• New & Renewable Energy
• /
• v.16 no.4
• /
• pp.76-82
• /
• 2020

Soiling on the surface of a PV module reduces the amount of light reaching the solar cells, decreasing power performance. The performance of the PV module is generally restored after contaminants on the module surface are washed away by rain, but it accumulates at the bottom of the module owing to the thickness of the module frame, causing an output mismatch on the PV module. Since PV modules are usually installed horizontally or vertically outdoors, soiling can occur at the bottom of the PV module, depending on the installation direction due to external environmental factors. This paper is analyzed the output characteristics of a PV module considering its installation direction and the soiling area. The soiling was simulated to use transparent films with 5% transmittance, and the transmission film was attached to the bottom part of the PV module horizontally and vertically. When the soiling area was 33% of the string at the bottom of the PV module, the power output decreased similarly regardless of installation direction. However, when the soiling area was 66% of the string at the bottom of the PV module, it was confirmed that the output performance decreased sharply when installed vertically rather than horizontally.

• Wind and Structures
• /
• v.35 no.5
• /
• pp.309-322
• /
• 2022

Due to the complex terrain around high-speed railways, the windbreaks were established along different landforms, resulting in irregular windbreak transition regions between different subgrade infrastructures (flat ground, cutting, embankment, etc). In this paper, the effect of a windbreak transition on the wind flow around railways subjected to crosswinds was studied. Wind tunnel testing was conducted to study the wind speed change around a windbreak transition on flat ground with a uniform wind speed inflow, and the collected data were used to validate a numerical simulation based on a detached eddy simulation method. The validated numerical method was then used to investigate the effect of the windbreak transition from the flat ground to cutting (the "cutting" is a railway subgrade type formed by digging down from the original ground) for three different wind incidence angles of 90°, 75°, and 105°. The deterioration mechanism of the flow fields and the reasons behind the occurrence of the peak wind velocities were explained in detail. The results showed that for the windbreak transition on flat ground, the impact was small. For the transition from the flat ground to the cutting, the influence was relatively large. The significant increase in the wind speeds was due to the right-angle structure of the windbreak transition, which resulted in sudden changes of the wind velocity as well as the direction. In addition, the height mismatch in the transition region worsened the protective effect of a typical windbreak.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.6A
• /
• pp.641-650
• /
• 2009

This paper presents new equations for member forces in concrete floating structures under wave loadings. The currently adopted design equations for wave loadings disregard the effect of mismatch between design wave length and the length of the structure. In most cases, however, additional internal forces occur due to disequilibriating buoyancy caused by the difference between design wave length and the length of the structure. In this study, new design equations considering the influence of the disequlibriating buoyancy is proposed. In addition, finite element solutions are sought to demonstrate the adequacy of the proposed design formulae in estimating the actual internal forces considering the structure as either rigid or flexible. It has been found that member forces are decreased approximately to around 55% for flexible model when compared with the rigid one.

• Economic and Environmental Geology
• /
• v.36 no.3
• /
• pp.213-223
• /
• 2003

We estimated the Moho depth of Korean Peninsula from gravity anomalies and digital elevation model. The satellite radar altimetry-derived global free-air gravity model was used to ensure the homogeneity in both data and frequency domains of the original data. Two different methods were implemented to calculate the Moho depth; the wavenumber correlation analysis (Kim et al., 2000a) and the power spectrum analysis. The former method calculates depth-to-the-Moho by correlating topographic gravity effect with free-air gravity anomaly in the wavenumber domain under the assumption that the study area is not isostatically compensated. The latter one, on the other hand, considers the different density layers (i.e., Conrad and Moho), using complete Bouguer gravity anomaly in the Frequency domain of the Fourier transform. The correlation coefficient of the two Moho model is 0.53, and methodology and numerical error are mainly responsible for any mismatch between the two models. In order to integrate the two independentely-estimated models, we applied least-squares adjustment using the differenced depth. The resultant model has mean and standard deviation Moho depths of 32.0 km and 2.5 km with (min, max) depths of (20.3, 36.6) kms. Although this result does not include any topographic gravity effect, however, the validity of isostasy and the role of local stress field in the study area should be further studied.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.4D
• /
• pp.407-419
• /
• 2012

