• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1D
• /
• pp.185-193
• /
• 2006

The on-going pre-environmental investigation at present is performed by separate numerical analysis of each provision which makes integrated pre-environmental investigation is difficult. The application of numerical data is insufficient, which results to the deterioration of environmental investigation result's objectivity. A lot of time and money is required for the investigation. In this study, the spacial analysis function of GIS was applied on the 8 pre-environmental investigation factors. Pre-environmental investigation GIS DMS(Decision Making System) was constructed to make integrated investigation possible through the use of investigation results for each factor. Through the use of the developed pre-environmental investigation GIS DMS and the pre-constructed GIS data, the objectivity of environmental investigation is sufficient and time and cost are reduced. Therefore, this system can be used for pre-environmental investigation during route selection in the initial stages of road construction. Through the numerical and visual data obtained from the system developed in this paper, it is easier to gain the approval of the public. Furthermore, environmental problems due to road construction can be investigated with less time and money during the initial stages of road construction.

• Hwankyungkyoyuk
• /
• v.22 no.2
• /
• pp.79-91
• /
• 2009

The purpose of this study is to find out the influence of the urban stream investigation on elementary school students' environmental conservation awareness. The urban stream investigation was applied to the experimental group and the control group has been taught by the traditional teaching method focused on the teacher's lecture. To analyze the effect of urban stream investigation, the pre- and post-tests on environmental conservation awareness composed of interest in living things, perception about water pollution and environmental conservation were applied to the both groups. The results were analyzed by One-way ANOVA and ANCOVA. As a result, there were not significant difference between the experimental and the control group in the pretest(p>.05). In the post-tests on the student's interest in living things, perception about water pollution and environmental conservation the scores of the experimental group were higher than those of the control group(p<0.05). Therefore, the urban stream investigation made a positive effect on improving of elementary school students' environmental conservation awareness.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.2
• /
• pp.152-163
• /
• 2007

The on-going pre-environmental investigation at present is performed by separate numerical analysis of each provision which makes integrated pre-environmental investigation is difficult. The application of numerical data is insufficient, which results to the deterioration of environmental investigation result's objectivity. A lot of time and money is required for the investigation. In this study, the spacial analysis function of GIS was applied on the 8 pre-environmental investigation factors. Pre-environmental investigation GIS DMS(Decision Making System) using AHP was constructed to make integrated investigation possible through the use of investigation results for each factor. Through the use of the developed pre-environmental investigation GIS DMS and the pre-constructed GIS data, the objectivity of environmental investigation is sufficient and time and cost are reduced. Therefore, this system can be used for pre-environmental investigation during route selection in the initial stages of road construction. Through the numerical and visual data obtained from the system developed in this paper, it is easier to gain the approval of the public. Furthermore, environmental problems due to road construction can be investigated with less time and money during the initial stages of road construction.

• Journal of Soil and Groundwater Environment
• /
• v.25 no.2_spc
• /
• pp.70-85
• /
• 2020

This paper introduces the 'Smart Scoping for Environmental Investigations Technical Guide' issued by the US Environmental Protection Agency in 2018, which describes the use of smart scoping during lifecycle of remedial investigation projects. This paper also briefly summarizes the guidelines of soil and groundwater contamination investigation of South Korea. The smart scoping practices can support the development of a robust and realistic conceptual site model that is very useful for investigations and evaluations of the contaminated site. The application of evaluation tools relevant for the site-specific characteristics is important for the development of a conceptual site model. The smart scoping recommends the use of previous investigation data and implementation of best proven strategies for successful remedial investigation project. The use of smart scoping in contaminated site investigation will provide better management of contaminated sites.

• Journal of Environmental Health Sciences
• /
• v.31 no.2 s.83
• /
• pp.134-146
• /
• 2005

Environmental monitoring system has been adopted and supplemented as inspection measures for the quantitative and qualitative changes of environmental impact assessment (EIA). This study compares the results of environmental impact assessment with the results of post-environmental investigation using a correction and principal component analysis (PCA) in the housing development project. Correlation analysis showed that most of air quality variables including TSP, $PM_{10},\;NO_2$, CO were linearly correlated with each other in the environmental impact assessment and the post-environmental investigation. In the water quality, pH and BOD were well correlated with the DO and SS, respectively. As a result of correlation analysis in the noise and vibration, noise in day and night and vibration in day and night were related to each other between EIA and the post-environmental investigation. From the results of analysis of soil, Cu with Cd, Cu with Pb, and Cd with Pb were related to each other in EIA. Principal component analysis (PCA) showed a powerful pattern recognition that had attempted to explain the variance of a large dataset of inter-correlated variable with a smaller set of independent variables (principal components). Principal component (PC1) and principal component (PC2) were obtained with eigenvalues> 1 summing almost $90\%$ of the total variance in the all of the items(air, water, noise, vibration and soil) in EIA and post-environmental investigation.

