• 드라이브 ㆍ 컨트롤
• /
• 제11권4호
• /
• pp.15-24
• /
• 2014

It is difficult to analytically derive a volumetric displacement formula for a gerotor hydraulic motor due to the complexity of the geometric shape of its gear lobes. This work proposes an analytical method for the volumetric displacement, a relatively easy method based upon two physical concepts: conservation between hydraulic energy and mechanical shaft energy, and torque equilibrium for the rotor's motion. The first research using these concepts was conducted on inner and outer rotors rotating with respect to each rotor axis. This work represents the second report conducted on an inner rotor revolving as a planetary motion on the stationary outer rotor. The formula equations regarding the volumetric displacement and flow rate are derived, and the proposed formula about the volumetric displacement is proven to be the same as another analytical displacement formula: the so-called vane length method. From the formula, volumetric displacement is calculated for an example geometry of the gear lobes. The resultant displacement is confirmed to be the same as the value calculated from the chamber volume method. The proposed analytical formula can be utilized in the analysis and design of gerotor hydraulic motors. Because it is based on torque equilibrium, this formula can provide a better understanding of torque performance, such as torque ripple, in designing a gerotor type motor.

• Korean Chemical Engineering Research
• /
• 제45권3호
• /
• pp.219-225
• /
• 2007

비이온 계면활성제 $C_{12}E_8$ 수용액의 탄화수소 오일에 대한 가용화도(equilibrium solubilization capacity)를 $30^{\circ}C$에서 기체 크로마토그래피(GC)를 이용하여 측정하였다. 탄화수소 오일의 가용화도를 실험에 사용한 계면활성제의 농도로 나눈 값으로 표시한 molar solubilization ratio(MSR)는 순수한 단일 성분의 탄화수소 오일 경우, 탄화수소 오일의 탄소수(ACN)가 증가함에 따라 거의 선형적으로 감소함을 알 수 있었다. 한편 탄화수소 오일의 이성분 시스템은 사용한 두 탄화수소 오일의 탄소수(alkane carbon number, ACN) 차이에 따라 선택적 가용화 혹은 비선택적 가용화 경향을 나타내었다. 본 연구에서 가용화도 실험을 수행한 n-octane/n-nonane과 n-nonane/n-decane 혼합물 시스템의 경우, 비선택적 (non-selective) 가용화 경향을 나타내었으며, 반면에 n-octane/n-decane 혼합물 시스템의 경우에는 선택적(selective) 가용화 경향을 따르는 것을 GC 분석 결과로부터 확인할 수 있었다.

• 한국터널지하공간학회 논문집
• /
• 제2권3호
• /
• pp.47-57
• /
• 2000

터널의 파괴는 사면의 경우처럼 파괴면의 형상을 사전에 가정하기 어렵기 때문에 한계평형법에 기초한 해석법을 적용하여 안전율을 구하기가 곤란하다. 본 연구에서는 이러한 문제를 극복하기 위하여 강도감소기법을 이용한 수치해석기법에 의해 터널의 안전율을 구하는 방법을 제시하였다. 균질한 암반에 굴착된 원형터널을 가정하여 무보강, 부분보강 및 인버트의 완전한 폐합의 경우에 대하여 안전율을 계산하였으며, 요소망의 크기에 따른 민감도 분석을 위해 크기가 다른 3가지의 요소망을 사용하여 계산 결과를 비교하였다. 제안된 방법의 검증을 위해, 특정한 파괴 활동면을 갖는 경우에 대해 한계평형해석을 수행하여 수치해석 결과와 비교하였다. 본 논문에서 제안한 터널의 안전율 계산 방법은 터널의 형상이나 암반의 상태에 관계없이 적용될 수 있으므로 향후 터널 설계 및 안정성 평가에 큰 도움이 될 수 있을 것으로 생각된다.

• 한국지반환경공학회 논문집
• /
• 제25권4호
• /
• pp.29-35
• /
• 2024

본 연구는 강봉앵커의 프리스트레스 도입 전 수동저항 효과를 확인하기 위한 해석적 연구이다. 영구앵커로 강봉을 사용하는 경우 두부 하중 재하 전에도 비탈면 내 변위 발생 시 강봉, 그라우트, 주변 지반사이 상호작용에 따른 수동저항효과로 변위가 억제된다. 이에 실제 강봉앵커가 적용된 현장을 대상으로 한계평형해석 및 유한요소해석을 이용하여 파괴면의 형상 및 안전율 변화를 검토하였다. 검토결과, 강봉앵커가 보강된 비탈면의 안전율은 유한요소해석결과 2.02이며, 한계평형해석결과 2.14에 비해 약 5.9% 작게 발생하였고 활동면의 위치도 더 깊게 발생하였다. 이는 보강 전 비탈면에 비해 안전율이 한계평형해석은 163%, 유한요소법은 153% 증가된 것이다. 또한, 최대발생 변위는 비탈면 내 하부 무보강구간에서 발생하였으며, 강봉앵커가 설치된 위치에서는 변위가 42~83% 감소되는 것으로 나타났다.

