• 한국환경과학회지
• /
• 제13권1호
• /
• pp.99-107
• /
• 2004

This research is to determine the level of environmental pollution at a blasting construction area which is the origin of noise, vibration, and suspended particle, and to compare the results with other domestic and international standard data. This experiment is also to find out the effects resulting from blasting construction and to propose a plan that can decrease environmental pollution. The blasting construction area is a factory site which is about one and half million square meter and sewage disposal plant is about ninety thousand square meter. Both were selected as the areas for the tests to be conducted in determination test. The test to determine the level of noise, vibration, and total suspended particle was conducted thirty times around the blasting construction area by comparing measurement results and numerical analysis. However, as the test was not conducted in the laboratory but in the actual blasting construction area, it was not possible to do the test with the same exact conditions each true. Therefore, the test was not ideal as conditions could change from test to test. For the most part, the level of noise was below the standard level of 70dB. Every vibration test was under the standard limitation. For example, a house, 200m away was tested for noise and vibration and the level was found to be under the 0.2 cm/sec which is the standard for specialty designed cultural sites., i.e very low level. Also a buried oil pipeline that was 30m away also marked under 2.0cm/sec which is the norm for an industrial area. However, if there were an oil pipeline under the house, the amount of charging gunpowder per hole should be decreased compared to the amount used in the test. The test result for suspended particles under the standard limitation which is 24hour average 300$\mu\textrm{g}$/㎥ at a distance from blasting wavelength, but at detonator, total suspended particle from the blast origin exceeded the standard limitation. If explosion occurs when it detonates in the hole, most of the energy would be absorbed in the crushing of rocks, but some remaining energy would make noises and vibration inevitable. So the important thing is how to minimize the environmental pollution from the blasting. There should be regulations in order that the standard limitation is not exceeded, and to decrease the environmental pollution from the blasting.

• 한국소음진동공학회논문집
• /
• 제21권9호
• /
• pp.820-827
• /
• 2011

Recently, noise has been regarded as one of the most notorious and frequent environmental pollutions which can be often encountered not only in the living space but also in the industrial site. Studies on physiological and psychological effects of long-term noise exposure to human being have commanded the public interest on noise issues. Since environmental noises such as traffic noise and construction noise is mainly flowed through the open window, it is necessary to develop the active noise control system to reduce it inside the building. Although control speakers and microphones for the noise signal measurement in the control region are essential for the conventional active noise control methods, it is impossible to implement them in the control region in the building environment because the control region is the living quarter and they may hinder activities of the residents. Therefore, we proposed the active window system to reduce the exterior noise flowed through the open window with microphones installed outside the window and control speakers installed at the frame of the window. To confirm the performance of the proposed active window, we carried out the simulation and experiment using active window system with 8 control speakers. Simulation results showed the noticeable noise reduction effect inside the control region within the frequency range without the spatial aliasing. Experimental result showed that the total acoustic potential energy inside the room of the scale model is reduced to about 10dB within the interest of frequency range.

• 자원환경지질
• /
• 제31권1호
• /
• pp.53-57
• /
• 1998

Transient electromagnetic (TEM) method is also affected by cultural and natural electromagnetic (EM) noises, since it uses part of the broadband ($10^{-2}$ to $10^5Hz$) spectrum. Especially, predominant EM noise which affects a moving transmitter-receiver TEM system is sensor motion-induced noise. This noise is caused by the sensor motion in the earth magnetic field. The technique for reducing the sensor motion-induced EM noise presented in this paper is based on Halverson stacking. This Halverson stacking is generally used in a time-domain induced polarisation (IP) system to reject DC offset and linear drift. According to spectrum analysis of the vertical component of sensor motion-induced noise, the frequency range affected by the motion of an EM sensor is less than about 700 Hz in this study. With the decrease of the frequency, the spectral power caused by the motion of a sensor increases. For example, at the frequency of 200 Hz, the spectral power of the sensor motion-induced noise is $-90dBVrms^2$ while the spectral power of the EM noise measured with a fixed sensor on the ground is $-105dBVrms^2$, and at the frequency of 100 Hz, the spectral power of the sensor motion-induced noise is $-70dBVrms^2$ while the spectral power of the EM noise measured with a fixed sensor on the ground is $-105dBVrms^2$. With applying Halverson stacking to an artificial noise transient generated by adding a noise-free transient to sensor motion-induced noise measured without pulsing, it is shown that the filtered transient is nearly consistent with the noise-free transient within a delay time of $0.5{{\mu}sec}$. The inversion obtained from this filtered transient is in accord with the true model with an error of 5%.

