• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.10
• /
• pp.1379-1387
• /
• 2013

In a majority of mammals, male infants have heavier body mass and grow faster than female infants. Accordingly, male offspring nursing requires a much greater maternal energy contribution to lactation. It is possible that the maternal-fetal immunoendocrine dialog plays an important role in female preparation for lactation during pregnancy. Immune system genes are an integral part of gene regulatory networks in lactation and tumor necrosis factor alpha ($TNF{\alpha}$) is a proinflammatory cytokine that also plays an important role in normal mammary gland development. The aim of this study was to evaluate the influence of the sex of calf and/or the -824A/G polymorphism in the promoter region of $TNF{\alpha}$ gene on milk performance traits in Black Pied cattle over the course of lactation. We also studied the allele frequency differences of -824A/G variants across several cattle breeds, which were bred in different climatic conditions. The G allele frequency decreased gradually over the course of lactation events in the Black Pied dairy cattle because of a higher culling rate of cows with the G/G genotype (p<0.001). In contrast to the genotypes A/A and A/G, cows with G/G genotype showed significant variability of milk and milk fat yield subject to sex of delivered calf. Milk yield and milk fat yield were significantly higher in the case of birth of a bull calf than with a heifer calf (p<0.03). The G allele frequency varies from 48% to 58% in Grey Ukrainian and Black Pied cattle to 77% in aboriginal Yakut cattle. Our results suggest that the $TNF{\alpha}$-824A/G gene polymorphism may have an influence on the reproductive efforts of cows over the course of lactation events depending on the sex of progeny. Allocation of resources according to sex of the calf allows optimizing the energy cost of lactation. This may be a probable reason for high G allele frequency in Yakut cattle breeding in extreme environmental conditions. Similarly, the dramatic fall in milk production after birth of a heifer calf increases the probability of culling for the cows with the G/G genotype in animal husbandry.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.6C
• /
• pp.231-240
• /
• 2011

Various pile load tests were carried out at Gwangyang district for 10 different piles in order to analyze the characteristcs of steel pile using high strength steel and high driving energy. Pile drivability results showed that PHC piles needed highest total blow count even with the shortest pile length and high strength steel pipe piles showed smallest total blow count eventhough driven to a more hard ground condition with longer pile length. Pile dynamic analysis results showed that for PHC pile and general steel pipe pile the allowable pile design load was decided by the allowable material strength but for high strength steel pipe pile the design load can be decided according to the ground bearing capacity. Static load test and load transfer test results showed that the pile design efficiency could be improved over 80% allowing lesser number of piles necessary for a more economical solution. Set-up effects was analyzed and regression equation for the site ground condition was derived. Bearing capacity was checked with widely used design equation and the limitation of current design method and future technology development on this subject is dicussed in this paper.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.16 no.4 s.44
• /
• pp.405-416
• /
• 1992

This study was performed to investigate correlation between total body weight loss and local sweat rate and to find out any possible method that can estimate total body weight loss judging from local sweat rate. Twelve adult females were kept at 44 $\pm1^{\circ}C$, 50 ${\pm}5\%$ R.H. (1) Physiological responses such as total body weight loss, local sweat rate, rectal temperature, skin temperature, blood pressure and pulse, (2) micro climate inside garment and (3) subjective sensation were examined. Two types of garment such as long-sleeves with long pants (Type I) and half·sleeves with short pants (Type II) were used to observe the effect of garment types on sweating response. Both clothing weight was equal (132$\pm$3 g/$m^{2}$). The results were as follows: 1. Regardless of the different types, total body weight loss was more interrelated with the sweat rate on forehead than any other parts of the body. Except the forehead, different parts of body with different types of garment influenced on body weight loss quite differently. 2. Total body weight loss was more interrelated with the weight gain of garment than the local sweat rate. 3. Under the environment of 44$\pm1^{\circ}C,\;50{\pm}5\%$R.H., body weight loss during 1 hour of subject clothed and silted was 275.2 g/hr and weight loss per body surface area was 178.9 g/$m^{2}/hr$ Garment types have no influences on total body weight loss. 4. Local sweat rate (mg/7.07 $cm^{2}/hr$) was 208.0,191.0, 133.0, 115.0,81 0, 75.1 and 66.3 on scruff, breast, forehead, forearm, thigh, upper arm, leg respectively No evidence has been found that garment types influenced on local sweat rate (p<0.1). 5. No interrelationships between rectal temperature and total body weight loss, local skin temperature and total body weight loss, and local skin temperature and local sweat rate were found. From this study, some possible method that we can estimate total body' weight loss judging from weight loss of garment. But considering the fact that clothing design factor, the physical characteristics of fabric and environmental factor such as humidity and wind velocity should be concerned in weight loss of garment, it should be studied further whether the total body weight loss can be estimated properly from the weight loss of garment. This experiment suggest that different parts of body with different types of garment can influence on body weight loss quite differently. Therefore, in order to get more precise results, more studies under the diversity of garment types should be done in the near future.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.6 no.2
• /
• pp.22-32
• /
• 2003

