• 한국해양학회지
• /
• v.30 no.5
• /
• pp.390-402
• /
• 1995

Bimonthly sampling was carried out over the period February 1983 to April 1985 at two stations in Kwang-yang Bay, Korea, in order to study the temporal changes of benthic ploychaete communities. In addition, an important focus of the study was the large-scale reclamation and dredging operations that were taking place for industrial purposes during the study period. The muddy station, located on the main channel, showed high mud content (94%), whereas the sandy station, situated on the north channel of Myodo, demonstrated mud content of 42%. At the muddy station, the number of species and individuals were highest in the early sampling stage, but markedly declined in October 1983, and then gradually increased as in the early state. At the sandy station, the number of species highly oscillated during the entire period. The density was affected by the pectinated Lagis bocki showing particulary high density in February 1983 and 1984. However, the high density in the winter time did not occur in February 1985. The analysis of similarities and clusterings between communities were carried out to evaluate temporal changes in community structure. Significant changes occurred during the study period in the community structures at both stations, but each maintained different patterns of species dominance over time. At the muddy station, this transitionary phase was found in October 1983 but in December 1984 at the sandy station. Comparisons with earlier communities suggest that faunal changes in the dominant species composition occurred from Lumbrineris longifolia to Heteromastus filiformis over this time period. The colonization of this opportunistic pioneer, H, filiformis, seems to manifest environmental disturbances in this bay area.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.4 no.2
• /
• pp.224-239
• /
• 1994

In this study we examined several subjective symptoms in an exposed group and an unexposed group to perchloroethylene. The exposed group consists to 30 workers employed in 23 dry-cleaning establishments located in Chung Cheung Do, whereas the unexposed group consists of 42 officers employed in a certain university. This study was conducted from October, 1993 to March, 1994. Also we investigated personal exposure levels and area concentration of PCE, and performed hematological and biochemical examination in blood and urine samples from the exposed group. The results are : 1. The exposed group highly complains several subjective symptoms, particularly in neuropsychiatry, eye, respiratory system and digestive system, compared with the unexposed group. But complaint rates in the exposed group are not related with PCE exposure levels. 2. PCE exposure levels for all dry-cleaning establishment varied widely, from 0.18 to 37.58ppm. The mean exposure level for centers of chain was 16.85ppm, and for local laundries was 8.83ppm, while for self-service establishment it was 3.07ppm. Eighty three percent of the workers were exposed less than the half-level(25.0ppm) of the Korea 50.0ppm standard for eight-hour PCE exposure. Seventeen percent of them exceeded the half-level of the Korea TLV. 3. Statistical correlation exists between the work load(number of operation cycles of equipment and the mass of processed textiles) and the personal exposure levels to be observed. 4. In hematological examination the values of WBC, RBC, Hgb, Hct, MCV, MCH, MCHC and PLT in the exposed group were within normal ranges. In biochemical examination(GOT, GPT, ALP, U-A and LDH) most of the items were within normal ranges. From this surveys conducted on 23 dry-cleaning establishments, the complaint rates of the exposed group to PCE in several subjective symptoms were higher than those of the unexposed group, and PCE exposure levels in all dry-cleaning establishment were below the Koera standard 50.0ppm. In hematological and biochemical examination the significant abnormalities by occupational exposure to PCE were not observed. However, the workers employed in dry-cleaning establishments are always faced with risk, becauses they are also exposed to several organic solvents used to remove stains. Therefore, various measures to improve occupational environment in dry-cleaning establishment should be considered.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.3 no.1
• /
• pp.17-22
• /
• 2000

Purpose: This study was conducted to evaluate the association between H. pylori infection and socioeconomic status and to determine the current prevalence of H. pylori infection in Korean adolescents. Methods: A structured questionnaire was sent to the children's parents to obtain demographic information on the parents and environmental information. Of the 532 questionnaires sent out, 375 (70.5%; 170 girls and 205 boys) were returned. Their ages ranged from 10 to 15 years (mean, 12.9 years). After collecting blood samples, we measured serum IgG antibody to H. pylori using ELISA method. The association of risk factors such as age, sex, socioeconomic class, type of house, and crowding index with H. pylori infection were analyzed by multiple regression analysis. Socioeconomic status was estimated from the parents' education and occupation using a modified Hollingshead index. Results: The prevalence rate of H. pylori infection was 16.8% (63/375). It increased with age (10.3% at 10~11 years, 15.9% at 12~13 years, and 20.7% at 14~15 years). The H. pylori infection was inversely related to the socioeconomic class (6.3% for the upper class, 16.0% for the middle class, and 20.0% for the lower calss). Crowding condition and type of house did not affect significantly on seroprevalence of H. pylori infection. After logistic regression, we found that the odds ratio for age was 2.2 (95% confidence interval 0.9~5.4), and for socioeconomic status, 3.6 (95% confidence interval 0.5~28.9). Conclusion: The prevalence of H. pylori infection in Korean adolescents was 16.8%. It related inversely to socioeconomic status but was not statistically significant. Socioeconomic status based on parents' education and occupation seemed to affect more on H. pylori seroprevalence than crowding or type of house did.

