• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.5A
• /
• pp.369-378
• /
• 2011

In this paper, the response analysis of RC(Reinforced Concrete), SC(Steel-Plate Concrete) containment buildings subjected to a large aircraft impact is performed using Autodyn-3D as Hydrocode. Until now, the impact load in the analysis of aircraft impacts has been applied to target structures at the local area by using the impact load-time history function of Riera. However in this paper, the results of aircraft crash are analyzed by using an aircraft model similar to Boeing 767 and verified by comparing the generated history of the aircraft crash against the rigid target with another history by using the Riera's function. To estimate the resistivity of the impact, the response and safety of SC containment buildings, this study is performed by comparing the four cases of plane concrete, reinforced concrete, bonded containment liner plate at reinforced concrete, and SC structure. Thus, the different behaviors between SC and RC structures when they are subjected to the extreme impact load could be anticipated. Consequently, the improved safety is expected by replacing RC structure with SC structure for nuclear power plants.

• Journal of the Korean Geographical Society
• /
• v.47 no.5
• /
• pp.735-754
• /
• 2012

Korean society in the 2000 has experienced new many social and spatial issues such as the process of neoliberalism and changes in urban and spatial policies, the development of information and communication technology and reconfiguration of informational social space, radically increasing foreign immigrants and transformation to multicultural society, global warming and environmental injustice, and these new issues have promoted development of social geography in Korea. In addition to a review on them, this paper provides a review on empirical researches on traditional issues which have been dealt with in social geography in the 2000 in Korea. Even though there have been numerous sub-issues, they can be divided into two categories: one is urban and communal social geography including urban housing and residential segregation, urban social problems such as poverty, crime, education, health care, social welfare, urban and rural community building, identity, sense of place, and social movement; the other is social geography of population and migration, including population movement, aged society and social welfare for elderly people, and foreign immigrants and formation of multicultural social space. As some difficult conditions such as path-dependent process of neoliberalism, transformation toward informational, aged, and multicultural society would continue, so social geography in Korea to tackle with these external conditions should deepen its theoretical insights and widen its research issues.

• Fire Science and Engineering
• /
• v.33 no.6
• /
• pp.165-172
• /
• 2019

This study presents the design and manufacture of a self-contained breathing apparatus SCBA wireless communication module with a multipoint simultaneous full-duplex communication system to enable communication between team members wearing the SCBA system. It is necessary for fire-fighters to wear the SCBA system during extinguishing and rescue work at the fire site. Evaluation of the team communication module confirmed the feasibility of communication over more than 500 m in the test condition based on the line of sight. By implementing the Ad-hoc function, it was confirmed that the communication distance could be extended to 128 m by automatic routing up to 3 hoc. The vertical distance inside the building for successful communication was up to the 5th floor in the open staircase and up to the 3rd floor in the partitioned staircase. Furthermore, the performance testing of the communication module assuming a fire situation, confirmed that five team members correctly recognized the standard abbreviation of fire and wireless communication without a separate PTT key operation. In addition, the flame resistance was verified by exposing the module to a flame at 950 ± 50 ℃ for 5 s and then immediately extinguishing the flame.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.6
• /
• pp.691-702
• /
• 2019

Flood inundation map has various important roles in terms of municipal planning, timely dam operation, economic levee design, and building flood forecasting systems. Considering that the riparian areas adjacent to national rivers with high potential flood vulnerability conventionally imposed special cares to justify applications of recently available two- or three-dimensional flood inundation numerical models on top of digital elevation models of dense spatial resolution such as LiDAR irrespective of their high costs. On the contrary, local streams usually could not have benefits from recent technological advances, instead they inevitably have relied upon time-consuming manual drawings or have accepted DEMs with poor resolutions or inaccurate 1D numerical models for producing inundation maps due mainly to limited budgets and suitable techniques. In order to efficiently and cost-effectively provide a series of flood inundation maps dedicatedly for the local streams, this study proposed an OpenGIS-based flood mapping tool named Open Flood Mapper (OFM). The spatial accuracy of flood inundation map derived from the OFM was validated throughout comparison with an inundation trace map acquired after typhoon Nari in Hancheon basin located in Jeju Island. Also, a series of inundation maps from the OFM were comprehensively investigated to track the burst of flood in the extreme flood events.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.2
• /
• pp.32-43
• /
• 2014