The purpose of this study is to analyze soil erosion quantity of a basin by using DEM, soil map and landuse map and to find a soil erosion hazard zone in a basin based on this data. In this study, RUSLE was used to analyze soil loss quantity and the research area chosen is Mushim stream which branches off the Geum river. This study used a mean annual precipitation of Cheongju Meteorological Observation was used as a hydrological data and DEM, the detailed soil map(1/25,000), the landuse map collected respectively from Ministry of Environment, National Institute of Agricultural Science and Technology and Ministry of Construction and Transportation. The subject map was drawn to analyze soil erosion hazard zone by using the above data and maps. According to the results of the analysis, a lot of soil loss shows in a bare area. In case of a forest, a slope has a lot of influence on soil loss. The integration and analysis of the above gave the result that $193,730.3m^2$corresponding to 8.5% of the places of which the slope is over 20 degree in a bare area was found to have a higher chance of soil erosion.

• Journal of Embryo Transfer
• /
• v.6 no.2
• /
• pp.1-17
• /
• 1991

It is widely recognized that the embryonic or fetal loss after breeding is common in the cattle and that it is an important factor affecting reproductive efficiency. The causes of this loss have been subject of extensive researches and the results indicate that the embryonic mortality may he primary factor responsible for low pregnancy rates in non-embryo transfer bovine populations as well as embryo transfer programs. However, it's causes are still not clearly understood. The embryonic mortality or pregnancy rate has been influenced by various embryonic and maternal effects related to genetic and environmental factors. The timing and extent of embryonic mortality vanes greatly according to authors and estimating methods, because it is difficult to make direct measurements. The major important factors that may influence the embryonic losses or pregnancy rates after embryo transfer can be summeirized. 1.When an embryo is transferred to unmated recipients, the contralateral transfer to corpus luteum results in a lower survival rate than ipsilateral deposition. When the embryos are transferred for the production of twin calves, their survivals and twin pregnancies have quite inconsistent according to the transfer methods either to the unmated-synchronized or already mated recipients and more works are needed to accurrately clarify the previous results. 2.Although embryos can be cultured in vitro some hours without the great declines in pregnancy rates, the rates differ markedly among culture times and media but may be improved by co-transfer systems. 3.Embryo developmental stages and quality grades clearly affect the survival rate following freezing and the pregnancy rate after transfer and the selection of embryos without chromosome abnormalities and of high fertile semen may also be considered to increase the pregnancy rates. 4.Many researches have attempted to relate the plasma progesterone levels to pregnancy rates and others have done either direct progesterone supplementation or luteal stimulation by hCG treatment in order to increase the pregnancy rates. However, these effects on pregnancy rates are inconsistent and also contradictory. 5.The asynchrony between donors or embryos and recipients may he a major cause of embryo death and low pregnancy rate and the sensitivity to uterine asynchyony differs in according to the quality and stages of embryos. 6.The extremes of poor or over nutrition during early pregnancy in the recipients are detrimental to the survival of embryos and the good body condition is required to prevent a reduejion of pregnancy rates. The uterine pathogens in embryonic mortality or fertility have been questioned but the infection of C.pyogenes and Campylobacter fetus is still important pathogens. 7.The heat stress during early pregnancy may reduce conceptus weight and possibly increase the embryonic mortality.

• Journal of Biomedical Engineering Research
• /
• v.24 no.5
• /
• pp.427-434
• /
• 2003

In this paper, we present a speech-based Environmental Control System(ECS) and its application. In the concrete, an ECS using the speech recognition and an portable wheelchair lift control system with the speech synthesis are developed through the simulation and the embodiment. The developed system apply to quadriplegic man and we evaluate the result of physical effect and of mental effect. Speech recognition system is constructed by real time modules using HMM model. For the clinical application of the device, we investigate the result applied to 54-years old quadriplegic man during a week through the questionnaires of Beck Depression Inventory and of Activity Pattern Indicator. Also the motor drive control system of potable wheelchair lift is implemented and the mechanical durability is tested by structural analysis. Speech recognition rate results in over 95% through the experiment. The result of the questionnaires shows higher satisfaction and lower nursing loads. In addition, the depression tendency of the subject were decreased. The potable wheelchair lift shows good fatigue life-cycle as the material supporting the upper wheelchair and shows the centroid mobility of safety. In this paper we present an example of ECS which consists of real-time speech recognition system and potable wheelchair lift. Also the experiments shows needs of the ECS for korean environments. This study will be the base of a commercial use.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.70
• /
• pp.159-179
• /
• 2016

