• Korean Journal of Food Science and Technology
• /
• v.25 no.1
• /
• pp.39-45
• /
• 1993

The effects of enzymatic modification with pepsin and actinidin was studied on molecular weight distributions and functional properties of hydrolysates from soy protein isolate (SPI) differing in degree of hydrolysis. The hydrolyzed SPI by pepsin showed 41.5% degree of hydrolysis after 5 min, and maximum hydrolysis was obtained after 2 hours. Actinidin hydrolyzed SPI 26.71% degree after 1 hour. On SDS-PAGE, native SPI showed 9 distinguishable bands on SDS-PAGE gel. Pepsin treated SPI showed one broad band in the lower part of gel. This band was shifted further to the bottom of the gel and became faint as hydrolysis time increased. While actinidin treated SPI showed different SDS-PAGE pattern from pepsin. However PAGE patterns were similar with pepsin and actinidin treated groups. With pepsin treatment, solubility of SPI distinctively increased around isoelectric point(pI). Emulsifying activity (EA) and emulsifying stability (ES) showed marked increase over pH range of $3.0{\sim}8.0$. 5 min modified group had most excellent foam expansion (FE). Foam stability (FS) was increased as pepsin treatment time increased at pI. With actinidin treatment, solubility was increased. 60 min modified SPI had the most effective EA at pH 4.5. However ES was not effected by actinidin treatment. 5 min modified group was most effect in FE. FS was higher at alkaline pH.

• Korean Journal of Food Science and Technology
• /
• v.40 no.3
• /
• pp.290-296
• /
• 2008

This study examined the physicochemical properties of chemically and enzymatically cross-modified waxy rice starches. The waxy rice starch was cross-linked using phosphorous oxychloride, and then partially hydrolyzed with four commercial ${\alpha}$-amylases (Fungamyl, Termamyl, Liquozyme, Kleistase). Swelling power and the moisture sorption isotherm did not change with cross-modification. Two cross-modified waxy rice starches (hydrolyzed with Termamyl and Liquozyme) showed higher solubilities than native starch and the two other cross-modified starches (hydrolyzed with Fungamyl and Kleistase). In terms of RVA characteristics, the two cross-modified waxy rice starches hydrolyzed with Termamyl and Liquozyme, respectively, had lower peak viscosity, holding strength, and final viscosity than the native starch. However, the two starches hydrolyzed with Fungamyl and Kleistase, respectively, revealed higher peak viscosity, holding strength, and final viscosity than the native starch. No differences were displayed in the X-ray diffraction patterns and DSC thermal characteristics of the cross-modified waxy rice starch as compared to both the native and cross-linked starches, indicating that cross-linking and enzymatic hydrolysis occurred in the amorphous region and did not alter the crystalline region.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.12
• /
• pp.1636-1643
• /
• 2012

Enzymatic pre-bleaching by modification of pulp fibers with xylanases is an attractive approach to reduce the consumption of toxic bleaching chemicals in the paper industry. In this study, an alkaliphilic endoxylanase gene was isolated from metagenomic DNA of a structurally stable thermophilic lignocellulose-degrading microbial consortium using amplification with conserved glycosyl hydrolase family 10 primers and subsequent genome walking. The full-length xylanase showed 78% sequence identity to an endo-${\beta}$-1,4-xylanase of Clostridium phytofermentans and was expressed in a mature form with an N-terminal His6 tag fusion in Escherichia coli. The recombinant xylanase Xyn3F was thermotolerant and alkaliphilic, working optimally at $65-70^{\circ}C$ with an optimal pH at 9-10 and retaining >80% activity at pH 9, $60^{\circ}C$ for 1 h. Xyn3F showed a $V_{max}$ of 2,327 IU/mg and $K_m$ of 3.5 mg/ml on birchwood xylan. Pre-bleaching of industrial eucalyptus pulp with no prior pH adjustment (pH 9) using Xyn3F at 50 IU/g dried pulp led to 4.5-5.1% increase in final pulp brightness and 90.4-102.4% increase in whiteness after a single-step hypochlorite bleaching over the untreated pulp, which allowed at least 20% decrease in hypochlorite consumption to achieve the same final bleaching indices. The alkaliphilic xylanase is promising for application in an environmentally friendly bleaching step of kraft and soda pulps with no requirement for pH adjustment, leading to improved economic feasibility of the process.