• Korean Journal of Soil Science and Fertilizer
• /
• v.37 no.4
• /
• pp.228-234
• /
• 2004

In organic farming, nutrients for the crop production are mostly supplied by compost containing various organic materials. The long-term organic cultivation would result in continuous changes of soil chemical properties and fertility. The aim of this study was to investigate the contribution of long-term organic cultivation to the soil fertility in Korea focusing on the chemical properties of soil. Soil samples were collected from organic farms that had been cultivated for 8-10 years after certification of organic product through the conversion periods of 2-3 years. Thereby each organic farm had acquired optimal cultivating techniques and soil condition. We separated organic farms into three groups by cultivating crops, i.e. leaf vegetables, fruit vegetables and fruit trees. In each group, five representative farms were chosen in order to investigate the relationships between application rate of compost and nutrient contents in soil. The application rate of compost was approximately $10-15Mg\;10a^{-1}$ for the first 2-3 years at the beginning of organic farming and then reduced to a rate of $3-4Mg\;10a^{-1}$ after stabilization of organic matter content in soil with $30-50g\;10a^{-1}$. However, the continuous organic farming for 8-10 years resulted in accumulation of nutrients, especially of P, in soil probably due to the excessive amounts of compost applied. In conclusion, we suggest that the application rate and organic sources of compost should be decided on the basis of P content in soil by soil testing and thereafter the lack of soil N content for crop cultivation should be compensated by crop rotation with such as legumes. This might be an approach to the original meaning of organic farming as an environmental friendly agriculture.

• Korean Journal of Soil Science and Fertilizer
• /
• v.25 no.3
• /
• pp.220-230
• /
• 1992

Soil temperature is one of the important environmental factors which control all the physical, chemical and biological processes in soil including germination and root growth of plants and other organisms living in the soil ecosystem. Soil water and nutrient availability and mobility are temperature dependent. Soil temperature change is depended primarily upon energy exchange in soil surface, meteorological variance and physical properties of the soils which are closely related to heat transfer mechanism. In this study physical properties including bulk density, soil texture and organic matter content were measured and thermal diffusivity on the soils was calculated. Soil samples from the 66 meteorological stations under the Korea Meteorology were collected and the physical parameters were measured. To obtain relationship between thermal diffusivity and soil water content a heat probe thermal diffusivity measurement apparatus was designed and used in this experiment. According to the survey on soil physicsal properties on the 66 meteorological stations, the 52% of the surface soil texture were sandy loam and laomy sand or sand, 38% were loam and silty loam, and 10% were clay loam and silty clay loam. The bulk density which was closely related with thermal properties showed average of $1.41g/cm^3$ for sandy soils, $1.33g/cm^3$ for loam and silty loam soils, and $1.21g/cm^3$ for clay loam and silty clay loam soils. The apparent thermal diffusivity of the upper layer from 0 to 30cm ranged from 1.16 to $8.40{\times}10^{-3}cm^3/sec$ with average of $3.53{\times}10^{-3}cm^3/sec$. The apparent thermal diffusivities of the Jeju soils of which organic matter contents were high and the bulk densities were low were near $2{\times}10^{-3}cm^3/sec$. The thermal diffusivity of snow measured in Chuncheon ranged from 0.822 to $2.237{\times}10^{-3}cm^3/sec$. The damping depth calculated from the thermal diffusivity ranged from 5.92 to 13.65cm for daily basis and 124 to 342cm for yearly basis. The significant regression equation to estimate thermal diffusivity with bulk density and soil water content was obtained by the heat probe in laboratory.