• 한국소음진동공학회논문집
• /
• 제26권1호
• /
• pp.49-54
• /
• 2016

The wind power plants were installed in many places because of the low climate changing effects since 2000. Generally, the wind power plants located in the seaside and the mountainous area and the heights of the windmills are about 40 m~140 m above the ground level. So the noises emitted from the wind power plants propagate far away compared with other environment noise sources like trains and cars noise. Because of these reasons, the noise emitted from the wind power plant is easy to cause the additional social problems like as noise complaints. Under the situation, the ministry of environment has established the guideline to evaluate the environmental effects for the wind power plant. According to the guideline, the noise of the wind power plant has to meet 55 dB(A) at daytime and 45 dB(A) at night in the residential area, which is regulated in the noise and vibration management law. But, it is difficult to estimate the noise emitted from the wind power plant because of the absence of the prediction model of the wind power plant noise. Therefore, the noise prediction model for wind power plants using the regression analysis method is developed in this study. For the development of the model, the sound pressure levels of the wind power plants in Jeju island are measured and the correlations between the sound pressure levels are analyzed. Finally, the prediction equation of the wind power plant noise using by regression analysis method derived. The prediction equation for the wind power plant noise proposed in this study can be useful to evaluate the environmental effects in any wind power plant development district.

• 한국도로학회논문집
• /
• 제17권5호
• /
• pp.19-24
• /
• 2015

PURPOSES : The noise, which is typically generated by fast moving vehicles, can be intercepted by installing a noise barrier with a soundproof panel. However, reflections from the panels cause secondary noise, and hence lower the effectiveness of the panels. In this study, the reduction of reflection noise by considering the shape, especially zigzag one, of the soundproof panel have been evaluated. METHODS : The simulation model used in this study was Nord2000, which simulates real-road situations effectively. Based on the simulation results, the joining angle of $133^{\circ}$ with the pattern width (a) equal to 2 m and the projection height (b) equal to 0.5 m was adapted in the zigzag shape as the best profit designing factors. RESULTS: The measuring results at middle height, 15 m showed reduction at all points except the point with average -1.6 dB. At a greater height of 30 m, 2 points showed reduction. A real-sized facility was constructed to investigate the reflected sound from a zigzag shaped panel up to the height of 5 m. CONCLUSIONS: The reduction effects were detected in all the receive points in the range of 2-6 m distances and 1-5 m heights comparing the plane panel. Compared to plane panel, the noises are reduced at an average of 2.4 dBA.

• 한국수자원학회논문집
• /
• 제47권2호
• /
• pp.135-143
• /
• 2014

본 연구에서는 기후변화에 따른 충주댐 유입량을 모의하였으며 이때 발생되는 불확실성을 분석하였다. GCM별 불확실성을 고려하기 위해 IPCC AR4 A2 시나리오에 의한 4개의 GCM 강수량 결과를 추계학적 모형인 TFN 모형에 적용하였다. TFN 모형의 불확실성을 고려하기 위하여 정규분포를 따르는 100개의 잡음항을 생성하여 앙상블 유입량 시나리오를 생성하였고, 결과적으로 400개의 미래유입량 시나리오를 제시하였다. 분석결과 과거 30년과 비교하여 미래에는 다른 변화율을 보였으며, 모든 시나리오에서 전 기간에 걸쳐 연 유입량 증가 양상을 보였고 여름철의 유입량 증가, 봄철의 유입량 감소가 전망되었다.

• 한국군사과학기술학회지
• /
• 제12권1호
• /
• pp.123-132
• /
• 2009

Civil petitions and law suits against the military rifle shooting noise have been increased because many military shooting ranges are located near civilian residential area. In order to solve the noise problems, military have devised various methods. In this study, propagation properties of rifle shot through atmosphere were investigated. The military rifle shooting noise level at 5m from muzzle was between $l14{\sim}120dB$ in all directions. The noise level loom both backward and sideward away from system firing range consisting lines of 8 shooting locations were 90dB, when shots were all fired within 10 seconds. At present some of military bases established sound barriers, muzzle enclosures, silencers, and indoor shooting ranges to reduce noises and these prevention methods can reduce noise by $5{\sim}20dB,\;5{\sim}9dB,\;5{\sim}13dB,\;40{\sim}50dB$, respectively. Even though indoor shooting range has the best performance, it requires very expensive construction cost and has short length between target and shooter. In comparison, muzzle enclosure is cheap, but because it is installed in fixed position it can only be used in one shooting position. Therefore a commander should select appropriate methods to reduce military rifle shooting noise considering distance from residential area to the range, mission of military training, budget, etc.

