• 한국해양공학회지
• /
• 제37권5호
• /
• pp.215-224
• /
• 2023

While melting glaciers due to global warming have facilitated the development of polar routes, Arctic vessels require reliable anti-icing methods to prevent hull icing. Currently, the existing anti-icing method, i.e., the heating coil method, has disadvantages, such as disconnection and power inefficiency. Therefore, a carbon nanotube-based surface heating element method was developed to address these limitations. In this study, the numerical analysis of the surface heating element method was performed using ANSYS. The numerical analysis included conjugate heat transfer and computational fluid dynamics to consider the conduction solids and the effects of wind speed and temperature in cold environments. The numerical analysis method of the surface heating element method was validated by comparing the experimental results of the heating coil method with the numerical analysis results (under the -30 ℃ conditions). The surface heating element method demonstrated significantly higher efficiency, ranging from 56.65-80.17%, depending on the conditions compared to the heating coil method. Moreover, even under extreme environmental conditions (-45 ℃), the surface heating element method satisfied anti-icing requirements. The surface heating element method is more efficient and economical than the heating coil method. However, proper heat flux calculation for environmental conditions is required to prevent excessive design.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.490-493
• /
• 2004

In the analysis of early-age concrete behavior, the fresh concrete is considered as a structural element immediately after mixing. But for the activation of real structural behavior in the fresh concrete, the so-called setting time is necessary a few hours after the beginning of hydration reaction. In this paper, analysis on the setting behavior is carried out by proposing an analytical model based on the percolation theory as well as the expanding cluster model by defining the setting as a microstructure formation in fresh concrete. An experimental investigation is also carried out to show the influences of curing temperature, mineral admixtures and chemical admixture on setting behavior of fresh concrete. Finally, the analytical results using proposed model are compared with the experimental results for the sake of verification.

• 동력기계공학회지
• /
• 제20권5호
• /
• pp.52-59
• /
• 2016

Environmental Qualification has been almost developed except those of Non-Material Sub-components for valves and pumps though the time has only passed about 10years since EQ test launch of Korea. However EQ test has been performed by a few of engineers under the conditions that experience of EQ test is insufficient and EQ system is not developed completely. In recent years, Strengthen Nuclear Safety Regulation is being done Strictly Nuclear safety components Verification Procedure for Non-Material Sub-components, but the reports contain only performance test results, not Enviro nmental test methods relating to real Aging Degradation. In this Study, there were developed to performance systematically research to acquire EQ technology for five specimens of the Non-Material Sub-components in the Nuclear Power Plant.

• 한국산림과학회지
• /
• 제100권3호
• /
• pp.315-326
• /
• 2011

최근 기후변화와 관련하여 국내를 비롯한 국제적인 관심이 증폭되고 있으며, 이러한 시대적인 흐름 속에 탄소흡수원으로서의 산림의 중요성이 부각되고 있다. 특히, 산림전용 및 황폐화 방지를 통한 온실가스감축(Reduced Emissions from Deforestation and Degradation, REDD) 및 산림탄소축적보존 및 증진, 지속가능한 산림경영을 포함하는 REDD+가 post-2012에 이행될 신규 메커니즘으로 활용될 전망이다. 메커니즘의 이행을 위해서는 기본적으로 MRV(Measuring, Reporting and Verification) 시스템을 통해 메커니즘 적용 효과를 인증 받아야 한다. 본 연구에서는 가장 효율적인 모니터링 방법 중 하나로 인정받고 있는 다양한 원격탐사기술의 토지피복변화 탐지 및 탄소축적량 추정하는 방법 및 효과를 비용 및 기술(불확실성)측면에서 분석하였다. 그 결과 토지피복변화탐지를 위해서는 중해상도 광학영상 및 위성 탑재 SAR(Synthetic Aperture Radar)가 가장 적합한 원격탐사자료로 도출되었다. 그리고 탄소축적량 추정에 있어서는, 항공기 탑재 LiDAR(Light Detection and Ranging), SAR와 같이 불확실성이 낮은 기술과 비용효율적인 기술인 중해상도 광학영상, 위성 탑재 SAR 간의 통합을 통해 효율적인 결과를 도출할 수 있음을 확인할 수 있었다. 하지만, 아직까지 본 메커니즘에 대한 명확한 인증기관, 가이드라인 및 불확실성에 대한 기준이 결정 되지 않고 있으므로, 추후 지속적인 관심을 통해 국제적인 흐름을 파악하고, 적합한 방법론을 구축해야 한다. 뿐만 아니라 개발된 메커니즘을 대상 개도국에 활용하기 위해서는 긴밀한 국제협력관계 구축 및 대상국에 적합한 모니터링 방법 또한 고려해야 할 필요성이 있다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 학술대회
• /
• pp.14-17
• /
• 2008