It is difficult to obtain the accurate and homogeneous height information over the whole Korea due to the effect of different vertical datums have been divided into land and sea part. In this study, we tried to unify the different vertical datums using the precise spirit leveling between TBM (tidal bench mark) and BM (bench mark) in order to solve the problems caused by different vertical datums. For this, the vertical datum offsets at observed points which were calculate from leveling results and then transformation model of vertical datum will be modelled using calculated offsets along the coastal line. For suggesting the precise modelling method to vertical datum transformation, we analyzed results from various interpolation methods such as Spline and LSC method. As the results from analysis, the LSC method combined with 4-parameters trend model is more suitable for modelling the offsets between vertical datums. The final transformation model of vertical datum using the combination of LSC and 4-parameter model which provides the transformation accuracies of ${\pm}10.4cm{\sim}14.8cm$ level. And, the software for vertical datum transformation that was also developed using the final model in order to convert the height information included in various spatial data effectively. Therefore, the transformation model between vertical datums of land and sea part, which is developed in this study, is expected to minimize the confusion caused by mismatch of height information in the use of spatial data, and it also can be minimize economic and time losses in various application fields such as coastal development project, coastal disaster prevention, etc.

• Journal of the Korean association of regional geographers
• /
• v.21 no.3
• /
• pp.474-488
• /
• 2015

Conflicts in the construction of large public facilities carried out as national projects are crucial issues we have to deal with. There are growing concerns for and oppositions to large construction projects in terms of environmental deterioration and the dissolution of local communities. In the case of projects that promise the creation of jobs and investment, the competition and disputes are increasing and being intensified. Therefore, there is a considerable amount of study on the competitions and conflicts between regions. Previous studies have focused on the procedures of public policy, governance structure, the role of local media. Contrary to the previous studies, this study investigates the spatial ways of constructing conflicts. Based on the analysis of the project of "Southeastern New International Airport", there is a mismatch between the spatial boundary of cost/benefit and agents (regions) of disputes. The agents of conflicts also show the politics of multiple scales by constructing alliances and breaking the network in the process of the airport project. The findings suggest that the conflicts on regional development should be understood as the construction of dynamic regional politics on regional development rather than as the by-product in the practice of policies.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.24 no.4
• /
• pp.536-546
• /
• 2014

Objectives: The major objective of this paper is compare the exposure work hours and experieence of ill health symptoms among under and over employment and matched group. Workers with over employment have more exposed to hazards than that with under employment because that workers with over employment work more than those with ender employment. Methods: This study as heuristics one used the third Korean Working Conditions Survey done by Occupational Safety and Health Research Institute in 2011. The sample size is 50,023 economic active persons. Over and under employment were measured by matching method of preferred and actual work hours. The exposed work hours to hazards were measured according to 13 hazardous factors and the experience of ill health symptoms were scaled by the number of experienced 14 ill health symptoms. To compare the exposure and the symptoms experience were compared by mean difference test with F test. Results: The proportion of over employment in male employees is 32.1% and that in female employees is 29.3% and under employment rate is 11.2% in mae and 13.9% in female employees. There is significant difference of the rate of over and under emplyment among age groups, industrial sectors, occupational groups and the state of employment. The difference of the exposed work hours to hazards among under, over and matched group were statistically significant in all hazards by gender. The exposed work hours to hazards in over employment were more than those in under employment. The number of experienced symptoms in over employment is statistically significantly more than that in under employment. Conclusions: Workers with over employment may be vulnerable group in the criteria of hazard exposure and health status. The results have some implications and limitations because that this study is heuristic one. The mismatch of preferred and actual working hours may be unfavorable work condition that has impact on safety and health of workers. The impact mechanism may be investigated as future study, Because that this study used cross sectional survey data, some causal relationships cannot be evaluated.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.2
• /
• pp.619-624
• /
• 2013