• 환경생물
• /
• 제27권4호
• /
• pp.375-383
• /
• 2009

본 연구는 경기도 고양시와 김포시 인근의 한강하구지역에 도래하여 월동하는 재두루미의 도래 및 취식지역 이용현황, 잠재식이물, 주간 일주행동 그리고 방해요인에 대한 조사를 통하여 이 지역 재두루미의 월동생태에 대한 기초자료 구축과 지속적인 서식을 위한 보전방안을 마련하기 위하여 실시하였다. 재두루미는 본 지역에서 2월 중순에 최대개체수인 162개체가 확인되었고, 3월 중순에 모두 번식지역으로 이동하였다. 월동기간 동안 한강 주변 김포시와 고양시의 농경지역인 홍도평, 이화동, 평동 그리고 송포동지역을 취식지역으로 이용하였으며, 월동지 전체의 이용가능일수(ECC)는 334일(121~909일)이었다. 재두루미는 오전에 취식지역으로 이동하여 먹이 활동을 하였으며, 방해요인이 발생하면 한강의 갯벌로 이동하여 먹이 활동을 하거나 휴식을 취했다. 일주행동은 취식, 경계, 이동, 깃다듬기, 안락, 사회 및 기타행동으로 나누어 조사 하였으며, 월동지에서는 취식의 비율이 가장 높았다. 또한 일주행동 중 취식, 경계, 이동 그리고 깃다듬기는 취식지역별로 유의적인 차이가 나타났다. 통계적으로 유의한 차이를 나타내었다. 취식지역에서 재두루미의 월동에 방해를 주는 요인은 총 348회가 관찰되었으며, 차량, 사람, 자전거 및 오토바이와 같은 인위적인 방해요인과 소음, 동물, 기타의 자연적인 요인이 있었다. 방해요인은 이화동 (134회), 홍도평 (109회), 송포동 (64회) 그리고 평동(44회)의 순으로 관찰되었으며, 인위적인 방해요인(228회)이 자연적인 방해요인(120회)에 비해 많았다. 특히, 그 중에서 차량에 의한 방해의 빈도가 가장 높았다.

• 지구물리와물리탐사
• /
• 제20권3호
• /
• pp.176-184
• /
• 2017

탄성파 탐사 영상에 적절한 평활화 기법을 적용하게 되면 무작위 잡음이 제거되고 신호의 연속성이 증가되어 보다 정밀한 해석을 할 수 있다. 자료의 특성을 해치지 않으면서 효율적으로 탄성파 탐사자료를 평활화 하기 위해서 최근까지 활발하게 연구 및 사용되고 있는 방법 중 하나가 SOF-EP (Structure-Oriented Filter-Edge Preserving) 기법이다. 이 기법은 자료의 진폭이 큰 곳에서 작은 곳으로 확산되는 원리를 이용하며, 수평층과 같은 연속성이 있는 구조에서는 층을 따라 확산 혹은 평활화가 일어나게 해줌으로써 층 내의 연속성을 증가시키고 무작위 잡음을 제거하는 효과를 가져온다. 또한, 단층과 같은 불연속적인 주요 구조 경계에서의 확산 혹은 평활화를 막기 위하여 연속성 결정 인자를 설정함으로써 평활화 기법의 정밀성을 높일 수 있다. 하지만, 연속성 결정인자를 계산하기 위하여 사용되어 온 구조지향 닮음(structure-oriented semblance) 기법의 경우, 사용하는 필터의 크기나 자료의 양에 따라 많은 시간이 소요되기 때문에 효율성이 떨어지는 한계를 가진다. 이 연구에서는 먼저 SOF-EP 기법을 구현하고, 현장자료에 단계적으로 적용함으로써 그 효용성을 확인하였으며 다음으로 효율적으로 연속성 결정인자를 계산할 수 있는 모서리 반응 기법(corner response method)을 제안 및 적용하여 기존의 방법과 비교하였다. 그 결과 약 6000배 이상 계산 시간을 단축할 수 있음을 확인하였다.

• 지질공학
• /
• 제22권4호
• /
• pp.459-466
• /
• 2012

엔지니어링 탄성파 반사법 자료에서 자주 부딪히는 문제는 천부 불연속면의 작은 반사 에너지가 발파로 인한 음파, 직접파, 굴절파 및 진폭이 큰 표면파와 같은 잡음으로 가려진다는 점이다. 자료처리 과정에서 그 동안 국내 지반탐사 자료에 적용되지 않았던 방사변환 기법을 통하여 현장에서 얻어진 거리-시간 영역의 자료를 단순히 속도-시간 영역의 자료로 변환시켜 일관성 잡음을 제거하고자 하였다. 적용성 평가를 위해 수백 미터 깊이를 대상으로하는 고품질의 퇴적분지 탐사자료와 수십 미터 깊이를 대상으로 하는 잡음이 많은 엔지니어링 탐사자료를 시험자료로 선택하였다. 이 방법은 대역통과 필터링과 주파수-파수 필터링에 비해 반사파의 진폭을 약화시키지 않고 음파, 표면파, 직접파, 굴절파와 같은 천부의 일관성 선형 잡음을 효과적으로 약화시킬 수 있었다. 방사 트레이스 영역에서 잡음의 주파수 특성을 고려하여 설계된 저주파 제거 필터를 적용할 때 표면파 분산 구간은 물론 주파수-파수 필터링에서 통제하기 힘든 직접파, 굴절파 및 음파의 중첩 구간(50m 깊이 이내)에 있는 천부 반사면들이 효과적으로 부각되었다. 일관성 있는 선형 잡음에 제한되어 적용되는 이 방법은 앞으로 속도-시간 영역에서 각 종 잡음의 분포 특성을 정확히 파악할 때 엔지니어링 자료에 흔히 나타날 수 있는 절리, 파쇄대, 천부 단층에 의한 회절파와 역-산란파와 같은 잡음도 충분히 조절할 수 있을 것으로 보인다.