• Journal of Ocean Engineering and Technology
• /
• v.29 no.1
• /
• pp.45-55
• /
• 2015

Because of the high stress concentration near the toe of a welded joint, the calculation of local stress using the finite element method which is relevant to the fatigue strength of the weld toe crack, is a challenging task. This is mainly caused by the sensitivity of finite element analysis, which usually occurs near the area of a dramatically changing stress field. This paper presents a novel numerical method through which a less mesh-sensitive local stress calculation can be achieved based on the 3D solid finite element, strictly sticking to the original definition of hot spot stress. In order to achieve the goal, a traction stress, defined at 0.5t and 1.5t away from the weld toe, was calculated using either a force-equivalent or work-equivalent approach, both of which are based on the internal nodal forces on the imaginary cut planes. In the force-equivalent approach, the traction stress on the imaginary cut plane was calculated using the simple force and moment equilibrium, whereas the equivalence of the work done by both the nodal forces and linearized traction stress was employed in the work-equivalent approach. In order to confirm the validity of the proposed method, five typical welded joints widely used in ships and offshore structures were analyzed using five different solid element types and four different mesh sizes. Finally, the performance of the proposed method was compared with that of the traditionally used surface stress extrapolation method. It turned out that the sensitivity of the hot spot stress for the analyzed typical welded joints obtained from the proposed method outperformed the traditional extrapolation method by far.

• Journal of Microbiology and Biotechnology
• /
• v.7 no.4
• /
• pp.267-271
• /
• 1997

We developed a dermal equivalent (DE) which was engineered using human dermal fibroblasts and a matrix of collagen gel. The in vitro construction of the DE was accomplished by casting a porcine collagen type I solution plus concentrated medium with isolated and cultured fibroblasts. These constructs were attached to culture dishes or left floating in culture medium. Contraction of attached gels results in decreased gel thickness without a change in gel diameter, and contraction of floating gels results in decreased gel thickness and diameter. After contraction, there was no increase in cell number in floating gels, but cells in attached gels began to increase after about 4 days of the lag phase in cell growth curve. At this lag phase, addition of fibroblast growth factor (FGF) at a concentration of $0.1{\mu}$/ml promoted cell proliferation in the attached collagen gels, but no effect in floating gels. These results indicate that the method of contraction had an influence on the extracellular matrix (ECM) organization, and this influenced not only cell growth but also fibroblast responsiveness to FGF. This suggests that attached collagen gel is more suitable as a dermal equivalent than the floating gel. And the final contracted area of attached gel is much larger than that of the floating gel since floating gel is contracted in all directions but attached gel is contracted only vertically.

• Korean Journal of Food Science and Technology
• /
• v.45 no.6
• /
• pp.770-776
• /
• 2013

The aim of this study was to investigate the antioxidant and anti-cancer activities of squash leaf extract (SLE) in vitro. The total polyphenol and flavonoid levels of SLE were 263.4 mg gallic acid equivalent/100 g and 73.6 mg quercetin equivalent/100 g, respectively. The radical-scavenging activity of SLE at the concentration of 300 ${\mu}g/mL$ was 69.4%. SLE significantly inhibited human cancer cell growth (by 60.6-87.9% in HCT116 colon cancer cells and by 73.4-86.4% in H1299 lung cancer cells at the concentrations of 37.5, 75, and 150 ${\mu}g/mL$) and attachment (by 28.4% in HCT116 and by 16.8% in H1299 at the concentration of 150 ${\mu}g/mL$). SLE also altered nucleus morphology and increased nuclear staining intensity (by 42.8-58.2% in HCT116 and by 25.5-32.9% in H1299 at the concentrations of 37.5 and 75 ${\mu}g/mL$), indicating its apoptosis-inducing activity. These results demonstrate the antioxidant and anti-cancer activities of SLE in vitro.

• Safety and Health at Work
• /
• v.10 no.1
• /
• pp.109-113
• /
• 2019

Background: In both developed and developing countries, noise is regarded as the most common occupational hazard in various industries. The present study aimed to examine the effect of sound pressure level (SPL) on serum cortisol concentration in three different times during the night shift. Methods: This case-control study was conducted among 75 workers of an industrial and mining firm in 2017. The participants were assigned to one of the three groups (one control and two case groups), with an equal number of workers (25 participants) in each group. Following the ISO 9612 standard, dosimetry was adopted to evaluate equivalent SPL using a TES-1345 dosimeter. The influence of SPL on serum cortisol concentration was measured during the night shift. The serum cortisol concentration was measured using a radioimmunoassay (RIA) test in the laboratory. Repeated measure analysis of variance and linear mixed models were used with ${\alpha}=0.05$. Results: The results indicated a downward trend in the serum cortisol concentration of the three groups during the night shift. Both SPL and exposure time significantly affected cortisol concentration (p < 0.0001, p < 0.0001). Conversely, age and body mass index had no significant influence on cortisol concentration (p = 0.360, p = 0.62). Conclusion: Based on the obtained results, increasing SPL will lead to enhancement of serum cortisol concentration. Given that cortisol concentration varies while workers are exposed to different SPLs, this hormone can be used as a biomarker to study the effect of noise-induced stress.