• Journal of Korean Society for Atmospheric Environment
• /
• v.10 no.E
• /
• pp.332-342
• /
• 1994

Hierarchical cluster and factor analyses were used to identify various influences on free tropospheric air samples at Mauna Loa Observatory in Hawaii during MLOPEX. The cluster analysis separated thirteen chemical and meteorological variables into three characteristic groups (1)clean air, (2)anthropogenically influenced air, (3)marine and volcanic influenced air. The cluster analysis results compared well with those of factor analysis. Six independent components were identified in factor analysis. We have related these components to (1)volcano influenced air, (2)stratosphere-like air, (3)boundary-layer air with recent anthropogenic influence, (4)photochemical haze, (5)marine boundary- layer air, and (6)modified marine tropospheric air. Excluding local influence, we could calculate the nighttime free tropospheric values for $O_3$(41$\pm$10 ppbv), HN $O_3$(94$\pm$45 pptv), N $O_3$$^{[-10]}$ (16$\pm$10 ppbv), S $O_4$$^{[-10]}$ (60$\pm$0 pptv), N $H_4$$^{＋}$(71$\pm$6 pptv), N $a^{＋}$(5$\pm$1 pptv), PAN(13$\pm$9 pptv), MeN $O_3$(3.5$\pm$1.5 pptv), 2-butyl N $O_3$(0.6$\pm$0.1 pptv), $H_2O$$_2$(1015$\pm$44 pptv), $C_2$C $l_4$(3.3$\pm$0.1 pptv), condensation nuclei(249$\pm$13c $m^{-3}$), and dew point(-8.5$\pm$5.3$^{\circ}C$) during this experiment..

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2000.04a
• /
• pp.9-10
• /
• 2000

An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.19 no.4
• /
• pp.339-346
• /
• 1986

A study on eutrophication in the downstream of the Nakdong River was conducted from October 1983 to September 1984. Nutrients concentration of the samples in this area was usually high and the nitrogen ratio to the phosphorus was as very high as $63.5{\sim}119.6$. The concentration of nutrients was in the range of $0.22{\sim}173{\mu}g-at/l$ for ammonia nitrogen, $26.7{\sim}187{\mu}g-at/l$ for nitrate nitrogen, $1.07{\sim}8.22{\mu}g-at/l$ for nitrite nitrogen, $58.7{\sim}231{\mu}g-at/l$ for total inorganic nitrogen and $0.44{\sim}4.43{\mu}g-at/l$ for phosphate phosphorus. The concentration of chlorophyll-a was in the range of $1.8{\sim}75.2\;mg/m^3$. Correlationship between concentration of nutrients and chlorophyll-a was not found. The concentrations of total suspended solid were in the range of $10.7{\sim}45.9\;ppm$, and $16.2{\sim}35.2\%$ of the total suspended solid was consisted of volatile suspended solid. According to the state of lacustrine nutrition, the state of the downstream of Nakdong River was equivalent to the eutrophication state in term of chlorophyll-a and inorganic nitrogen, and mid-nutritional state in term of phosphate.

• The Korean Journal of Pesticide Science
• /
• v.16 no.3
• /
• pp.202-208
• /
• 2012

A high-performance liquid chromatographic (HPLC) method was developed to determine residues of cyromazine, a triazine insecticide, in agricultural commodities. Cyromazine was extracted with 90% aqueous methanol from representative crops which comprised brown rice, oyster mushroom, oriental melon, watermelon, and Chinese cabbage. Following to evaporation of methanol in the extract, the aqueous concentrate was acidified to form the protonated cyromazine. Dichloromethane partition was then applied to remove nonpolar co-extractives in the aqueous phase. Strong cation-exchange chromatography using Dowex 50W-X4 resin was employed for final purification of the extract. Cyromazine was successfully separated on a Zorbax SB-Aq $C_{18}$ column showing high retention for polar compounds. Cyromazine was sensitively quantitated by ultraviolet absorption at 214 nm. Limit of quantitation (LOQ) of the method was 0.04 mg/kg irrespective of sample types. Each crops were fortified at 3 different concentrations of cyromazine for recovery test. Mean recoveries from samples fortified at LOQ~2.0 mg/kg in triplicate ranged 80.2~103.3% in five agricultural commodities. Relative standard deviations in recoveries were all less than 6%. A selected-ion monitoring LC/MS method with electrospray ionization in positive-ion mode was also provided to confirm the suspected residue. The proposed method was reproducible and sensitive enough to routinely determine and inspect the residue of cyromazine in agricultural commodities.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2000.11a
• /
• pp.44-63
• /
• 2000

