• Korean Chemical Engineering Research
• /
• v.55 no.2
• /
• pp.230-236
• /
• 2017

Solubility data of carbon dioxide ($CO_2$) in poly(ethylene glycol) dimethyl ether (PEGDME) are presented at pressures up to about 50 bar and at temperatures between 303 K and 343 K. The solubilities of $CO_2$ were determined by measuring the bubble point pressures of the $CO_2+PEGDME$ mixtures with various compositions using a high-pressure equilibrium apparatus equipped with a variable-volume view cell. To observe the effect of the PEGDME molecular weight on the $CO_2$ solubility, the $CO_2$ solubilities in PEGDME with two kinds of molecular weight were compared. As the equilibrium pressure increased, the $CO_2$ solubility in PEGDME increased. On the other hand, the $CO_2$ solubility decreased with increasing temperature. When compared at the same temperature and pressure, the PEGDME with a higher molecular weight gave smaller $CO_2$ solubility on a mass fraction and molality basis, but gave greater $CO_2$ solubilities on a mole fraction basis.

• Polymer(Korea)
• /
• v.26 no.5
• /
• pp.661-669
• /
• 2002

The purpose of this research is to absorb and remove sulfur dioxide existing in the air by using ion exchange non-woven fabric. So we found out very appropriate condition of anionic exchange fabric scrubber by measuring amount of SO$_2$ adsorption under the atmosphere that concentration, velocity, and humidity was 100∼200 ppm, 0.6∼1.0 m/sec, and 30∼90 RH%, respectively. Ion exchange capacity of ion exchanger showed the maximum value, 3.75 meq/g at pH 4, and adsorption equilibrium time was the maximum value, 30 h when gas velocity was 0.6 m/sec, moreover, at 80$\^{C}$, adsorption equilibrium time tended to decrease more than 10 h. When concentration was 200 ppm, while reaction speed between SO$_2$ and ligand of fibrous ion exchanger was getting faster, adsorption break point had a tendency to get faster as well. In addition, when relative humidity in the scrubber was 90%, adsorption efficiency was 7.6%/h that seemed to be 30% higher than 4.6%/h coming from the condition that relative humidity had been 30%, and it was totally absorbed under 5 wt% NaOH solution in 5 minutes.

• International Area Studies Review
• /
• v.22 no.3
• /
• pp.201-219
• /
• 2018

This paper suggested a theoretical model, in which a security-based(secured loan, non-secured loan) credit agreement determines the form of corporate cost function through a loaning company's cost minimization in the light of a company which behaves monopolistically in product markets. Also, this paper analyzed the influence of a corporate credit agreement on market equilibrium, and economic welfare in product markets. As a result, it was found that in case a company, whose equity capital is small, implements borrowing based on a secured loan from a financial institution, the company comes to face borrowing restraints, in which the company has no choice but to get a loan within the scope of securities. When a company offers its capital goods, i.e. a production factor, as a security, there occurs a distortion to the production factor input ratio. Meanwhile, when a company comes to get a loan based on an unsecured loan, for which the interest rate is high, marginal cost rises; accordingly, the company comes to choose a credit agreement aiming at maximizing its profits. However, a company's choice of a credit agreement is not quite desirable from a consumer's viewpoint, and from the whole economic point of view; overall, such a choice is likely to aggravate economic welfare.

• Asia-Pacific Journal of Business
• /
• v.13 no.2
• /
• pp.155-168
• /
• 2022

Purpose - Although the government and civic groups do not always confront each other over the Me Too movement, the two stakeholders are often conflicted. For example, the two interested parties may have different positions in the gender conflict and be often hostile due to debates over how to institutionalize and distinguish actual harm from innocence. In this situation, the strategies of the two stakeholders for their own ends are inevitably interdependent. This paper is a study on the strategic reciprocity of interested parties in relation to the Me Too Movement, which has recently raised a new discourses in our society. Design/methodology/approach - We derive equilibrium of the reciprocity between civic groups(collectively referred to as the Me Too Movement Headquarters) leading the Me Too Movement and government that must preemptively respond to new social issues, and analyze how changes in some external conditions affect the reactions of the two stakeholders. For this purpose we rely on economic methodology. Findings - In the reciprocity between the two forces, we derive an equilibrium composed of the pair of the government's optimal response level and the civic group's optimal strategy, and further derive the comparative static results according to changes in external conditions. Analysis results are mixed with intuitive results and non-intuitive ones. However, even if the result is not intuitive, rational reasoning is possible as long as it is derived through a rigorous model, and it has several implications. Research implications or Originality - Although this study is a positive approach, it is meaningful as a starting point to explore practical discussion directions and alternatives by adding another new perspective and approach to research in other social science fields with many normative studies.