• Food Science and Biotechnology
• /
• v.17 no.5
• /
• pp.1092-1096
• /
• 2008

Commercial food products from major cities of Coahuila, Mexico were screened to identify residues of transgenic deoxyribonucleic acid (DNA) and/or proteins. After performed, an inventory on all products that contained a soybean-based ingredient in a commercial grocery store in the city of Saltillo, Coahuila, Mexico, 245 food products were identified and grouped in 15 classes according to the soybean ingredient as well as the manufacturing process used for their elaboration. Similar sampling was made for the different food classes in the cities of Monclova, Piedras Negras, and Torreon. A total of 88 samples were analyzed and DNA was extracted by the hexadecyltrimethyl-ammonium bromide (CTAB) technique with slight modification to obtain better DNA quality (1). In addition, segments of the transgenic genes one that codifies for 5-enolpyruvylshikimate-3-phosphate synthase (epsps), cry 1A, and the cauliflower mosaic virus (CaMV) promoter were amplified using polymerase chain reaction (PCR). The transgenic proteins 5-enolpyruvylshikimate-3-phosphate synthase (CP4 EPSPS) and insecticidal crystal protein (Cry 1Ab/Ac) were identified using double antibody sandwich-enzymatic linked immunoassay analysis (DAS-ELISA). Presence of transgenic genes and/or proteins was identified in 35.3% of the commercial products samples.

• Preventive Nutrition and Food Science
• /
• v.15 no.1
• /
• pp.57-66
• /
• 2010

Passion fruit fiber pectin gels represent a new alternative pectin source with potential for food and non-food applications on a commercial scale. Pectic polysaccharides were extracted from passion fruit (Passiflora edulis) fiber using citric acid as a clean catalyst and autoclaved for 20 to 60 min at $121^{\circ}C$. The best condition of pectin yield with the highest molecular weight was obtained with 1.0% of citric acid (250 mg/g dry passion fruit fiber pectin) for 20 min of autoclaving. Spectroscopic analyses by Fourier transform infrared, enzymatic degradation reactions, and ion-exchange chromatography assays showed that passion fruit pectin extracted for 20 min was homogeneous high methoxylated pectin (70%). Gel permeation analysis confirmed that the pectin extract obtained by autoclaving by 20 min showed higher molecular weights than those autoclaved for 40 and 60 min. Passion fruit pectin extracted for 20 min was enzymatically modified with fungal pectinmethylesterase to create restructured gels. Short autoclave treatment (20 min) with citric acid as extractant resulted in a significant increase of gel strength, improving pectin extraction in terms of functionality. The treatment of solubilized material (pectic polysaccharides) in the presence of insoluble material (cellulose and hemicellulose) with pectinmethylesterase and calcium led to the creation of a stiffer passion fruit fiber pectin gel, while syneresis was not observed.

• Applied Biological Chemistry
• /
• v.30 no.3
• /
• pp.234-241
• /
• 1987

Conditions necessary for optimal plastein productivity from sardine protein hydrolysate using papain and pepsin were established. Sardine protein concentrate was hydrolyzed with pepsin yielding an approximate degree of hydrolysis of 77.2%. Enzyme induced plastein was optimized at: pH 6 for papain and pH 4 for pepsin; substrate concentrate, 50%(w/v) for papain and 40%(w/v) for pepsin; time of incubation, 24hr; enzyme/substrate ratio, 1 : 100(w/w). Plastein yields of 49.5% and 45.3% were found for papain and pepsin, respectively, when 10% trichloroacetic acid (TCA) was used as the precipitating agent. However, when plastein was precipitated by 50% ethanol, the yield was found to be 43.6% and 41.0% for papain and pepsin, respectively. Ethanol-precipitated plastein did not contain lipid and contained approximately 1.3% ash and 91.0% protein. In comparison, the TCA-precipitated plastein contained 74.2% protein, 0.5% lipid and 15.3% ash.

• Journal of Microbiology and Biotechnology
• /
• v.28 no.9
• /
• pp.1482-1492
• /
• 2018

Fusarium oxysporum trypsin (FOT) is a fungal serine protease similar to mammal trypsin. The FOT could be successfully expressed in Pichiapastoris by engineering the natural propeptide APQEIPN. In this study, we constructed two recombinant enzymes with engineered amino acid sequences added to the N-terminus of FOT and expressed in P. pastoris. The N-terminal residues had various effects on the structural and functional properties of trypsin. The FOT, and the recombinants TE (with peptide YVEF) and TS (with peptide YV) displayed the same optimum temperature ($40^{\circ}C$) and pH (8.0). However, the combinants TE and TS showed significantly increased thermal stability at $40^{\circ}C$ and $50^{\circ}C$. Moreover, the combinants TE and TS also showed enhanced tolerance of alkaline pH conditions. Compared with those of wild-type FOT, the intramolecular hydrogen bonds and the cation ${\pi}$-interactions of the recombinants TE and TS were significantly increased. The recombinants TE and TS also had significantly increased catalytic efficiencies (referring to the specificity constant, $k_{cat}/K_m$), 1.75-fold and 1.23-fold than wild-type FOT. In silico modeling analysis uncovered that the introduction of the peptides YVEF and YV resulted in shorter distances between the substrate binding pocket (D174, G198, and G208) and catalytic triad (His42, Asp102, and Ser180), which would improve the electron transfer rate and catalytic efficiency. In addition, N-terminal residues modification described here may be a useful approach for improving the catalytic efficiencies and characteristics of other target enzymes.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2012.05a
• /
• pp.8-8
• /
• 2012

