• Elastomers and Composites
• /
• 제54권4호
• /
• pp.359-367
• /
• 2019

Poly(2-hydroxyethyl methacrylate) (PHEMA) hydrogels modified with various co-monomers, such as N-vinyl pyrrolidone (NVP), glycidyl methacrylate (GMA), and glycerol monomethacrylate (GMMA), were prepared to investigate the effect of adding a co-monomer on the water contents, surface wettability, and tensile modulus. These polymers were synthesized by thermal- and photo-polymerization in the presence of azobisisobutyronitrile (AIBN) and diphenyl(2,4,6-trimethylbenzoyl)-phosphineoxide (TPO) as the initiators. The characteristics of the hydrogels were analyzed via FTIR and UV/Vis spectroscopies, contact angle measurements, and tensile modulus measurements with UTM. Regarding the properties of water in the hydrogels, the ratio between free to bound water was investigated using differential scanning calorimetry (DSC). The effects of adding the co-monomers on the water content, surface wettability, and tensile modulus for soft contact lenses were also investigated. In the case of p(HEMA-co-NVP) hydrogels, the increase in the equilibrium water content (EWC) was primarily due to the increase in the bound water content. For p(HEMA-co-GMMA) hydrogels, an increase in free water content was the main reason for the increased EWC. In contrast, in the case of p(HEMA-co-GMA) hydrogels, a decrease in bound water content was observed to be the main factor that reduced the EWC. Photo-polymerized PHEMA hydrogels showed enhanced surface wettability and tensile modulus as compared to those produced via thermal polymerization.

• 통합자연과학논문집
• /
• 제7권4호
• /
• pp.266-272
• /
• 2014

Oxocane high explosives substituted to explosive group such as azide (-CH2N3), nitrate (-CH2ONO2), and hydrazine (-CH2N2H3) are investigated theoretically the acid catalyzed reaction using the semiempirical MINDO/3, MNDO and AM1 methods to use as the guidelines of high explosives. The nucleophilicity and basicity of oxocane high explosives can be explained by the value of negative charge on oxygen atom of oxocane and the reactivity in propagation step can be represented by the value of positive charge on carbon atom and low electrophile LUMO energy. It was known that carbenium ion was favorable due to the stable energy (11.745~25.461 Kcal/mol) between oxonium ion and carbenium ion in the process of cyclic oxonium ion of oxocane high explosives being converted to open carbenium ion in oxocane high explosives. The value of concentration of cyclic oxonium ion and open carbenium ion in equilibrium status was found to be a major determinant of mechanism, it was expected to react faster in the prepolymer propagation step in SN1 mechanism than in that of SN2.

• 대한화학회지
• /
• 제36권2호
• /
• pp.197-204
• /
• 1992

Cyclic acetal류 산촉매하의 중합반응에 대해서 반경험적인 MINDO/3, MNDO, $AM_1$방법 등을 사용하여 이론적으로 고찰하였다. Oxacyclic acetal의 친핵성 및 염기성은 고리 아세탈의 산소와 음전하 크기로 설명할 수 있다. 공중합하의 성장단계에서 아세탈의 반응성은 반응 중심 탄소($C_2$)의 양전하 크기와 친전자체의 낮은 LUMO에너지에 좌우됨을 예측할 수 있다. 2-butyl-1,3-dioxepane의 성장단계의 화학종인 oxonuim 이온과 carbenium 이온 사이의 계산된 안정화 에너지는 5${\sim}$7kcal/mole로 carbenium 이온이 더 유리함을 예측할 수 있다. 공중합체의 성장단계에서 두 양이온형이 빠른 속도로 평형에 도달하며, 계산 결과에 의한 반응 좌표는 $S_N1$ 메카니즘이 $S_N2$ 메카니즘보다 빠르게 진행할 것으로 예측된다.

• 한국세라믹학회지
• /
• 제40권6호
• /
• pp.519-524
• /
• 2003

Porous carbon with high surface area and pore volume was prepared by a reverse replication process and its toluene equilibrium adsorption behavior was investigated. The preparation process of the porous carbon was composed of fellowing sub-processes in series: synthesis and template preparation of silica gel, impregnation and polymerization of DVB monomer in silica template, carbonization of DVB polymer in a silica-polymer composite, and HF-assisted selective etching of silica in carbon-silica composite. The prepared porous carbon was nano porous and had ultrahigh specific surface area (2007 ㎡/g) and large pore volume (3.07 ㎤/g). The nanoporous carbon showed rapid toluene adsorption rate and good toluene adsorption capacity, compared with a commercial Y-type zeolite. In the present study, a reverse replication process to prepare nanoporous carbons will be introduced and its application potential as a gas adsorbent will be discussed.

