• Tunnel and Underground Space
• /
• v.7 no.2
• /
• pp.116-129
• /
• 1997

The objective of this study is to predict the minimization effect of the noise and vibration during the construction and the train operation regarding to the design modification of the Taegu Subway Line No. 1. It was suggested optimal control blasting methods to reduce the causing vibration Nuance to the resident in City Taegu and also proposed the better governing method to decrease the environmental hazard to the near buildings and residents during the train operation. When the high-density gaseous reaction of explosion products exerts a high pressure in motion outward, a dynamic stress field will be created in the surrounding buildings. Therefore, in the region close to the charge, permanent damage begins to occur at a great critical level of partial velocity, that is difficult from different structure as working conditions. It is reliable to predict that the damages could be reduced if we know the peak velocity and the exact reasons through the conducting of detail studies of structural analysis of the related buildings with the optimal blasting designs. A blasting technique should be deemed to take advantage of the reduction of damage of the surrounding rocks and structures to improve the in-city blasting. This is a typical in-city blasting operation where success depends on closely controlling the ground vibrations in case of better designed blasting methods. There are techniques that can be applied to prevent large vibrations from damaging the important buildings through the Route Modification of the Taegu Subway Line No. 1.

• Journal of Korean Society on Water Environment
• /
• v.21 no.6
• /
• pp.569-574
• /
• 2005

In this study, alginic acid that had an high affinity for a heavy metal and was noted for biological adsorbent was modified by an oxidizer, $KMnO_4$. Chemical modification changed hydroxyl of the alginic acid into carboxyl and compare with alginic acid, modified alginic acid exhibited a characteristics that carboxyl groups are comparatively high. For the use of them as an adsorbent, beads were prepared by dropping alginic acid and modified alginic acid solution in dilute 2 wt% $CaCl_2$ solution for non water soluble. The amount of removed $Cu^{2+}$ and $Pb^{2+}$ by modified alginic acid beads showed 84.7 mg and 90.9 mg per gram of beads, respectively. And it showed the amount of adsorbed heavy metal ions 10~20% higher than that of alginic acid beads in range of pH 4~7. In particular, modified alginic acid have a good adsorption capacity for $Cu^{2+}$ and $Pb^{2+}$ by Freundlich adsorption isotherm. According to this study, it is verified that alginic acid that is a nature high molecular substance improved capacity for actual application by increased heavy metal adsorption capacity by chemical modification.

• Journal of Environmental Science International
• /
• v.9 no.1
• /
• pp.35-42
• /
• 2000

In this study, the movable bed model testing was carried out so as to analyze bed profile changes including predicting scouring and deposition of bed profile and to solve hydraulic problems affecting with bed and both-bank between upstream and downstream of intake weir in the Nakdong river channel. The movable bed model testing consists of fundamental test, movable model test and numerical analysis method respectively. The fundamental test was enforced to analyze relationship of discharge and sediment load in the tilting flume. When the movable model test was worked, it was shown that sediment budget between input sediment load and output sediment load was balanced exactly. As a result of movable model test, it was presented that scouring and deposition changes in quantities between the upstream and downstream of modification weir were less than those of nature and planning weir. Finally, numerical analysis method was operated by 1-dimensional bed profile changes model ; HEC-6 model so as to complement unsolving hard problems during movable model test. So, modification weir will sustained the stable bed profile changes than any other weirs in the study channel.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.3
• /
• pp.106-112
• /
• 2011

The effects of alkaline treatment on the WRV, crystalline structure and sheet structure of softwood and hardwood bleached kraft pulp were investigated. Sodium hydroxide and sodium carbonate were used as chemicals for alkaline treatment and two levels of alkali dosage (5%, 10%) were applied respectively. Alkali treated and untreated pulp were refined to three levels (550, 450 and 350 mL CSF). WRV of the alkali treated pulps depended on the alkaline type and concentration. It was found that the crystalline structures of softwood and hardwood pulp were not changed by refining. Sodium carbonate and lower concentration of sodium hydroxide treatment did not caused any modification of cellulose crystalline structure, while higher concentration of sodium hydroxide treatment caused the partial modification of cellulose crystalline structure. Alkaline treatment of hardwood bleached kraft pulp led to the shrinkage of fiber diameter and bulky structure of sheet. Alkaline treatment of softwood bleached kraft pulp did not cause the significant change in fiber shrinkage and bulk of sheet.

• Journal of Preventive Medicine and Public Health
• /
• v.39 no.1
• /
• pp.2-6
• /
• 2006

Ever since the foundation of the Korean Society for Preventive Medicine in 1947, members of the Society had made remarkable contributions to the public health development and national health promotion. They had played key roles in establishing national health system, improving environmental hygiene, controlling infectious and chronic diseases, promoting family planning, improving industrial and environmental health, and developing health service management. However, the Society had less actively responded to the changes in health service needs of the population that were caused by a rapid epidemiologic transition in last a few decades. Early detection and treatment of chronic diseases including cancer and cardiovascular diseases and risk reduction by the life style modification are major approaches to the contemporary national health problems and they are the core contents of preventive medicine. The author proposed to develop the clinical preventive medicine specialist who will have additional training in clinical medicine for health screening and life style modification to the current preventive medicine training program and thus will be able to provide comprehensive preventive medical services. Another area that the Society may take the initiative is training preventive medicine specialist in the disaster, including bioterrorism, preparedness and management. The Society should be more active in proposing health policy and health service program and also participate collectively in a large scale health research project of the government. These approaches may not only contribute more effectively to the national health promotion but also improve the identity of the Society.