Situated close to Heathrow Airport, and adjacent to the M4 and M25 Motorways, the site at Axis Park is considered a prime location for business in the UK. In consequnce two of the UK's major property development companies, MEPC and Redrew Homes sought the expertise of Intergeo to remediate the contaminated former industrial site prior to its development. Industrial use of the twenty-six hectare site, started in 1936, when Hawker Aircraft commence aircraft manufacture. In 1963 the Firestone Tyre and Rubber Company purchased part of the site. Ford commenced vehicle production at the site in the mid-1970's and production was continued by Iveco Ford from 1986 to the plant's decommissioning in 1997. Geologically the site is underlain by sand and gravel, deposited in prehistory by the River Thames, with London Clay at around 6m depth. The level of groundwater fluctuates seasonally at around 2.5m depth, moving slowly southwest towards local streams and watercourses. A phased investigation of the site was undertaken, which culminated in the extensive site investigation undertaken by Intergeo in 1998. In total 50 boreholes, 90 probeholes and 60 trial pits were used to investigate the site and around 4000 solid and 1300 liquid samples were tested in the laboratory for chemical substances. The investigations identified total petroleum hydrocarbons in the soil up to 25, 000mg/kg. Diesel oil, with some lubricating oil were the main components. Volatile organic compounds were identified in the groundwater in excess of 10mg/l. Specific substances included trichloromethane, trichloromethane and tetrachloroethene. Both the oil and volatile compounds were widely spread across the site, The specific substances identified could be traced back to industrial processes used at one or other dates in the sites history Slightly elevated levels of toxic metals and polycyclic aromatic hydrocarbons were also identified locally. Prior to remediation of the site and throughout its progress, extensive liaison with the regulatory authorities and the client's professional representatives was required. In addition to meetings, numerous technical documents detailing methods and health and safety issues were required in order to comply with UK environmental and safety legislation. After initially considering a range of options to undertake remediation, the following three main techniques were selected: ex-situ bioremediation of hydrocarbon contaminated soils, skimming of free floating hydrocarbon product from the water surface at wells and excavations and air stripping of volatile organic compounds from groundwater recovered from wells. The achievements were as follows: 1) 350, 000m3 of soil was excavated and 112, 000m3 of sand and gravel was processed to remove gravel and cobble sized particles; 2) 53, 000m3 of hydrocarbon contaminated soil was bioremediated in windrows ; 3) 7000m3 of groundwater was processed by skimming to remove free floating Product; 4) 196, 000m3 of groundwater was Processed by air stripping to remove volatile organic compounds. Only 1000m3 of soil left the site for disposal in licensed waste facilities Given the costs of disposal in the UK, the selected methods represented a considerable cost saving to the Clients. All other soil was engineered back into the ground to a precise geotechnical specification. The following objective levels were achieved across the site 1) By a Risk Based Corrective Action (RBCA) methodology it was demonstrated that soil with less that 1000mg/kg total petroleum hydrocarbons did not pose a hazard to health or water resources and therefore, could remain insitu; 2) Soils destined for the residential areas of the site were remediated to 250mg/kg total petroleum hydrocarbons; in the industrial areas 500mg/kg was proven acceptable. 3) Hydrocarbons in groundwater were remediated to below the Dutch Intervegtion Level of 0.6mg/1; 4) Volatile organic compounds/BTEX group substances were reduced to below the Dutch Intervention Levels; 5) Polycyclic aromatic hydrocarbons and metals were below Inter-departmental Committee for the Redevelopment of Contaminated Land guideline levels for intended enduse. In order to verify the qualify of the work 1500 chemical test results were submitted for the purpose of validation. Quality assurance checks were undertaken by independent consultants and at an independent laboratory selected by Intergeo. Long term monitoring of water quality was undertaken for a period of one year after remediation work had been completed. Both the regulatory authorities and Clients representatives endorsed the quality of remediation now completed at the site. Subsequent to completion of the remediation work Redrew Homes constructed a prestige housing development. The properties at "Belvedere Place" retailed at premium prices. On the MEPC site the Post Office, amongst others, has located a major sorting office for the London area. Exceptionally high standards of remediation, control and documentation were a requirement for the work undertaken here.aken here.