To identify major causes of the global environment changes arising from extreme and unusual weather patterns occurring these days, and to foresee future environmental changes, it is highly important to shed light on the correlation between climate changes and global environment system. To investigate the correlation between climate changes and global environment system, it calls for establishing an integrated climate-environment DB for analyzing comparatively the data on climatic changes and global environment system. In the preceding studies, we researched an XML-based integrated climate-environment DB and developed a management system for the DB. However, the existing integrated climate-environment DB, designed and installed only for individual PCs, does not allow multiple users 'simultaneous access. Accordingly, it fails to systematically update and sharing data which is being generated continuingly. Hence, this study aims to develop an easy-to-use GIS-based integrated DB management system by improving the existing integrated climate-environment DB through the adoption of the client/server model. For this, this study collected and analyzed climate and environment data prior to designing and building a DBMS-based integrated DB. In addition, in order for multidisciplinary researchers to easily get access and apply the integrated DB, this study designed and developed a GIS-based integrated DB management system using a client/server model which facilitates connections with multiple PCs. The GIS-based integrated climate-environment DB management system makes it easier to efficiently manage and locate scattered climate-environment data. It is also expected that the DB system will bring the effects in saving time and cost by avoiding the overlapping generation of data in the areas of integrated climate-environment research.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.2
• /
• pp.497-505
• /
• 2017

TDF (Tire derived fuel) Fly ash is an industrial by-product when scraped tire was used a fuel source at the power plant. TDF Fly ash has been classified as domestic waste at the workplace so far and has not been appropriately utilized. We conducted a fundamental physical property test of asphalt mixture to investigate the possibility of using TDF Fly ash as a mineral filler of asphalt mixture for exploring new usage strategies. TDF Fly ash meets KS F 3501 asphalt mixture mineral filler criteria. And the optimal asphalt binder amount was determined to be 4.5% by Marshall design. Mineral filler content was determined at 3% and analyzed by comparing using mineral filler as stone powder. The basic physical property test of the asphalt mixture was evaluated to the provision indicated in "Production and Construction Guidelines for Asphalt Mixture" published by the Ministry of Land, Infrastructure and Transport. In the test, Marshall stability test, dynamic immersion test, tensile strength ratio test, wheel tracking test were carried out. As a result of the experiment, Marshall stability and dynamic stability satisfied the standards, and confirmed the stability and Dynamic immersion and tensile strength ratio test that TDF Fly ash is more effective for scaling and moisture resistance than stone dust. Therefore, in this research, it is expected that multilateral utilization of TDF Fly ash, and a positive effect can be also expected.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.5
• /
• pp.527-534
• /
• 2020

A significant factor in construction work is cost. At early- and advanced-stage design, costs should be calculated to derive realistic cost estimates according to unit price calculation. Based on these estimates, the economic feasibility of construction work is assessed, and whether to proceed is determined. Through the Korea Institute of Civil Engineering and Building Technology, the construction cost index has been calculated by indirect methods after both the producer price index and construction market labor have been reprocessed to easily adjust the price changes of construction costs in Korea, and the Institute has announced it since 2004. As of January 2000, however, the construction cost index was released, and this has a time constraint on the correction and use of past construction cost data to the present moment. Variables were calculated to compute a rough construction cost that utilized past construction costs through surveys of the producer price index and the construction market labor force consisting of the construction cost index. After significant independent variables among the many variables were selected through correlation analysis, the construction cost index from 1970 to 1999 was calculated and presented through multiple regression analysis. This study therefore has prominent significance in terms of proposing a method of calculating rough construction costs that utilize construction costs that pre-date the 2000s.