• Journal of Environmental Science International
• /
• v.8 no.2
• /
• pp.155-160
• /
• 1999

To investigate the water quality characteristics and eutrophication of the Keum River, survey were conducted on samples collected from 6 stations in Aug. and Oct. in 1995 and Jan. and May in 1996. The results were summarized as follows ; Concentration of pollutants were in the range of 1.74~6.35(mean 3.81)mg/$\ell$for BOD and 1.98~8.21(5.14)mg/$\ell$for COD and 1.46~51.94(18.52)g/$\ell$for TSS. Water quality were evaluate to be 2~3 grade of station 1 and other stations were 3~4 grade of water quality criteria. The concentration of nutrients were in the range of 55.2~735.3(309.3)$\mu\textrm{g}$-at/$\ell$for Dissolved inorganic nitrogen(DIN) and 0.06~6.03(2.80)$\mu\textrm{g}$-at/$\ell$ for dissolved inorganic phosphate(DIP). Nutrient concentrations in Keum River were usually high and the DIN/DIP ratio ranged from 72 to 2648. The concentration of chlorophyll-a was in the range of 1.1~143.7(44.3)mg/㎥. Chlorophyll-a concentration were high 10mg/㎥ except station 1, which is the value of eutrophication criteria by EPA. Correlations between nutrients and chlorophlly-a were not significant. According to eutrophication evaluation, Keum river was equivalent to the eutrophic state.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.5
• /
• pp.813-817
• /
• 1987

High value sheet resistance (Rs' 1K-33K\ulcorner/) polysilicon resistors were fabricated using double ion implantation with boron as the major dopant and phosphorus compensation. It is observed that Rs sensitivity to the net doping concentration is decreased by one order of magnitude compared to the conventional (boron implanted)polysilicon resistors. The temperature co-efficient of resistance (TCR) measured between 25\ulcorner and 125\ulcorner shows equivalent values to those of non-compensated resistors for the same Rs. A qualitative electrical conductiion mechanism for compensated polysilicon resistor is proposed, based on the existing grain boundary charge trapping theory.

• Analytical Science and Technology
• /
• v.14 no.5
• /
• pp.422-431
• /
• 2001

One pulp manufacture facility was selected as surveying facility to examine the discharged amount and generation mechanism of dioxins excepts for bleaching stage wastewater. In recovery and finishing process, 2,3,7,8-TCDF, OCDD and OCDF were mainly detected, and the ratio of PCDDs and 1,2,3,4,7,8-HxCDD as the concentration of 2,3,7,8-substitute isomer were discharged which is known as the typical emission pattern of pulp and paper manufacture facility, and the 1,2,3,7,8-PeCDD and 1,2,3,4,7,8-HxCDD were discharged more than 90% in toxic equivalent concentration. Also, the OCDD and 2,3,7,8-TCDF for 2,3,7,8-isomer concentration, and 1,2,3,7,8-PeCDD and 2,3,7,8-TCDF as toxic equivalent concentration were discharged in effluent. The detected PCDDs/PCDFs concentration were surveyed 0.2266 ng-TEQ/L for influent and 0.0377 ng-TEQ/L for effluent.

• Restorative Dentistry and Endodontics
• /
• v.19 no.2
• /
• pp.549-567
• /
• 1994

Restoration of severly damaged teeth after endodontic treatment had been an interest to many dentists, and it is a fact that there have been lots of studies about it. In these days, although we have used Para-Post, pins, threaded steel post, cast gold post and core, and so on, as a method of restoration frequently, it has been in controversy with the influence of them on the teeth and surrounding periodontal tissue. In this study, we assume that the crown of the upper incisor have severly damaged, so, after the root canal therapy, 4 types of restoration had been carried out; 1) coronal-radicular amalgam restoration, 2) after setting up the Para-Post, restore with composite resin core only, 3) after setting up the Para-Post; restore with amalgam core, then cover with the PPM crown 4) after setting up the Para-Post, restore with composite core, then cover with the PPM crown. After restoration, in order to observe the concentration of stress at internal portion of the teeth and the sourrounding periodontal tissue, developing a 2-dimensional finite element model of labiopalatal section, then loading forces from 3 direction - direction of 45 degrees from lingual side near the incisal edge, horizontal direction from labial height of contour, vertical direction at the incisal edge-were applied. The analyzed results were as follows: 1. Stress of the normal central incisor was concentrated on the dentin aroundpulp chamber, labiocervical portion of a tooth and root apex, but with the alveolar bone, in the case of load from the direction of 45 degrees from lingual side near the incisal edge showed remarkable concentration of stress: 2. Coronal-radicular amalgam technique -showed less concentration of stress on the root and surrounding periodontal tissue than the restoration with the Para-Post. 3. The von Mises equivalent stress on the Para-Post showed maximum value at root-core junction rather than both ends and model with PPM restoration with amalgam core showed the least concentration of stress. Only the force from horizontal direction showed large shear stress on internal portion of the root, root apex and alveolar bone. 4. PPM crown with composite core rarely showed the concentration of stress on root and periodontal tissue. 5. As for alveolar bone, remarkable shear stress was concentrated on labial and palatal side by horizontal load.