Ginseng have been traditionally used for strengthening immunity, providing nutrition and recovering health from fatigue. Recently, pharmaceutical activities of ginseng roots have been proven by many researches, and ginseng has become a world-famous medicinal plant. Ginseng saponin, ginsenoside, is one of the most important secondary metabolite in ginseng which has various pharmacological activities. Many studies have aimed to convert major ginsenosides to the more active minor ginsenoside Rg3 for consumer demand ginseng product. Microbial strain GS514 strain was isolated from soil around ginseng roots for enzymatic preparation of ginsenoside Rg3, which strain shows strong ability of converting ginsenoside Rb1and Rd into Rg3 in the solution with NaCl. The gene encoding a ${\beta}$-glucosidase from this GS514 was cloned and expressed in the BL21 (DE3) strain of Escherichia coli. The recombinant enzyme was purified and characterized. The molecular mass of purified was 87.5 kDa, as determined by SDS-PAGE. The gene sequence revealed significant homology to the family 3 glycoside hydrolases. The purified single enzyme also catalyzed the conversion of ginsenoside Rb1 into Rg3. This target enzyme will be able to produce as much saponin for consumer demand ginseng product. Anti-apoptotic proteins bind with pro-apoptotic proteins to induce apoptosis mechanism. Over expression of these anti-apoptotic proteins lead to several cancers by preventing apoptosis. Docking simulations were performed for anti-apoptotic proteins with several ginsenosides from Panax ginseng. Our finding shows ginsenosides particularly Rg3, Rh2 and Rf have more binding affinity with apoptotic proteins. Further, these docking system of each ginsenosides can be extended to experimental screen system for further brief confirmations of several diseases.

• Korean Journal of Food Science and Technology
• /
• v.33 no.6
• /
• pp.769-773
• /
• 2001

Protein content of okara and soybean were found to be 37.3% and 42.5%, respectively by micro-Kjeldahl analysis. Solubility of okara protein in phosphate buffer (pH 8) was 10% versus soy protein of 68.4%. Insolubilization of okara protein was mostly due to disulfide bonding between cysteine residues caused by excessive heat treatment during soymilk processing: hydrophobic interactions and hydrogen bondings were involved to lesser extent. Optimum extraction temperature and time were $60^{\circ}C$ and 40 min. Typical solubility profile of soy protein disappeared for okara protein though minimum solubility of the protein was around pH 3.0. Treating okara with protease was effective in solubilizing okara protein and solubility increased to 19.2%. Optimum reaction temperature and time were $80^{\circ}C$ and 50 min, respectively. Cell wall degrading enzyme did not increase solubility of the protein, however. Through enzymatic reaction okara protein could be effectively solubilized for uses as food ingredient.

• Environmental Engineering Research
• /
• v.24 no.4
• /
• pp.670-679
• /
• 2019

Lignin complexity molecule makes its biodegradation difficult during lignocellulosic wastes composting. So, the improvement of its biodegradation has usually been considered as an objective. This study aimed to determine the impact of Trametes trogii inoculation on organic matter and particularly on lignin and cellulose during green wastes co-composting with olive mill waste water sludge and coffee grounds. Three types of heaps (H1, H2 and H3) were investigated during 180 d. H3 and H2 were inoculated at the beginning of the process (t₀) and 120 d later (t₁₂₀), respectively while H1 was the control. Results showed the absence of pH stabilization in H3 during the first month. Also, in this period we observed a faster degradation of some easily available organic matter in H3 than in the other heaps. After 120 d, a better cellulose decomposition (25.28%) was noticed in H3 than in H1 and H2 (16%). Inoculation during the second fermentation phase induced supplementary lignin degradation in H2 with a percentage of 35% against 23 and 26% for H1 and H3, respectively. For all the runs, a Fourier Transform Infrared analysis showed aliphatic groups' decrease, OH groups' increase and lignin structural modification.