• 환경영향평가
• /
• 제23권6호
• /
• pp.477-491
• /
• 2014

본 연구는 창원시 도시지역을 대상으로 다양한 물리적 환경요인과 복사에너지 간의 관계성을 분석함으로서 열쾌적성을 개선하기 위한 계획 방안을 마련하는데 목적이 있다. 물리적 환경요인은 건물의 배치형태를 고려한 Sky view factor(SVF)와 토지피복 및 토지이용유형을 고려하였고, 복사에너지는 여름철에 주간 및 야간으로 3일 동안 이동식으로 태양 및 지구복사에너지의 유입과 유출량을 측정하였다. SVF를 분석한 결과 주변에 건물이 거의 존재하지 않는 도시공원에서 높았고, 반면에 고층의 건물이 밀집된 고층아파트와 상업지역은 매우 낮은 수치를 보였다. 복사에너지는 주간시간은 지표면으로 유입되는 태양복사에너지가 약 $700W/m^2$로 가장 높았고, 야간시간에는 지구복사에너지의 유입과 유출만 있고, 그 양은 약 $450W/m^2$이였다. 지표면으로 유입되는 태양복사에너지는 건물이 밀집된 공간형태일수록 감소하는 경향을 보였고, 대기중으로 향하는 태양 및 지구복사에너지는 반사율과 방사율, 그리고 열용량과 같은 열적특성에 따른 영향이 큰 것으로 나타났다. 그러므로 도시지역의 열쾌적성을 개선하기 위해서는 건물이 밀집된 지역에 대해 배치형태를 조정하거나 벽면녹화를 조성하고, 지표면에 자연적 피복재질로 교체하는 계획방안이 필요할 것으로 판단된다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제33회 KOSCO SYMPOSIUM 논문집
• /
• pp.117-121
• /
• 2006

Non-thermal plasma technology has many applications in various areas. One of the applications is regenerating diesel particulate filter (DPF). DPF is a widely applied device to control the particulate emission of diesel engines. But it needs periodic removal of clogged soot for the smooth running of engine. Conventional high-temperature removal processes easily leads to the breakage of DPF. Herein, low-temperature plasma formed in a dielectric barrier discharge (DBD) reactor was used to form active oxidants such as ozone and nitrogen dioxide. Experimentally, the effects of discharge power and frequency on the performance of DBD reactor were studied. Two oxidants, $O_3$ and $NO_2$, were synthesized and used for incinerating soot in the used DPF. Performances of the two oxidants on the reduction of soot were compared, and it was found that $NO_2$ is more effective than $O_3$ for getting rid of soot

• 한국지역사회생활과학회지
• /
• 제26권3호
• /
• pp.589-595
• /
• 2015

This study examines how exercise habits affect human thermoregulatory responses. A total of 14 healthy male college students participated in this study as subjects: 8 students who exercised regularly (REG) and 6 students who did not (IREG). First, there were no significant differences between REG and IREG in rectal and mean skin temperatures. Second, the general thermal sensation was "slightly warm" at the equilibrium state and "cool" during body cooling in both groups with no significant differences between the two groups. This implies that exercise habits did not affect the subjective thermal sensation under this study's environmental conditions. Third, there were no significant correlations between the preferred temperature and related variables such as rectal and mean skin temperature changes, oxygen uptake, and the general thermal sensation in REG. However, there were significant correlations between the preferred temperature and the mean skin temperature change (p<0.05) and oxygen uptake(p<0.01) in IREG. In sum, these results suggest weak effects of exercise habits on daily life at the individual level. Therefore, future research should verify this study's results under controlled conditions such as cooling intensity and durations.

• 자원ㆍ환경경제연구
• /
• 제15권3호
• /
• pp.451-477
• /
• 2006

기술확산 단계에서 이루어지는 기술대안에 대한 평가는 단순한 과정이 아니고, 기술적 특성뿐만 아니라 경제적 효과 등 여러 가지 요소들이 고려되어야 하는 복합적인 평가과정을 가지게 된다. 이는 오늘날 산업계 각 분야에서 바람직한 기술대안의 평가, 선정 및 적용이 기업경쟁우위에 지대한 영향을 미치며 나아가 기업의 생존 및 성장을 좌우하기 때문이다. 본 연구에서는 열공급시스템의 기술적 대안 선정을 위한 방법론으로서 MAUT 방법을 고찰하고, 이 방법의 실무적 적용 가능성을 검토하기 위해 에너지기술분야의 폐열 활용시스템 대안들에 대한 평가에 적용한 결과를 제시하였다.

• 한국태양에너지학회 논문집
• /
• 제27권4호
• /
• pp.137-146
• /
• 2007

This study is about the passive cooling effects of three outdoor solar shading facilities as trees, pergola with wistaria vine and membrane shading structure, which are expected to provide cool spots in the summer. Field observations of measuring thermal environment of selected facilities is executed. Thermal environment measuring was categorized as short wave radiation, long wave radiation, net radiation, globe temperature, surface temperature measured by infrared camera. Heat transfer mechanism is analyzed with overall data from field measurement. Results from this study are as below; 1) Radiation balance measured on shaded surface under membrane shading structure was 17%($86W/m^2$) of the unshaded surface radiation balance($511W/m^2$). 2) Surface temperature comparison between vegetation and membrane of the shading structure is performed at 3 o'clock in the afternoon. Surface temperature of vegetation was same as air temperature and that of membrane was $5^{\circ}C$ higher than air temperature. Vegetation transpiration is considered as the causing factor which make those differences. 3) Results from this study could be used as fundamental data for reducing heat island phenomena and continuos research on this subject would be needed.