• Journal of Pharmacopuncture
• /
• v.11 no.1
• /
• pp.109-118
• /
• 2008

Objective : The objective of this study was to compare the antioxidant effects of hot pepper extract and capsaicin. Methods : In vitro, antioxidant activities were examined by DPPH radical scavenging activity, total antioxidant capacity(TAC), oxygen radical scavenging capacity(ORAC), inhibition of induced lipid peroxidation using liver mitochonria and total phenolic contents. Results : 1. DPPH free radical scavenging activities at the concentrations of both 1 and $10mg/m{\ell}$ were 1.2 to 1.9 times higher in capsaicin than in hot pepper extract. The concentration of capsaicin required for 50% radical scavenging was lower than that of hot pepper extract(3.9 vs $5.9mg/m{\ell}$), indicating that capsaicin had higher DPPH radical scavenging activity than hot pepper extract. 2. Total antioxidant capacities of capsaicin at the concentrations of 0.1 and 1mg/ml(13.8 and 41.3 nmol Trolox equivalent) were not significantly different from those at the concentrations of 1 and $10mg/m{\ell}$(11.4 and 41.2nmol Trolox equivalent), indicating that capsaicin showed 10 times higher ABTS radical scavenging activity compared to hot pepper extract. 3. ORAC of capsaicin at the concentrations of 1, 5, 10 and 100 mg/ml were 0.04, 0.17, 0.29 and 1.74nmol gallic acid equivalent, respectively. On the other hand, ORAC of hot pepper extract at the concentrations of 1, 5, 10 and $100{\mu}g/m{\ell}$ were 0.15, 0.44, 0.75 and 2.49nmol gallic acid equivalent, respectively, indicating that capsaicin showed higher peroxyl radical scavenging activity than hot pepper extract. 4. Inhibition of lipid peroxidation caused by hot pepper extract at the concentrations of 1 and $10mg/m{\ell}$ were 12.2 and 61.4%, respectively. Inhibition of lipid peroxidation caused by capsaicin at the concentrations of 1 and $10mg/m{\ell}l$ were 64.0 and 96.8%, respectively. Thus capsaicin showed 10 times stronger effect in inhibiton of lipid peroxidation than hot pepper extract. 5. Total phenolic contents of hot pepper extract at the concentrations of 0.1 and $1mg/m{\ell}$ were 1.4 and 20.8nmol gallic acid equivalent, respectively. Total phenolic contents of capsaicin at the concentrations of 0.1 and $1mg/m{\ell}$ were 6.1 and 55.4 nmol gallic acid equivalent, respectively, indicating that capsaicin had 2.7 to 4.3 times higher total phenolic contents than hot pepper extract. Conclusions : In summary, the results of this study demonstrate significant antioxidant activity of hot pepper extract, although the activity was lowered compared to capsaicin, suggesting that hot pepper extract play a role in prevention of oxidative-related diseases.

• Geophysics and Geophysical Exploration
• /
• v.10 no.4
• /
• pp.361-368
• /
• 2007

In this paper, we suggested the relationship between resistivity of coastal groundwater and NaCl equivalent salinity for the quantitative interpretation the results of surface/borehole resistivity and electromagnetic data. 38 groundwater samples having electrical conductivity higher than about 1,000 ${\mu}S/cm$ were analyzed to derive the empirical relationship between groundwater resistivity and NaCl equivalent salinity. We used Schlumberger chart GEN-8 to convert ion concentration from hydrochemical analysis to the equivalent NaCl salinity, and the portable meter to measure the in situ electrical conductivity of groundwater samples. From the hydrochemical analysis, relationship between the groundwater resistivity $(R_w)$ and equivalent NaCl salinity (Eq_NaCl) is expressed as Eq_NaCl=$5935.3551{\times}R_w^{-1.0993}$, and relationship between the groundwater electrical conductivity (EC) and total dissolved solids (TDS) is expressed as TDS=0.721*EC. We believe these relationships are very useful to assess the seawater intrusion in western and southern coastal area.