• 한국경영과학회지
• /
• 제27권1호
• /
• pp.19-32
• /
• 2002

This paper examines the effect of the producer-supplier quality contract parameters and the magnitude of the quality related variables on the quality of the final products. Our analysis focuses on the parties' equilibrium behavior In a quality game environment where the supplier should choose among the two production technologies, one requiring high cost but producing high quality Parts and the other requiring low cost but producing low quality parts and where the producer should decide whether to do the inspection of the parts. The game framework is employed to depict the potential conflicts existing between the Producer and the supplier because the Producer can not observe the supplier's choice and each party wants the other to bear the cost of producing high quality products. In our model, we specifically consider the competitive situation where the producer competes with a firm producing the same product. We employ the market share attraction model to Incorporate the competitive situation and completely characterize the equilibrium by using the Nash equilibrium concept for the game solution. Our results show that the equilibrium depends on the contract terms and the magnitude of the quality related variables. Compared to the non-competitive situation, the probability of producer's Inspection and the probability of supplier's choosing the high quality technology increases in a competitive situation. This is true even when the competitor's quality is lower than the producer's lowest. As a result, the quality of the final product increases In a competitive situation. And as the failure cost borne by the supplier increases, the probability of choosing the high quality technology Increases and the probability of inspection decreases. The net effect of this results in the decrease of the final product quality.

• 한국대기환경학회지
• /
• 제6권1호
• /
• pp.85-96
• /
• 1990

Simultaneous removal efficiencies of hydrophilic and hydrophobic gaseous pollutants are experimentally determined, and the macroscopic removal mechanism of pollutants in a dry scrubber is analyzed using the extended model of three phase equilibrium distribution of pollutant at high temperatures that can describe the different morphological conditions of adsorbent and water at varying relative humidities. For the simplicity, the inside of spray dryer is divided into three regions of ; (1) absorption, (2) three-phase equilibrium, and (3) adsorption, and the removal efficiencies of each pollutants at three regions are observed at different experimental conditions to estimate the effects of important parameters of dry scrubber. The laboratory experiments simulate the three regions of spray dryer with the temperature control and thus evaporation rate of water from the slurry particle. $SO_2$ as a hydrophilic gaseous pollutant and vinyl chloride as a hydrophobic toxic gas are selected for the future field application to soid waste incineration, and the two types of slurry are made of the two sorbents ; 10 wt.% $Ca(OH)_2$, and 10 wt.% NaOH. Result of temperature effect shows the height of absorption plus three-phase region is decreased as the operation temperature is increased, which results in the lower removal efficiency of $SO_2$ but higher removal for vinyl chloride in the adsorption region of dry scrubber. The removal efficiency of $SO_2$ is higher by NaOH slurry than by $Ca(OH)_2$ slurry due to the hygroscopic nature of NaOH, while the removal of vinyl chloride is higher in $Ca(OH)_2$ case. From the analysis of redults using three-phase equilibrium distribution model, the effective two-phase partition coefficients can be obtained, and the possible extention in the application of the three-phase equilibrium model in a dry scrubber design has been demonstrated.

• 자원환경지질
• /
• 제33권1호
• /
• pp.77-88
• /
• 2000

The goal of this study is to assess the spatial distribution of natural slopes and cutting slopes under would-be development. For this goal, a quantitative slope stability analysis method using GIS integrated with a computer program was developed. Through field investigations, the discontinuity parameters were collected such as orientation of discontinuity, persistence, spacing, JRC, JCS, and water depth. The distributions were interpolated from the ordinary kriging method in ARC/INFO GIS after variogram analysis. The layers showing all parameters needed for limit equilibrium analysis were constructed. The final layer using GIS works composed of 162,352 polygons, that is, unit slopes. The rock slope stability analysis program was coded by C++ language. This program can calculate geometrical vectors related to rock block failures using input orientation data and direction and dimension of strength to occur failure. Also, this can calculate shear strength of joints through empirical equations and quantitative factors of safety. This methodology was applied to the study area which is located in Jaecheon city and Danyang-gun of the northeastern Keumsu is about 135$km^2$. As a result, the study area was entirely stable but unstable, that is, factor of safety less than 1.0dominantly at the slopes near Keumsil, Daejangri, Keumsungmyun and Sojugol, Mt. Dongsan, Juksongmyun by the natural slope stability analysis. Assuming the cutting slope showing the same direction immediate, and quantitative analysis of factors of safety for a regional area could be conducted through GIS integrated with a computer program of limit equilibrium.