Recently, several advanced flow visualization techniques such as Particle Image Velocimetry (PIV) including stereo PIV, holographic PIV, and dynamic PIV have been developed. These advanced techniques have strong potential as the experimental technology which can be used for verifying numerical simulation. In addition, there would be indispensable in solving complicated thermo-fluid flow problems not only in the industrial fields such as automotive, space, electronics, aero- and hydro-dynamics, steel, and information engineering, but also in the basic research fields of medical science, bio-medical engineering, environmental and energy engineering etc. Especially, NT Nano Technology) and BT (Bio Technology) strongly demand these advanced measurement techniques, because it is difficult for conventional methods to observe most complicated nano- and bio-fluidic phenomena. In this paper, the basic principle of these advanced visualization techniques and their practical applications which cannot be resolved by conventional methods, such as flow in automotive HVAC system, ship and propeller wake, three-dimensional flow measurement in micro-conduits, and flow around a circulating cylinder will be introduced.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년 추계학술대회논문집
• /
• pp.14-17
• /
• 2008

Recently, several advanced flow visualization techniques such as Particle Image Velocimetry (PIV) including stereo PIV, holographic PIV, and dynamic PIV have been developed. These advanced techniques have strong potential as the experimental technology which can be used for verifying numerical simulation. In addition, there would be indispensable in solving complicated thermo-fluid flow problems not only in the industrial fields such as automotive, space, electronics, aero- and hydro-dynamics, steel, and information engineering, but also in the basic research fields of medical science, bio-medical engineering, environmental and energy engineering etc. Especially, NT (Nano Technology) and BT (Bio Technology) strongly demand these advanced measurement techniques, because it is difficult for conventional methods to observe most complicated nano- and bio-fluidic phenomena. In this paper, the basic principle of these advanced visualization techniques and their practical applications which cannot be resolved by conventional methods, such as flow in automotive HVAC system, ship and propeller wake, three-dimensional flow measurement in micro-conduits, and flow around a circulating cylinder will be introduced.

• 한국기계기술학회지
• /
• 제20권6호
• /
• pp.936-940
• /
• 2018

Wasted meat & bone has generated as byproducts in the slaughtering process of livestock and also faced with demands for its recycling and environmental protection. Many studies have been conducted to recycle byproducts and carried out mainly on the crushing of bones and the vacuum packing technology of products. In this study, the crushing unit, transporting unit, separated unit and packing unit have designed for development of the crushing and packing systems. Also, to confirm the performance of this system, the experimental verification were carried out the working noise and packing weight.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.1113-1124
• /
• 2009

The limit equilibrium method and finite element method have been commonly used to assess the stability of anchored slope. However, the existing limit equilibrium methods do not consider the load transfer of anchor and, if the potential failure surface crosses the bonded zone of anchors, the anchor loads are not included in computing the factor of safety. In this paper, simplified bishop method, one among several methods based on the limit equilibrium is used to develope the Excel Sheet program and the working load of anchor along the failure surface is calculated by Flamant's formula, proposed by Morlier and Tenier(1982). Additionally, the finite element analysis of anchored slope considering the load transfer is performed in order to compare with the result from the limit equilibrium analysis and analyze the reinforced effect of anchor. From this study, new modelling method that limits the reinforcing range and considers the load transfer is proposed and Excel Sheet program is developed. The factor of safety for several cases between PC STABL and Excel Sheet program is also compared for verification of the program.

• Nuclear Engineering and Technology
• /
• 제56권8호
• /
• pp.2906-2915
• /
• 2024

Radiocarbon (¹⁴C), with a radioactive half-life of approximately 5730 years, poses a long-term environmental contamination risk when released into the atmosphere. The quantification analysis of its release estimates plant-specific generation rates based on factors such as plant power, core neutron flux distribution, and the volume of water exposed to this flux. Utilizing the improved estimation method, the ¹⁴C production rate for several Korean Pressurized Water Reactors (PWRs) was calculated. Also, improvements in measurement methods through sampling have also been made. These enhancements include the verification of the absorption method versus the mixing method. The results of this study indicate that plant-specific ¹⁴C production rates range from 0.213 to 0.317 TBq/yr, which are comparable to the global range observed in PWRs. Furthermore, the study evaluated a quenching correction curve for a liquid scintillation counter using two quenching correction methods: the external standard method and the internal standard method. The accuracy of these methods with 72 samples was validated with an average relative error within ±2.5%. The relative error of the mixing method, when compared to the direct absorption method, was found to be within ±20%. This finding underscores the validity of the improved measurement technique.

• 한국ITS학회 논문지
• /
• 제23권4호
• /
• pp.54-66
• /
• 2024

최근 자율주행 차량을 지원하기 위한 다양한 신규 ITS 서비스들이 등장하고 있다. 인프라 가이던스 서비스도 자율차의 주행능력을 향상시킴으로서 비자율차 운전자와 조화를 이루는 교통흐름을 유도하기 위해 등장한 신규 ITS 서비스중 하나이다. 이와 같은 신규 ITS서비스를 도입하기 위한 검증절차로서 연구자는 시뮬레이션 및 테스트베드 검증 등을 수행하게 된다. 그러나 도로에서 발생할 수 있는 다양한 공간적, 상황적 범위를 모두 고려한 테스트 시나리오 수립에는 현실적 어려움이 발생한다. 본 연구에서는 자율주행 신기술로서 연구를 수행중인 인프라 가이던스 서비스를 중심으로 신규 ITS 서비스 검증을 위한 테스트 시나리오 설계방법에 대하여 제시하고자 한다.