• 물과 미래
• /
• 제23권4호
• /
• pp.487-497
• /
• 1990

원자력·화력, 제철소 등의 임해공업시설로부터 온수 방출의 확산에 대한 정성, 정량적 예측은 환경관리 및 냉각수 취·배수로 설계에 매우 중요하다. 본 연구는 난류 및 부력효과가 강한 온배수의 주요 물리적 특성을 규명하고 실무에 많이 사용되고 있는 MIT 및 PDS 적분모델의 비교평가를 실시하였다. 일반적으로 MIT 및 PDS 모델은 성층화되지 않은 수역에서 주위수 및 제트 방출각도를 고려하여 온배수 거동을 산정하는 모델이다. 해석결과는 그 구성의 상이성에 의해 매우 다름이 규명되어, 온배수의 정확한 산정을 위해서는 난류모델을 이용한 수치모델의 개발 및 이의 적용이 요구된다.

• Advances in nano research
• /
• 제7권2호
• /
• pp.89-98
• /
• 2019

In this work, the thermal buckling characteristics of zigzag single-walled boron nitride (SWBNNT) embedded in a one-parameter elastic medium modeled as Winkler-type foundation are investigated using a nonlocal first-order shear deformation theory (NFSDT). This model can take into account the small scale effect as well as the transverse shear deformation effects of nanotubes. A closed-form solution for nondimensional critical buckling temperature is obtained in this investigation. Further the effect of nonlocal parameter, Winkler elastic foundation modulus, the ratio of the length to the diameter, the transverse shear deformation and rotary inertia on the critical buckling temperature are being investigated and discussed. The results presented in this paper can provide useful guidance for the study and design of the next generation of nanodevices that make use of the thermal buckling properties of boron nitride nanotubes.

• Advances in materials Research
• /
• 제11권3호
• /
• pp.191-209
• /
• 2022

Very slow degradation of synthetic based polymers has created a severe environmental issue that increased awareness towards research in polymers of biodegradable property. Soy protein isolate (SPI) is a natural biopolymer used as matrix in green composites but it has limitations of low mechanical properties and high water sensitivity. To enhance mechanical properties and reduce water sensitivity of Jute-SPI composites, SPI was modified with pine rosin which is also a natural cross-linking agent. 30% glycerol on the weight basis of a matrix was used as a plasticizer. The fibre volume fraction was kept constant at 0.2 whereas the pine rosin in SPI ranged from 5% to 30% of the matrix. The effects of pine rosin on mechanical, thermal, water sensitivity and surface morphology have been characterized using various techniques. The mechanical properties and water absorbency were found to be optimum for 15% pine rosin in Jute-SPI composite. Therefore, Jute-SPI composite without pine rosin and with 15% pine rosin were chosen for investigation through characterization by Fourier transforms infrared spectroscopy (FTIR), Thermo-gravimetric analysis (TGA), X-Ray diffraction (XRD) and Scanning electron microscope (SEM). The surface morphology of the composite was influenced by pine rosin which is shown in the SEM image. TGA measurement showed that the thermal properties improved due to the addition of pine rosin. Antimicrobial test showed antimicrobial property in the composite occurring 15% pine rosin. The research paper concludes that the modification of SPI resin with an optimum percentage of pine rosin enhanced mechanical, thermal as well as water-resistant properties of jute fibre reinforced composites.

• 한국재료학회지
• /
• 제22권12호
• /
• pp.701-705
• /
• 2012

The effects of clay, aluminum hydroxide, and carbon powder on the sintering of a Si/SiC mixture from photovoltaic silicon-wafer production were investigated. Sintering temperature was fixed at $1,350^{\circ}C$ and the sintered bodies were characterized by SEM and XRD to analyze the microstructure and to measure the apparent porosity, absorptivity, and apparent density. The XRD peak intensity of SiC in the sintered body was increased by adding 5% carbon to the Si/SiC mixture. From this result, it is confirmed that Si in the Si/SiC mixture had reacted with the added carbon. Addition of aluminum hydroxide decreased the cristobalite phase and increased the stable mullite phase. The measurement of the physical properties indicates that adding carbon to the Si/SiC mixture enables us to obtain a dense sintered body that has high apparent density and low absorptivity. The sintered body produced from the Si/SiC mixture with aluminum hydroxide and carbon powder as sintering additives can be applied to diesel particulate filters or to heat storage materials, etc., since it possesses high thermal conductivity, and anticorrosion and antioxidation properties.

• 한국환경복원기술학회지
• /
• 제22권5호
• /
• pp.45-56
• /
• 2019

Urban green areas are generally composed of relatively small and fragmented patches, but it is a critical factor for the quality of an urban environment. They have positive effects such as increasing green connectivity, reducing runoff, and mitigating urban heat. But, there is a lack of urban greening plans that consider the comprehensive effects of green space in real urban areas. To fill this gap in this literature, this study identifies a planning model that determines the optimal locations for maximizing green areas' multiple effects(e.g., heat mitigation and enhancement of connectivity) by using unused lots. This model also considers minimizing costs using meta-heuristic optimization algorithms. As a results, we finds 50 optimal plans that considers two effects within the limited cost in Nowon-gu. The optimal plans show the trade-off effect between connectivity, heat mitigation and cost. They also show the critical unused land lots for urban greening that are commonly selected in various plans. These optimal plans can effectively inform quantitative effectiveness of green space and their trade-off. We expect that our model will contribute to the improvement of green planning processes in reality.