• 한국지반공학회논문집
• /
• 제19권5호
• /
• pp.163-173
• /
• 2003

본 연구에서는 억지말뚝으로 보강된 사면에서 한계평형 해석법과 3차원 해석 결과를 비교 분석하였다. 특히, 유한차분법을 이용한 FLAC 3D를 바탕으로 하는 커플링 해석에 주안점을 두었으며, FLAC을 이용하여 전단강도감소기법에 따른 보강사면의 안전율을 계산하기 위해 FLAC의 내장언어인 FISH를 이용하여 작성하였다. 커플링 해석에서 억지말뚝에 의한 안정화된 사면을 해석하기 위해 말뚝의 거동과 사면안정을 동시에 고려하였다. 따라서 본 연구에서는 이 두 방법을 적용하여 일렬 억지말뚝이 사면선단, 중앙부, 정부에 위치할 경우에 있어서 각각의 활동 파괴면 및 안전율을 비교 분석하였으며 강도정수 감소법을 적용한 해석기법의 적용성과 타당성에 대한 분석을 수행하였다.

• Nuclear Engineering and Technology
• /
• 제54권12호
• /
• pp.4571-4584
• /
• 2022

The analysis of rapid flow transients in Reactor Coolant Pumps (RCP) is essential for a reactor safety study. An accurate and precise analysis of the RCP coastdown is necessary for the reactor design. The coastdown of RCP affects the coolant temperature and the colloidal crud in the primary coolant. A realistic and kinetic model has been used to investigate the behavior of activated colloidal crud in the primary coolant and steam generator that solves the pump speed analytically. The analytic solution of the non-dimensional flow rate has been determined by the energy ratio β. The kinetic energy of the coolant fluid and the kinetic energy stored in the rotating parts of a pump are two essential parameters in the form of β. Under normal operation, the pump's speed and moment of inertia are constant. However, in a coastdown situation, kinetic damping in the interval has been implemented. A dynamic model ACCP-SMART has been developed for System Integrated Modular and Advanced Reactor (SMART) to investigate the corrosion due to activated colloidal crud. The Fickian diffusion model has been implemented as the reference corrosion model for the constituent component of the primary loop of the SMART reactor. The activated colloidal crud activity in the primary coolant and steam generator of the SMART reactor has been studied for different equilibrium corrosion rates, linear increase in corrosion rate, and dynamic RCP coastdown situation energy ratio b. The coolant specific activity of SMART reactor equilibrium corrosion (4.0 mg s^-1) has been found 9.63×10^-3 µCi cm^-3, 3.53×10^-3 µC cm^-3, 2.39×10^-2 µC cm^-3, 8.10×10^-3 µC cm^-3, 6.77× 10^-3 µC cm^-3, 4.95×10^-4 µC cm^-3, 1.19×10^-3 µC cm^-3, and 7.87×10^-4 µC cm^-3 for ²⁴Na, ⁵⁴Mn, ⁵⁶Mn, ⁵⁹Fe, ⁵⁸Co, ⁶⁰Co, ⁹⁹Mo, and ⁵¹Cr which are 14.95%, 5.48%, 37.08%, 12.57%, 10.51%, 0.77%, 18.50%, and 0.12% respectively. For linear and exponential coastdown with a constant corrosion rate, the total coolant and steam generator activity approaches a higher saturation value than the normal values. The coolant and steam generator activity changes considerably with kinetic corrosion rate, equilibrium corrosion, growth of corrosion rate (ΔC/Δt), and RCP coastdown situations. The effect of the RCP coastdown on the specific activity of the steam generators is smeared by linearly rising corrosion rates, equilibrium corrosion, and rapid coasting down of the RCP. However, the time taken to reach the saturation activity is also influenced by the slope of corrosion rate, coastdown situation, equilibrium corrosion rate, and energy ratio β.

• 한국전산구조공학회논문집
• /
• 제26권2호
• /
• pp.147-155
• /
• 2013

본 논문에서는 도심지 지하에 터널 전력구를 건설하는 경우 시공단계별 영향을 고려한 구조해석을 수행하였다. 해석대상의 도심지 지하에는 여러 종류의 다양한 라이프라인 구조체가 설치되어 있다. 터널전력구의 구조해석에는 지반체의 유한요소해석 프로그램인 MPDAP을 사용하였다. 라이프라인 구조체와 터널 전력구 사이의 이격거리가 가장 작은 대표적인 3개의 단면에 대하여 구조해석을 수행하였다. 터널의 굴착단계별 유한요소해석에서 발생되는 평형불균형성 문제는 평형섭동개념을 적용하여 해결하였다. 또한 터널 굴착에 의한 시간의존 변형의 영향은 하중분담율을 사용하여 시공단계별로 고려하였다. 본 연구에서 검토한 3개의 대표단면에서는 터널 전력구 주변 지반체에서 발생하는 최대변위값은 허용변위값이내를 보여주었다.