• Environmental Engineering Research
• /
• 제21권3호
• /
• pp.233-240
• /
• 2016

The research aims to study the different flexible rubber tube diffusers used in urban wastewater treatment processes and aquaculture systems. The experiment was conducted in small-scale aeration tank with different physical properties of the tubes that were used as aerators. The volumetric mass transfer coefficient ($k_La$), oxygen transfer efficiency (OTE) and aeration efficiency (AE) were measured and determined to compare the diffusers. Moreover, the bubble hydrodynamic parameters were analyzed in terms of bubble diameter ($d_B$) and rising velocity ($U_B$) by a high speed camera (2,000 frames/s). Then the interfacial area (a) and liquid-side mass transfer coefficient ($k_L$) can be calculated. The physical properties (tube wall thickness, tensile strength, orifice size, hardness and elongation) have been proven to be the key factor that controls the performance (kLa and OTE). The effects of hardness and elongation on bubble formation, orifice size and a-area were clearly proved. It is not necessary to generate too much fine bubbles to increase the a-area: this relates to high power consumption and the decrease of the kL. Finally, the wall thickness, elongation and hardness associated of the flexible tube diffuser (tube No. 12) were concluded, to be the suitable properties for practically producing, in this research.

• Environmental Analysis Health and Toxicology
• /
• 제20권4호통권51호
• /
• pp.259-271
• /
• 2005

Engineered nanoparticles exhibit a variety of unique and tunable chemical and physical properties. These unique properties make the nanoparticles central components and widespread potential applications in nanoindustry. However, the potential toxicities of nanoparticles have not been fully evaluated. Recently, the impacts of nanoparticles to human and environment became the emerging issue of toxicology. In this article, physicochemical properties and toxicities of carbon nanotube, fullerene, quantum dots, and other types of nanomaterials were reviewed and the strategy of risk assessment were suggested based on the frame of chemical assessment.

• Environmental Analysis Health and Toxicology
• /
• 제30권sup호
• /
• pp.4.1-4.7
• /
• 2015

Objectives Approximately 2000 phase-in substances are subject to registration according to the Act on the Registration and Evaluation, etc. of Chemical Substances (K-REACH), and the expected testing cost is 2.06 trillion Korean won assuming all the test data required for registration are acquired. The extent to which these enormous test costs can be reduced depends on the availability of existing data that can be used to meet the requirements of the K-REACH we examined the current availability of test data that can be used for chemical substance registration. Methods We analyzed the possibility of utilizing the existing test data obtained from 16 reference databases for 369 of 518 kinds of phase-in substances subject to registration that were reported in last October 2014. Results The physical and chemical properties were available for 57.1% of substances, whereas data regarding human hazards and environmental hazards were available at considerably lower rates, 8.5% and 11.8%, respectively. Conclusions Physical and chemical properties were available for a fairly high proportion, whereas human hazards and environmental hazards were reported for considerably fewer substances.

• Asia pacific journal of information systems
• /
• 제8권2호
• /
• pp.1-18
• /
• 1998

As the management and preservation of the environment become an important social issue, information required to support environmental task is required. So, there is an increasing demand for environmental information and appropriate systems to manage it. The vast volume of environmental data is distributed in different knowledge domains and systems. Environmental data objects have the complex structure containing environmental quality data and attribute data. Environmental information systems must be able to address these properties. This research has aimed at constructing well-defined schema design of environmental data, and making system architecture that environmental data kept by authorities should be made available to the public user. There are 3 major components in environmental information systems architecture ; User interface, Catalog libraries, Communication Provider. Web browsers provide consistent and intuitive user interfaces on Internet. The communication provider is a collection of diverse CGI functions. The main roles of the CGIs are to build interfaces between the Web, databases. Catalog libraries is libraries of various matadata including administration matadata. Administration matadata support the environmental administration and the managerial aspects of environmental data rather than explain a database itself or its properties.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2009년도 정기 학술발표대회
• /
• pp.55.1-55.1
• /
• 2009

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2011년도 춘계학술발표회 논문집
• /
• pp.251-263
• /
• 2011

This study was carried out in order to investigate the effect of pre-coating layer on top-coating layer. The coated paper with five different formulations were prepared. The properties of coated paper were measured and correlation between pre and top-coated layer was evaluated. Paper gloss was increased with addition of clay and GCC that has smaller particle size. Roughness was decreased with using smaller particle GCC, clay and talc. The highest thickness was obtained with talc. Brightness and whiteness of pre-coated layer were affected to top-coated layer. GCC 60 shows the highest and ununiform water adsorption during 1sec. The adsorption was higher with increasing coated weight. Talc shows the excellent water adsorption properties due to its wettability. These results indicate that final printability and properties of top coating layer can be controlled with adjusting pre-coating layer.

