hole.

• Journal of the korean society of oceanography
• /
• 제39권4호
• /
• pp.222-233
• /
• 2004

Using nitrogen as the limiting nutrient, the default version of a microplankton-detritus model linked chlorophyll concentration to the autotroph nitrogen. However, phosphorus dynamics were added to simulate the results of a microcosm experiment. Using standard parameter values with a single value of microheterotroph fraction in the microplankton taken from the observed range, the best simulation successfully captured the main features of the time-courses of chlorophyll and particulate organic carbon, nitrogen and phosphorus, with root-mean-square error equivalent to 29% of particulate concentration. A standard version of microbiological model assumes complete internal cycling of nutrient elements; adding a term for ammonium and phosphate excretion by microheterotrophs did not significantly improve predictions. Relaxing the requirement for constant microheterotroph fraction resulted in an autotroph-heterotroph model AH, with dynamics resembling those of a Lotka-Volterra predator-prey system. AH fitted the microcosm data worse than did MP, justifying the suppression of Lotka-Volterra dynamics in MP. The paper concludes with a discussion of possible reasons for the success of the simple bulk dynamics of MP in simulating microplankton behaviour.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.164-165
• /
• 2021

To prepare the good-adherent and weather-resistant acrylic resin coatings, acrylic resin was prepared by a radical polymerization. Glass transition temperature(Tg) of the acrylic copolymer was fixed at 30℃ and the contents of tertiary amine monomer(DMAEMA) was varied to be 5, 10, 15, 20 wt% respectively. γ-Glycidoxypropyltrimethoxysilane(GPTMS) containing epoxy group was used for curing agents and di-n-butyltindilaurate(DBTDL) was used for drying accelerator. The equivalent ratio of amine to epoxy was 1:1. The prepared coatings exhibited excellent adhesion to various substrates, and various physical properties of the coatings were satisfactory. The gloss retention and color difference were improved at low tertiary amine concentration. The coatings containing 10wt% tertiary amine concentration have especially good weather resistant properties.

• 대한한의학회지
• /
• 제28권1호통권69호
• /
• pp.148-158
• /
• 2007

Objective : The objective of this study was to investigate the antioxidant effects of Mori Folium extract. Methods Total antioxidant status was examined by total antioxidant capacity(TAC) and total antioxidant response(TAR) against potent free radical reactions. The effect of Mori Folium extract was examined by measuring total phenolic content, concentration at which 1,1-dipheny1-2-picrylhydrazyl(DPPH) radical scavenging activity was inhibited, inhibitory effect on lipid peroxidation, and the effect on reactive oxygen species(ROS) generation. Results : 1. TAC and TAR of Mori Folium extract at the concentration of 5 mg/ml were 1.61 and 1.24 mM Trolox equivalents, respectively. 2. Total phenolic content of Mori Folium extract at the concentration of 5 mg/Ml was 1.70 mM gallic acid equivalent. 3. Concentration of Mori Folium extract at which DPPH radical scavenging activity was inhibited by 50% was 2.29 m9/m4 as compared to 100% by Pyrogallol solution as a reference. 4. The inhibitory effect of the extract on lipid peroxidation was examined using rat liver mitochondria induced by FeSO$_4$/ascorbic acid. Mori Folium extract at the concentration of 10 mg/ml significantly decreased thiobarbituric acid reactive substances(TBARS) concentration. The extract prevented lipid peroxidation in a dose-dependent 5. The effect of Mori Folium extract on reactive oxygen species(ROS) generation was examined using a celt-free system induced by hydrogen peroxide FeSO$_4$. Addition of 1 mg/ml of Mori Folium extract significantly reduced dichlorofluorescein(DCf) fluorescence. The extract caused concentration-dependent attenuation of the increase in DCF fluorescence, indicating that the extract significantly prevented ROS generation in vitro. Conclusion ; The antioxidant effects of Mori Folium extract seem to be due, at least in part, to the prevention offree radical-induced oxidation, fllowed by inhibition of lipid peroxidation.

• 환경영향평가
• /
• 제15권3호
• /
• pp.227-235
• /
• 2006

In order to understand chemical characteristics and formation of dewfall in Miryang area, we analysed monthly distribution of dewfall, and investigated its chemical composition of dewfall. The modified teflon plate ($1m{\times}1m$) was used qualitatively to collect water soluble components at Miryang weather station from August 2002 to April 2003. Dewfall amount during the sampling periods (37 day) collected 5.28 mm. The behaviors of water soluble ions in dewfall showed the highest concentration ($555.8{\mu}eq/l$ for $Cl^-$, $338.6{\mu}eq/l$ for ${NO_3}^-$, $1118.2{\mu}eq/l$ for ${SO_4}^{2-}$, $262.7{\mu}eq/l$ for ${NH_4}^+$, $1341.0{\mu}eq/l$ for ${Ca_2}^+$, $177.8{\mu}eq/l$ for ${Mg_2}^+$, and $325.5{\mu}eq/l$ for $Na^+$) during the April, the lowest concentration ($243.6{\mu}eq/l$ for ${SO_4}^{2-}$, $39.3{\mu}eq/l$ for ${NH_4}^+$ and $456.2{\mu}eq/l$ for ${Ca_2}^+$) during the September. Monthly equivalent ratio of [${SO_4}^{2-}$]/[${NO_3}^-$] showed the highest value (6.45) during the March, the lowest value (1.86) during the September, and the mean value was 2.70.

• 한국환경과학회지
• /
• 제1권2호
• /
• pp.125-136
• /
• 1992

Digestion of a municipal wastewater sludge by the anaerobic sequencing batch reactor (ASBR) was investigated to evaluate the performance of the ASBR process at a critical condition of high-solids-content fined. The reactors were operated at an HRT of 10 days with an equivalent loading rate of 0.8-1.5 gVS/L/d at 35$^{\circ}C$ The main conclusions drawn from this study were as follows: 1. Digestion of a municipal wastewater sludge was possible using the ASBR in spite of high concentration of settleable solids in the sludge. The ASBRS with 3- and 4-day cycle period showed almost identical high digestion performances. 2. No adverse effect on digestion stability was observed In the ASBRS in spite of withdrawal and replenishment of 30% or 40% of liquid contents. A conventional anaerobic digester could be easily converted to the ASBR without any stability problem. 3. Flotation thickening occurred in thicken step of the ASBRS throughout steady state, and floating bed volume at the end of thicken period occupied about 70% of the working volume of the reactor Efficiency of flotation thickening in the ASBRS could be comparable to that of additional gravity thickening of a completely mixed digester. 4. Solids were accumulated rapidly in the ASBR during start-up period. Solids concentrations in the ASBRS were 2.6 times higher than that in the completely mixed control reactor at steady state. Dehydrogenase activity had a strong correlation with the solids concentration. Dehydrogenase activity of the digested flu형e in the ASBR was 2.9 times higher than that of the flu형e in the control reactor, and about 25 times higher than that of the subnatant in the ASBR. 5. Remarkable increase in equivalent gas production of 52% was observed at the ASBRS compared with the control reactor in spite of similar quality of clarified effluent from the ASBRS and control reactor. The increase in gas production from the ASBRS was believed to be combined results of accumulation of microorganisms, higher driving force applied, and additional long-term degradation of organics continuously accumulated.