• Korean Journal of Social Welfare Studies
• /
• v.40 no.2
• /
• pp.89-122
• /
• 2009

This study was carried out to analyze the job of care managers in their social welfare practicing fields about the frequency of care management duties they perform, types of duties considered to be most important and the reason, and types of jobs counted to be the most difficult and the reason by qualitative case study research methods. The job area of care management was elicited using DACUM method, and those 9 job areas derived from it were analysed according to frequency of performance, importance and difficulty. The subjects were 10 social workers serving more than 3 years with major duty of care management and chosen by reputational-case selection, and those collected data analysis was operated according to embedded analysis types. We discussed the implication of this research. : The experience of participants are the process of maintaining the tension, and search the equilibrium point between client centered service and institutional pressure. According to the results we proposed ① Construction of community based social work network, ② Institutional installation for guarantee care manager's Job competence ③ Standard manual for equilibrium and upward equalization

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.163-163
• /
• 2000

In this research, we used the ion irradiation technique which has an advantae in improving intentionally the properties of surface and interface in a non-equilibrium, instead of the conventional annealing method which has been known to improve the material properties in the equilibrium stat. Cu/Co multilayered films were prepared on SiN4/SiO2/Si substrates by the electron-beam evaporation for the Co layers and the thermal evaporation for the Cu layers in a high vacuum. The ion irradiation with a 80keV Ar+ was carried out at various ion doses in a high vacuum. Hysteresis loops of the films were investigated by magneto-optical polar Kerr spectroscopy at various experimental conditions. The change of atomic structure of the films before and after the ion irradiation was studied by glancing angle x-ray diffraction, and the intermixing between Co and Cu sublayers was confirmed by Rutherford backscattering spectroscopy. The surface roughness and magneto-resistance were measured by atomic force microscopy and with a four-point probe system, respectively. During the magneto-resistance measurement, we changed temperature and the direction of magnetization. From the results of experiments, we found that the change at the interfaces of the Cu/Co multilayered film induced by ion irradiation cause the change of magnetic properties. According to the change in hysteresis loop, the surface inplane component of magnetic easy axis was isotropic before the ion irradiation, but became anisotropic upon irradiation. It was confirmed that this change influences the axial behavior of magneto-resistance. Especially, the magneto-resistance varied in accordance with an external magnetic field and the direction of current, which means that magneto-resistance also shows the uniaxial behavior.

• Journal of Korea Trade
• /
• v.27 no.5
• /
• pp.137-152
• /
• 2023

Purpose - Although many existing studies on the US-China hegemonic conflict and decoupling have been published, most of them are qualitative and use descriptive analysis methods. Papers that quantitatively analyzed decoupling mainly estimate the effect of a tariff increase. However, this paper quantitatively analyzed the ripple effect by focusing on decoupling technology spillover between the United States and China. And, for the first time, it was suggested that the blocking of technology spillover could give a fatal blow to the East Asian economy as well as China. Design/methodology - The United States is pursuing decoupling with China, primarily in goods trade and blocking technology transfer. This paper sets up various scenarios and uses three computational general equilibrium (CGE) models to analyze the overall ripple effects of decoupling. A paper using the three CGE models for decoupling ripple effect analysis has not yet been published. Findings - Decoupling will hit the economies of regions with close economic ties to China more than others. According to simulation results of this study, the Chinese economy may suffer severe damage that is difficult to recover from, and the economies of Asian countries are predicted to deteriorate to the point of being choked. Originality/value - Existing papers that assessed the effect of decoupling mostly focus on estimating the effect itself through tariff hikes. This paper is meaningful in that it comprehensively analyzed decoupling by adding the effect of technology spillover blockade. In addition, another meaning can be found in that it quantified for the first time that it will deal a huge blow to the extent of choking the East Asian economy as well as China.