Background: Colorectal cancer (CRC) exists in a more common sporadic form and less common hereditary forms, associated with the Lynch syndrome, familial adenomatous polyposis (FAP) and other rare syndromes. Sporadic CRC is believed to arise as a result of close interaction between environmental factors, including dietary and lifestyle habits, and genetic predisposition factors. In contrast, hereditary forms such as those related to the Lynch syndrome result from inheritance of germline mutations of mismatch repair (MMR) genes. However, in certain cases, the influence of low penetrance alleles in familial colorectal cancer susceptibility is also undeniable. Aim: To investigate the genotype frequencies of MLH1 promoter polymorphism -93G>A and to determine whether it could play any role in modulating familial and sporadic CRC susceptibility risk. Methods: A case-control study comprising of 104 histopathologically confirmed CRC patients as cases (52 sporadic CRC and 52 Lynch syndrome patients) and 104 normal healthy individuals as controls was undertaken. DNA was extracted from peripheral blood and the polymorphism was genotyped employing PCR-RFLP methods. The genotypes were categorized into homozygous wild type, heterozygous and homozygous variants. The risk association between these polymorphisms and CRC susceptibility risk was calculated using binary logistic regression analysis and deriving odds ratios (ORs). Results: When risk association was investigated for all CRC patients as a single group, the heterozygous (G/A) genotype showed a significantly higher risk for CRC susceptibility with an OR of 2.273, (95%CI: 1.133-4.558 and p-value=0.021). When analyzed specifically for the 2 types of CRC, the heterozygous (G/A) genotype showed significantly higher risk for sporadic CRC susceptibility with and OR of 3.714, (95%CI: 1.416-9.740 and p-value=0.008). Despite high OR value was observed for Lynch syndrome (OR: 1.600, 95%CI: 0.715-3.581), the risk was not statistically significant (P=0.253). Conclusion: Our results suggest an influence of MLH1 promoter polymorphism -93G>A in modulating susceptibility risk in Malaysian CRC patients, especially those with sporadic disease.

• Journal of the Korean association of regional geographers
• /
• v.13 no.2
• /
• pp.119-128
• /
• 2007

Grain-size trend analysis is the methodology to obtain the net sediment transport pattern from the spatial trends of grain size parameters. It has the potentials to be an effective tool to address the morphological changes of the deltaic barrier islands in the Nakdoog River once we make sure net transport patterns inferred from grain size trend analysis represent the morphological evolution patterns. This research aims to investigate the applicability of the net transport patterns obtained by 'transport vector', proposed by Gao and Collins(1992), to understanding the morphological changes of the Nakdong River deltaic barrier islands. The results indicate that the net transport directions are overall in concordance with the morphological evolution patterns; however, the level of concordance is low in the island with fast growing rate. The reasons may be match or mismatch of temporal scales involved between processes represented by net transport patterns and morphological change analyzed or the rate of morphological change. Consequently, the application of grain size trend analysis in analyzing the morphological changes of deltaic barrier islands requires the careful consideration of temporal scales involved.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.10
• /
• pp.1561-1569
• /
• 2006

Denaturing gradient gel electrophoresis (DGGE) is one of the most frequently used methods for analysis of soil microbial community structure. Unbiased PCR amplification of target DNA templates is crucial for efficient detection of multiple microbial populations mixed in soil. In this study, DGGE profiles were compared using different pairs of primers targeting different hypervariable regions of thirteen representative soil bacteria and clones. The primer set (1070f-1392r) for the E. coli numbering 1,071-1,391 region could not resolve all the 16S rDNA fragments of the representative bacteria and clones, and moreover, yielded spurious bands in DGGE profiles. For the E. coli numbering 353-514 region, various forward primers were designed to investigate the efficiency of PCR amplification. A degenerate forward primer (F357IW) often yielded multiple bands for a certain single 16S rDNA fragment in DGGE analysis, whereas nondegenerate primers (338f, F338T2, F338I2) differentially amplified each of the fragments in the mixture according to the position and the number of primer-template mismatches. A forward primer (F352T) designed to have one internal mismatch commonly with all the thirteen 16S rDNA fragments efficiently produced and separated all the target DNA bands with similar intensities in the DGGE profiles. This primer set F352T-519r consistently yielded the best DGGE banding profiles when tested with various soil samples. Touchdown PCR intensified the uneven amplification, and lowering the annealing temperature had no significant effect on the DGGE profiles. These results showed that PCR amplification bias could be much improved by properly designing primers for use in fingerprinting soil bacterial communities with the DGGE technique.