• Journal of Pharmaceutical Investigation
• /
• 제24권4호
• /
• pp.257-263
• /
• 1994

The interpenetrating polymer networks (IPNs) of polyacrylic acid (PAA)-polyethylene glycol (PEG) were synthesized via crosslinking of PEG and simultaneous free radical polymerization of PAA. The equilibrium swelling of the IPNs matrices, ranged from 40% to 95%, was varied to a great extent as compared with PAA homopolymer due to the interpolymer interaction between PAA and PEG. The drug release kinetics of drug loaded matrices was significantly affected by the charge of drugs as well as interpolymer complexation.

• Journal of Pharmaceutical Investigation
• /
• 제21권3호
• /
• pp.149-153
• /
• 1991

Polyethylene oxide (PEO)-polymethacrylic acid (PMAA) interpenetrating polymer networks (IPN) were synthesized via radical polymerization of PMAA and simultaneous crosslinking of PEO using triisocyanate. The equilibrium swelling of PEO-PMAA IPN was determined at different pHs. The swelling of PEO-PMAA IPN, ranged from 20% to 90%, was more sensitive than that of homo polymer PMAA gel This is probably due to protonation and deprotonation of the PMAA network and interpolymer complex formation between PEO and PMAA. Several model drugs were loaded into the IPN matrices and the release mechanisms were investigated. The release of nonionizable drugs such as ftorafur and prednisolone was controlled by swelling of the matrices. However, he release of propranolol, positively charged drug, was more affected by the ionic interaction between the drug and PMAA newtork, and the interpolymer complexation.

• Macromolecular Research
• /
• 제10권5호
• /
• pp.273-277
• /
• 2002

Ultra-thin polymer films containing cobalt(II) meso-tetraphenylporphyrin(CoTPP) have been prepared by vacuum codeposition of the metal complex and trans-2-butene as an organic monomer using an inductively coupled RF glow discharge operating at 7-9 Watts. The polymer films were characterized by sorption measurements. Sorption data obtained for polymer films containing CoTPP indicate that the CoTPP molecules are capable of reversibly binding oxygen molecules. It was found that the adjacent CoTPP molecules in the aggregated metal complex phase could irreversibly share the oxygen molecules. A dispersion of the metal complex molecules in the polymer matrix was made to maintain the reversible reactivity of the metal complex molecules with oxygen in the polymer films via vacuum evaporation process. The Henry mode solubility constant, the Langmuir mode capacity constant, the amount of binding oxygen, and the dissociation equilibrium in the dual mode sorption theory were discussed.

• KSBB Journal
• /
• 제20권3호
• /
• pp.133-141
• /
• 2005

This review presents the preparation, transport mechanism and application of molecularly imprinted membranes (MIM). Molecular imprinting has now been established as a technique which allows the creation of tailor-made binding sites for many classes of compounds. MIM have some advantages; a high capacity due to a large surface area, faster transport of substrate molecules and faster equilibrium of binding cavities compared to molecularly imprinted particles. MIM were prepared by covalent and non-covalent chemical bonding systems, by interactions between functional monomer and template. MIM can be prepared by in-situ polymerization, wet phase inversion, dry phase inversion, and surface imprinting method. MIM can continuously separate mixtures based on facilitated or retarded diffusion of the template. MIM can change their permeability in the presence of templates. MIM have a potential to be used to separate chiral compounds and materials with similar structures. However the application of MIM by the chemical industries is still in its infancy stages.

• Transactions on Electrical and Electronic Materials
• /
• 제10권1호
• /
• pp.9-15
• /
• 2009

There is a growing demand for a high voltage silicone rubber composite with high mechanical property and high electrical property. The effect of modified cross-linking agent on the mechanical, electrical properties, and short-circuit test performance of silicone rubber insulators have been investigated. To use base polymer, the various silicone polymers were prepared by the equilibrium polymerization. Aluminum trihydrate surface was treated by vinyl silane. Liquid silicone rubber nanocomposite was prepared from the compounding of VPMPS, HPDMS, catalyst, and alumina trihydrate modified with 1,3,5-trivinyl-l,3,5-trimethylcyclotrisiloxane. The mechanical property and electrical property for insulation materials were measured, indicating the high tensile strength and the good short-circuit property.

• Fibers and Polymers
• /
• 제1권2호
• /
• pp.67-70
• /
• 2000

Rosin maleic anhydride adduct (RMA)-bisester was prepared by the esterification of chlorinated RMA with hydroquinone. Phenylpyridinylcyclot.isiloxane ($D_3^{Ph,Py}$) was synthesized from phenylpyridinyldichlorosilane in the presence of zinc oxide catalyst, and amino group terminated polyphenylpyridinylsiloxane prepolymer was prepared by equilibrium polymerization of $D_3^{Ph,Py}$ with 1,3-bis(3-aminopropyl)-1,1,3,3-tetramethyldisiloxane. Rosinimide (PSMR) was prepared from the imidization of RMA-bisester with polyphenylpyridinylsiloxane prepolymer at 12$0^{\circ}C$ for 7 h using ${\gamma}$-butyrolactone/pyridine. It showed that PSMR had better thermal stalbility than rosinimide modified with polydimethylsiloxane.