• Journal of the Korea Concrete Institute
• /
• v.28 no.5
• /
• pp.509-517
• /
• 2016

In terms of bridge construction, the concrete deck slab is weak members compared to beam members of the bridge supports. Deck slabs must be sound to support and distribute vehicle loads. If slabs are not enough to support the loads, it should be replaced. Bridge deck replacement has been an important industry over the world since the construction is simplified to shorten construction time and to save construction costs. Slab module provides a quickly, easily and reliably construction method in order to avoid high cost and minimum traffic disruption. in addition, slab module shows high reliability since they are factory products. However, slab module should be considered in the performance under various loads. In this study, structural analysis is performed to evaluate the performance of slab module under vehicle loads and temperature loads. Spiral rebar is also utilized around the vertical joints to improve the structural integrity under the lifting loads. In order to confirm the weak area of slab module for the lift condition, numerical analysis has been performed.

• Journal of Distribution Science
• /
• v.12 no.11
• /
• pp.55-65
• /
• 2014

Purpose - This study aims to investigate the process of political changes in Japan, which has introduced regulatory policies for large-scale retail stores since the 1930s, as well as the examples, and suggests improvement schemes for our policies in Korea, which imposes restrictions on business hours and forced holidays in accordance with the current Distribution Industry Development Act. Research design, data, and methodology - After examining the political change processes related to large-scale retail stores in japan, this study analyzes individually regulated cases based on the ordinances enacted by each local government. Through case analysis in Japan, this study makes political suggestions that may be helpful for our country substantially. Results - Since there is an obvious possibility that our economic restrictions on business hours and mandatory holidays do not coincide with WTO GATS, it is necessary for large-scale distributors to introduce new social and environmental regulations similar to Japan, rather than imposing controls to restrict free competition and also introduce a policy to induce cooperation with small businesses for the advancement of the distribution industry. Thus, it is desirable to take measures on noise, waste, traffic, and parking for the preservation of the living environment in the surroundings when building new large-scale retail stores. It is also important to establish measures to improve the welfare of neighborhood residents and consumers, create a pleasant urban environment, and make it mandatory to make presentations at public hearings among residents. Furthermore, it should be mandatory to establish regional contribution plans when a retail store is established, and take measures to solve various civil complaints or problems that may occur after entering the market. Moreover, it is desirable for large-scale retail stores that entered the market to induce cooperation in performing various activities in the area with a strong sense that they are all members of the local economy. Conclusions - If introducing social regulations like in Japan, there is probably an advantage that the conflicts seen when large-scale retail stores enter the market are absorbed by adjusting the persons concerned within the established institution in order to establish a field to solve such conflicts systematically. In contrast, there are still concerns regarding chaotic operation without any active attempts to have a conversation with large-scale retail stores and local small merchants due to a sharp conflict among the persons concerned, and if it is a briefing session without any decision of the restrictions on their opening itself, there may be doubts with regard to their effectiveness. Moreover, if the de facto opening is restricted by the introduction of such a briefing session procedure, the choice of whether to protect the existing rights of large-scale retail stores might become problematic. However, such problems could be minimized in a way by forming a separate consultative group for all persons concerned including residents, local governments, professionals, civic organizations, small merchants, and massive retail store-related persons.

• Journal of the Korea Concrete Institute
• /
• v.25 no.6
• /
• pp.631-639
• /
• 2013

Non-linear finite element analysis for newly developed precast concrete details for beam-to-column connection which can be used in moderate seismic region was carried out in this study. Developed precast system is based on composite structure and which have steel tube in column and steel plate in beam. Improving cracking strength of joint under reversed cyclic loading, joint area was casted with ECC (Engineering Cementitious Composites). Since this newly developed precast system have complex sectional properties and newly developed material, new analysis method should be developed. Using embedded elements and models of non-linear finite element analysis program ABAQUS previously tested specimens were successfully analyzed. Analysis results show comparatively accurate and conservative prediction. Using finite element model, effect of axial load magnitude and flexural strength ratio were investigated. Developed connection have optimized performance under axial load of 10~20% of compressive strength of column. Plastic hinge was successfully developed with flexural strength ratio greater than 1.2.