• Journal of muscle and joint health
• /
• v.30 no.3
• /
• pp.218-229
• /
• 2023

Purpose: This study aimed to assess and compare the effectiveness of various fall prevention interventions in hospitals through a network meta-analysis. Methods: A network meta-analysis was conducted using the "netmeta" package in R software (v4.1), employing a frequency method. Odds ratios of fall rates and injurious fall rates were utilized to confirm the effects of interventions for fall prevention. Comparative rankings of these interventions were determined using cumulative probability (P-score). Results: Comparative rankings via cumulative probability (P-scores) revealed individualized education as the most effective intervention for fall incidence (P-Score 87.8%). Followed by fall-preventing sensors (60.9%), multicomponent interventions (47.4%), usual care (33.2%), and environmental modification (20.7%). For fall-related injuries, individualized education ranked highest (P-Score 97.1%), followed by multicomponent interventions (76.0%), usual care (47.6%), environmental modification (24.2%), and fall-preventing sensors (5.1%). Conclusion: This study provides valuable insights into the relative effectiveness of diverse interventions in preventing fall incidence through network meta-analysis. The findings aim to support nurses in making informed decisions when implementing fall prevention strategies in clinical practice.

• Journal of Korean Society on Water Environment
• /
• v.26 no.3
• /
• pp.432-438
• /
• 2010

LIDMOD2 was developed for evaluation of low impact development (LID) and best management practice (BMP) by modification of Site Evaluation Tool (SET). The modification includes employment of SCS-CN method for annual runoff simulation, unit load method for annual pollutant loads simulation, and the method proposed by Korean TMDL for calculating pollutant reduction by BMPs. The CN values were updated with regionalized parameters within Nack-Dong River basin because these are important parameters for simulating hydrology. LIDMOD2 was tested by applying to Andong Bus terminal. As a simulation results, pollutant loads and surface runoff will be significantly increased by post-development without LID compared with those from pre-development. LID technique was simulated to efficiently reduce surface runoff and pollutant load and increase infiltration. LIDMOD2 is screening level tool and easy to use because LIDMOD2 is based on spread sheet and most of parameters are regionalized. LIDMOD2 was illustrate that it could evaluate LID well by summarizing and graphing annual hydrology, annual pollutant loading, and hydrograph for event storm. The calculation methods related with pollutant loads are employed from the guideline of Korean TMDL and it can be useful tool for Korean TMDL to evaluate the effect of LID/BMP on developing area.

• Korean Journal of Soil Science and Fertilizer
• /
• v.47 no.3
• /
• pp.187-190
• /
• 2014

The agricultural policy/Environmental eXtender (APEX) model was developed by the Blackland Research and Extension Center in Temple, Texas. APEX is a flexible and dynamic tool that is capable of simulating a wide array of management practices, cropping systems, and other land uses across a broad range of agricultural landscapes, including whole farms and small watersheds. The model can be configured for novel land management strategies, such as filter strip impacts on pollutant losses from upslope crop fields, vegetated grassed waterways in combination with filter strip impacts, and land application of manure removed from livestock feedlots or waste storage ponds. The APEX model has continually evolved since its inception, and the process of adaptation and modification will likely continue as use of the model expands for an ever-increasing range of environmental problems and conditions. Several improvements to specific model subroutines have already been initiated, while other potential improvements have been identified that will require future research and code modification efforts.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.12
• /
• pp.47-55
• /
• 2009

As a conventional line-fitting method, the Bouwer and Rice method has been popularly adopted to estimate the hydraulic conductivity of an aquifer through a slug test. Because a vertical cutoff wall is usually very compressible and features a small wall thickness, the Bouwer and Rice method should be carefully applied to analyzing slug test results to estimate the hydraulic conductivity of vertical cutoff walls. In addition, a relatively impermeable layer, called a filter cake, formed at the interface between the cutoff wall and the natural soil formation makes it difficult to use the Bouwer and Rice method directly. In order to overcome such limitations, the original Bouwer and Rice method has been modified by incorporating the concept of the flow net method. In this modification, the geometry condition of cutoff walls including the filter cake is effectively considered in evaluating the hydraulic conductivity of a vertical cutoff wall.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.1 no.2
• /
• pp.48-57
• /
• 1997

The method of antiresonance frequency analysis of multi-input system is proposed. The structural dynamic modification using antiresonance frequency analysis is also applied to reduce the undertest at specimen attachment points on the fixture in environmental vibration test, which is resulted from the inconsistency of antiresonance frequencies. Several computer simulations show that the proposed method can remove the undertest problem which is not removed in conventional vibration test control. And the effectiveness of the method is verified with the impact hammer excitation of aluminium fixture model.