• Proceedings of the KWS Conference
• /
• 1996.10a
• /
• pp.186-190
• /
• 1996

Laser cladding is a technique for modification on surface in materials. This study describes a laser cladding equipment design and the results of laser cladding nickel on rolled steel for general structure. The laser clsdding equipment designed to consider continuous supply, a fixed quantity. The material used MC plastic. Laser cladding condition is found out by processing parameters. The experiment advanced to suppy substrate with powder. The substrate is rolled steel for general structure(KS D 3503) and powder is using the nickel powder for the corrosion resitance, wear resistance and surface hardness of materials. When the substrate travel on X-Y table, laser beam irradiates to prevent from oxidize with shielding gas on it. The obtained specimens measure the victors hardness test. For the research laser cladding results make a comparative study the microstructure.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.8
• /
• pp.875-878
• /
• 1999

A new concept ？？soft solution processing？？ has been introduced to fabricate advanced solid state materials in an economical, environmentally friendly, and energy and material efficient way. The prepared films show the desired and prospective properties despite of low temperature synthesis and no post-synthesis annealing. Successful examples demonstrate that soft solution processing is capable of preparing advanced materials with planned properties through the easy control of reaction conditions in a suitable aqueous solution in a single synthetic step without huge energy consumption and without any sophisticated equipment.

• Journal of Drive and Control
• /
• v.21 no.3
• /
• pp.72-76
• /
• 2024

• Journal of The Korean Association For Science Education
• /
• v.9 no.2
• /
• pp.13-27
• /
• 1989

A curriculum for teaching materials in Science Education was studied as a model for modified experiment on fundamental courses. Conscious effort can be made to desingn experiments that require minimum apparatus: that require low-cost equipment that can be made from cheap locally available materials. Computer-aided instruction programs at high school, freshman course level have been developed. The software package was consist of five programs: The program contains explanation and problems for the calculation of resonance energy, molecular structure, mole concept. Rutherford's experiment. thermodynamic processes. Special course equipment package explanation mole concept, Rutherford's experiment, thermodynamic processes. Special course were designed in Science Education with the understanding that to a certain extent science values would be covered in all of the modified experiments and program models.

• 연구논문집
• /
• s.28
• /
• pp.101-110
• /
• 1998

This study discusses the developement of hydraulic rotary actuator design technology for industrial machinery and earthmoving equipment. The lubrication and wear analysis of sliding components of the machinery are very important parameters to strength the design technique. The analysis and wear test are performed for the selected materials of the above mentioned coupled sliding members. The can be used to select the better combinations of sliding components.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1590-1592
• /
• 2009

The ubiquitous nature of large area TFT-LCD televisions are truly one of the major success stories of consumer electronic products for the $21^{st}$ century. It is the industry's ability to lower prices over the years that have made TFT-LCD television an affordable option for the majority of consumers. TFT-LCD equipment manufacturers have played a major role these cost reduction efforts. Increasing requirements for high process quality like for eg UHD panels need to be met simultaneously with the demand of an highly productive and reliable equipment. AKT provides an excellent PVD product by improving performance and cost of ownership (CoO) for Gen8.5 and beyond.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.1012-1018
• /
• 2006

In this study, the insulation performance of thermal insulation materials such as glass wool, polyetylene and flexible lastomeric foam according to water vapor permeance was estimated by using experimental correlation equation. The results showed the conductivity increment of flexible lastomeric foam which has very low-permeability (${\le}0.15[ng/{\cdot}s{\cdot}Pa]\;or\;{\mu}{\ge}1,000$) is about 50% lower than that of glass wool with the lapse of ten years. The conclusion is that moisture inevitably accumulated in permeable Insulations reduces insulation performance and also accelerates surface condensation in the case of cold water system.

• Journal of Powder Materials
• /
• v.30 no.5
• /
• pp.402-408
• /
• 2023

This study focused on improving the phase stability and mechanical properties of yttria-stabilized zirconia (YSZ), commonly utilized in gas turbine engine thermal barrier coatings, by incorporating Gd₂O₃, Er₂O₃, and TiO₂. The addition of 3-valent rare earth elements to YSZ can reduce thermal conductivity and enhance phase stability while adding the 4-valent element TiO₂ can improve phase stability and mechanical properties. Sintered specimens were prepared with hot-press equipment. Phase analysis was conducted with X-ray diffraction (XRD), and mechanical properties were assessed with Vickers hardness equipment. The research results revealed that, except for Z10YGE10T, most compositions predominantly exhibited the t-phase. Increasing the content of 3-valent rare earth oxides resulted in a decrease in the monoclinic phase and an increase in the tetragonal phase. In addition, the t(400) angle decreased while the t(004) angle increased. The addition of 10 mol% of 3-valent rare-earth oxides discarded the t-phase and led to the complete development of the c-phase. Adding 10 mol% TiO₂ increased hardness than YSZ.

• Journal of the Korean Professional Engineers Association
• /
• v.34 no.2
• /
• pp.10-13
• /
• 2001

Workpiece materials may be relatively easy to machine by traditional methods but workpiece geometry also may be a constraint. Many shapes that are geometrically difficult to handle conventionally may be candidates for nontraditional processes. Nontraditional processes provide new opportunities for product design innovation and productivity improvements. Difficult-to-machine materials of geometric shapes difficult o produce with traditional equipment and tooling, may often be easily and cost effectively machined using nontraditional processes. Notraditional machining processes are relative newcomers o the manufacturing arena. Nontraditional chemical solutions, or even electrolytic current as the working medium rather than a conventional cutting tool or abrasive to remove or shape materials.

• Proceedings of KOSOMES biannual meeting
• /
• 2018.06a
• /
• pp.177-177
• /
• 2018