• Smart Structures and Systems
• /
• v.33 no.1
• /
• pp.1-16
• /
• 2024

The investigation on vehicle-bridge coupling system (VBCS) is crucial in bridge design, bridge condition evaluation, and vehicle overload control. A real-time hybrid testing (RTHT) method for VBCS (RTHT-VBCS) is proposed in this paper for accurately and economically disclosing the dynamic performance of VBCSs. In the proposed method, one of the carriages is chosen as the experimental substructure loaded by servo-hydraulic actuator loading system in the laboratory, and the remaining carriages as well as the bridge structure are chosen as the numerical substructure numerically simulated in one computer. The numerical substructure and the experimental substructure are synchronized at their coupling points in terms of force equilibrium and deformation compatibility. Compared to the traditional iteration experimental method and the numerical simulation method, the proposed RTHT-VBCS method could not only obtain the dynamic response of VBCS, but also economically analyze various working conditions. Firstly, the theory of RTHT-VBCS is proposed. Secondly, numerical models of VBCS for RTHT method are presented. Finally, the feasibility and accuracy of the RTHT-VBCS are preliminarily validated by real-time hybrid simulations (RTHSs). It is shown that, the proposed RTHT-VBCS is feasible and shows great advantages over the traditional methods, and the proposed models can effectively represent the VBCS for RTHT method in terms of the force equilibrium and deformation compatibility at the coupling point. It is shown that the results of the single-degree-of-freedom model and the train vehicle model are match well with the referenced results. The RTHS results preliminarily prove the effectiveness and accuracy of the proposed RTHT-VBCS.

• Structural Engineering and Mechanics
• /
• v.90 no.2
• /
• pp.159-175
• /
• 2024

In order to solve the problem of calculating the reasonable completed bridge state of a self-anchored hybrid cable-stayed suspension bridge (SA-HCSB), this paper proposes an analytical method. This method simplifies the main beam into a continuous beam with multi-point rigid supports and solves the support reaction forces. According to the segmented catenary theory, it simultaneously solves the horizontal forces of the main span main cables and the stay cables and iteratively calculates the equilibrium force system on the main beam in the collaborative system bridge state while completing the shape finding of the main span main cable and stay cables. Then, the horizontal forces of the side span main cables and stay cables are obtained based on the balance of horizontal forces on the bridge towers, and the shape finding of the side spans are completed according to the segmented catenary theory. Next, the difference between the support reaction forces of the continuous beam with multiple rigid supports obtained from the initial and final iterations is used to calculate the load of ballast on the side span main beam. Finally, the axial forces and strains of each segment of the main beam and bridge tower are obtained based on the loads applied by the main cable and stay cables on the main beam and bridge tower, thereby obtaining analytical data for the bridge in the reasonable completed state. In this paper, the rationality and effectiveness of this analytical method are verified through a case study of a SA-HCSB with a main span of 720m in finite element analysis. At the same time, it is also verified that the equilibrium force of the main beam under the reasonably completed bridge state can be obtained through iterative calculation. The analytical algorithm in this paper has clear physical significance, strong applicability, and high accuracy of calculation results, enriching the shape-finding method of this bridge type.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.1
• /
• pp.167-173
• /
• 2014

The embedded suction anchor, ESA, is one type of mooring anchor systems which utilizes the suction pile or caisson to penetrate the anchor into the sea bed and develops its capacity under pullout load. In this study, the numerical analysis using ALE (Arbitrary Lagrangian Eulerian) Adaptive Meshing technique was performed to simulate the pullout behavior of the ESA, and the results were compared to those of the previous research, centrifuge model tests and the analytical method based on limit equilibrium theory. The pullout behaviors of the ESA under horizontal, vertical, and inclined loading were evaluated. The analysis results showed that the maximum horizontal pullout load was developed when the location of loading point was at the mid-point, and the each vertical pullout load gave the similar value regardless of the locations of the loading points. The pullout load decreased as the load inclination angle increased at the mid-point of the anchor.