Companies do not be resolved by the FTA services of external aid should be operational by assigning dedicated personnel inside the company. FTA is a choice, not an essential trade agreement requirements. If the exporter contracts to provide a certificate of origin in trade agreements, it shall issue a certificate of origin of goods originating management is performed. When considering the future trend of spreading wide FTA, it should be extended to one year to take advantage of the FTA Certificate of Origin environments utilizing a comprehensive environment for regional countries that require proof of origin between certain countries, such as current. FTA utilization of the future is to utilize the GVC(Global Value Chain) efficiently. In other words, the expansion of the consumer market and take advantage of an efficient production base across borders. These environmental changes are needed development of the FTA utilization promotion and FTA experts. The experts studying how to procure raw materials or intermediate goods exports in a variety of regional foreign countries, to meet the rules of origin is required for a successful FTA utilization. One of the objectives of Origin managers are qualified experts in the country of origin can take advantage of the FTA plan. Therefore, managers of origin shall collect their ability to expand the understanding and information about the industry as an international business perspective beyond the Certificate of Origin. In addition, it should be in their best learning expertise for the introduction and development of country of origin control system in an effort to effectively perform its international FTA utilization. Once the FTA is more widespread in the future and build a common origin information it must not be disconnected until the export enterprises from terminal manufacturers systematically. Therefore origin management is preferred by expanding the knowledge base of teaching and learning in the common sense to the universal subject of specialization from professional schools to promote the relevant departments so that they can be opened in a college or university. An FTA hub linking East and West, also need the confidence that in order to become a center of Glabal Supply Chain Using an FTA Certificate of Origin and stable environment for importers to import products from the country offers. Certificate of Origin and all of them thoroughly exporters and companies related to the administration of origin and should create an atmosphere that can effectively respond to the origin verification. Korea shall endeavor to elicit a geopolitical value (FTA Hub), as well as securing a competitive advantage in the global industry leverage, trading at a reasonable price competitive products thereby enhancing production and economic growth through the FTA.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.2
• /
• pp.327-331
• /
• 2020

In that this study is a subject and character of risk, emerging security covers non-military areas in addition to traditional military security: environmental security, human security, resource security, and cyber security. The rise of these risks is not only changing the phenomenon of the new expansion of security areas, but also the expansion of the number and scope of security entities and the aspect of security world politics. These risks are transnational security issues at the global level in terms of their nature and extent of the damage, as well as multi-layered ones that affect local and personal security issues at the regional and national levels. In addition to national actors, non-state actors such as international organizations, multinational corporations, and global civil society, and furthermore, technology and social systems themselves are causing risks. Therefore, to solve the new security problem, it is necessary to establish a middle-level and complex governance mechanism that is sought at the regional and global levels beyond the fragmented dimension of the occurrence of new security issues that have been overlooked in the existing frame of perception, and to predict and find ways to respond to new security paradigms that have been identified in a broader sense.

• Journal of Forest and Environmental Science
• /
• v.13 no.1
• /
• pp.66-80
• /
• 1997

Pinus koraiensis is one of the major speciese which have been recently planted for ten years and consists of 31% of total plantation. Presently young stand less than 30 years consists of 87% of total forest, but tending thinning of it is hardly carried out and the desirable direction for the thinning is not established yet. The objective of the study is to introduce the optimum thinning plan and thinning method through the long-run experiment of tending thinning for the Pinus koraiensis stand. The experiments carry out to interprete its growth model on the subject of two thinning experimental plots and yield table of Pinus koraiensis. As the basic step for understanding the thinning process, a theoretical growth model which is suitable to express the growth process is required. For that purpose, three growth functions (Mitscherlich, 4 parameter Richards, 3 parameter Richards) are applied to the diameter growth of the sample trees which are taken in the two plots. The results show that 3 parameter Richards is the most suitable. It is also verified that the diameter growth, the height growth, and the decrease in the number of stocks can be estimated by this function. To estimate the growth change of single tree, growth model including parameter h which is related to the occupation area of single tree are introduced. The parameter h can be estimated by using the data of the diameter growth obtained from the established experimental plots. Therefore, if both verification and modification of the usefulness of the model suggested is made, equations which tell about the thinning effects could be drived by estimating the growth process of single tree in advance.

• Journal of Korean Home Economics Education Association
• /
• v.31 no.4
• /
• pp.81-95
• /
• 2019

This study examined the research trends of sustainable development education in the family life area, focusing on papers published in journals specialized in the Practical Arts (Technology & Home Economics) subject from 1989 to 2018. The papers from three journals were selected based on the titles, abstracts, and keywords for their contents related to sustainable development education. The results were analyzed by frequency analysis and cross-tabulation. Sustainable development education has surged since the mid-2000s when national interest on this topic sharply increased. Rather than focusing on particular content areas in home economics, most research was conducted through an integrated approach. More than half of the studies were conducted in experimental studies, with the largest number of studies involving elementary school students. Of the three components of ESD, research on society was most frequently conducted, followed by the environmental area. The contents of the home economics curriculum and the details of sustainable development were related. More related research should be conducted so that various sustainable development education can improve students' practical problem-solving ability through Practical Arts (Technology & Home Economics) curriculum.