• 한국환경과학회지
• /
• 제25권12호
• /
• pp.1701-1715
• /
• 2016

This study is a basic investigation of the contents and services relevant to the domestic vacation house business. In which, the trade scale, types of housing, and environmental conditions of various property locations were analyzed. The characteristics of properties listed on the Japanese website that conducts the greatest volume of vacation house trade in Japan were examined, and the following results were obtained: Villa areas, villas, and resort condos (resort mansions) are the three basic types of properties handled in the vacation house trade. In this market, sales per unit in villa areas and per spaces in resort condos accounted for the highest volume of trade, followed by that of villas (individual houses). In terms of land area, floor area, and sales price per house type, the relatively cheaper small and medium-sized vacation houses are more frequently traded, than expensive large-scale villas. In particular, small multi-family type villas (such as in resort condos) are the most popular. Land and floor area, and sales prices all show considerable variation depending on the type of property considered. Therefore, a business initiative to provide a more detailed classification of properties is required. In terms of the environment of vacation properties, most are located on coasts, plateaus, or inland mountains, and are generally within three-hours' traveling distance of large cities.

• Journal of the Korean Wood Science and Technology
• /
• 제41권2호
• /
• pp.134-140
• /
• 2013

UV curing was introduced via a chemical treatment by adding small amounts of a hexafunctional acrylic monomer and a photoinitiator to improve the mechanical properties of PLA. This study also employed a semi-interpenetrated structured polymer network through the process of UV-curing. The UV curing behaviors were investigated using FTIR-ATR spectroscopy and gel fraction determination. Also, the tensile strength was investigated with different hexafunctional acrylic monomer contents and UV doses. The results showed that the crosslinking of UV-induced chemically treated PLA started at a low content of hexafunctional acrylic monomer, resulting in a significant improvement of the mechanical properties compared to those of neat PLA due to crosslinking.

• 한국환경과학회지
• /
• 제8권1호
• /
• pp.61-67
• /
• 1999

Silicone oil has organic and inorganic properties, and its skeleton is polysiloxane bonding that silicon is bonded hydrogen or organic group. Silicone compounds are very smooth and lubricant properties by low surface tension, low temperature dependence, and nonadhesive properties. Because of these properties, silicone compounds are used as many parts of chemicals, softener, smooth and libricant agents, water-repellent agent, and defoaming agent, etc. Emulsion was prepared with the inversion emulsification method which adopted the agent-in-oil method dissolving the polyoxyethylene(7) tridecyl ether(HLB 12.2) into methoxy terminated poly(dimethyl-co-methyl amino) siloxane and hydroxy terminated poly(dimethyl-co-methyl amino) siloxane in water. At this time, processed emulsion was almost microemulsion. When ratio of emulsifier increases, emulsion is stable bacuause microemulsion is solubilized by emulsion drop size and zeta-potential are decreased. But, when amount of electrolyte is increase, emulsion became unstable because emulsion drop size is increased.

• Journal of the Korean Wood Science and Technology
• /
• 제35권2호
• /
• pp.39-50
• /
• 2007

The purpose of this study was to investigate the physico-mechanical properties and characteristics on reduction of formaldehyde and total volatile organic compound (TVOC) emission from particleboard (PB) with added volcanic pozzolan. Pozzolan was added as a scavenger at the level of 1, 3, 5, and 10 wt.% of urea formaldehyde (UF) resin for PB manufacture. The moisture content, density, thickness swelling, water absorption and physical properties of PBs were examined. Three-point bending strength and internal bond strength were determined using a universal testing machine. Formaldehyde and TVOC were determined by desiccator and 20L small chamber methods. With increasing pozzolan content the physical and mechanical properties of the PBs were not significantly changed, but formaldehyde and TVOC emissions were decreased. Because pozzolan has a rough and irregular surface with porous form, it can be used as a scavenger for PBs at a content up to 10 wt.% without any detrimental effect on the physical and mechanical properties.