• Economic and Environmental Geology
• /
• v.37 no.1
• /
• pp.49-59
• /
• 2004

The concectration and distribution of contaminants obtained from a contaminated land investigation or an environmental geochemistry survey constitutes the basis of a decision-making process on environmental policies or of scientific researches. As the quality of data determines the reliability of the result, the investigation plan should be adjusted according to the purpose of the investigation. In general, the effort to improve the data quality had been focused mainly on the QA/QC procedures in laboratories. The rapid progress of analytical instrument has also contributed toward improving the analytical precision to a sacrificable degree. Nevertheless, in many cases, it is not the analytical precision that needs improvement for the better precision of overall measurement process: it is rather during the sampling process in the field that is responsible for the poor precision. To assess the data quality on a measured value, ISO recommends to provide information on "measurement uncertainty" along with the measured value. The measurement uncertainty in an environmental measurement context can be explained as the statistical number that expresses the degree of the uncertainty stemming from the sampling and analytical procedures. There is a cost involved in order to improve the precision of sampling and analytical methods so as to decrease the degree of measurement uncertainty. The economical point of compromise in an investigation planning can be achieved when the allowable degree of uncertainty has been set before-hand. The investigation can then be planned accordingly not to exceed the uncertainty limit. Furthermore, if the measurement uncertainty estimated from the preliminary investigation can be separated into sampling and analytical uncertainties, it can be used as a criterion where the resources for the investigation should be allotted cost-effectively to reinforce the weakest link of the whole investigation process. This paper aims to present a method of estimating the level of measurement uncertainty of a measured contamination concentration at a site used as an example and to show how the estimated uncertainty can be applied to serve the particular purpose of an investigation.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.23 no.2
• /
• pp.69-89
• /
• 2020

Scientific trust and quantification of traditional species investigation and results that have been used in ecology for decades has always been a problem and concern for ecologists. Global ecologists have proposed DNA-based species investigation studies to find answers to problems. In this study, we reviewed the global trend of research on environmental DNA(eDNA), which is a method for monitoring species by detecting DNA of organisms naturally mixed in environmental samples such as water, soil, and feces. The first eDNA research confirmed the possibility of species investigation at the molecular level, and commercialization of NGS(Next Generation Sequencing) and DNA metabarcoding elicits efficient and quantitative species investigation results, and eDNA research is increasing in the filed of ecology. In this study, mammals and birds were detected using MiMammal universal primers from 23 samples(3 natural reserves; 20 water bowls) out of 4 patches to verify eDNA for urban ecosystems in Suwon, and eDNA was verified by performing camera trapping and field survey. Most terrestrial species were detected through eDNA, and particularly, mice(Mus musculus), and Vinous-throated Parrotbill (Sinosuthora webbiana) were identified only with eDNA, It has been confirmed to be highly effective by investigating techniques for small and internal species. However, due to the lack of resolution of the primer, weasels(Mustela sibirica) and squirrels(Melanochromis auratus) were not detected, and it was confirmed that the traditional investigation method was effective only for a few species, such as Mogera robusta(Mogera robusta). Therefore, it is judged that the effects of species investigation can be maximized only when eDNA is combined with traditional field survey and Camera trapping to complement each other.

• Journal of Environmental Health Sciences
• /
• v.37 no.5
• /
• pp.335-341
• /
• 2011

The Goseong abandoned mine accident was a typical case of long-term sequela resulting from environmental disruption during the rapid economic development of Korea. While the final conclusion of epidemiologic investigation was that residents surrounding the abandoned mine were simply exposed to cadmium from the abandoned mine without any patient contracting 'itai-itai' disease, not only did residents around the abandoned mine suffer enormous psychological and economic damage, but people in neighbouring communities did as well when the entire area was stigmatized as an contaminated area. Environmental civic groups and the government worked together to solve the problem by forming a joint committee which held the right of decision in any matter to be determined. By inviting all the stakeholders to participate in the joint committee, a transparent investigation was guaranteed and the results of investigation and recommendations to solve the problem were accepted by all involved. Even though the environmental health division in Ministry of Environment has developed considerably and built up a capacity to deal with environmental accidents, the process which was adopted to solving the Goseong abandoned mine accident can be useful to settle environmental health issues with severe conflicts among stakeholders.

• Journal of Environmental Impact Assessment
• /
• v.6 no.1
• /
• pp.5-31
• /
• 1997

Strategic Environmental Assessment (SEA) is an assessment process integrated with policy and planning processes considering environmental impacts, not at the level of individual project, but at higher level of policy and plan. Presently, two systems for the SEA are being implemented in Korea. One is "the consultation of environmental investigation into a change in national land utilization", which is to be pre-discussed with the head of the related central administrative organizations, based on the respective individual code. The other is "the consultation of environmental investigation into an administrative plan and project", which is to be pre-discussed with the minister of the environments for the administrative plan. However, these two systems are not integrated procedures with the planning process. In other words, there is a separate post-environmental assessment after planning. Also concrete proposal is not yet prepared for the method and procedure of environmental investigation about details of the planning. Therefore, they do not playa role in taking precautions for environmentally sustainable development. In this study, for the effective environmental investigation at the level of planning, environmental assessment model to be integrated with urban comprehensive plans was developed. The results of this study can be summarized as follows: First, based on the analysis of systematic problems in environmental investigation of this country, the study compared and analysed the SEA method of foreign countries. derived the potential limitations in its applications to this country. Also, the new method in this study, is integrated into planning process by improving the limitations. Thus, we developed the SEA model for this country, which consists of seven steps ; Phase 1; establishing a work program, Phase 2; defining the scop. of the SEA, Phase 3; analyzing an existing environmental situation, Phase 4; examining the consistency with environmental policy, Phase 5; appraising and synthesizing the plan content, Phase 6; proposing recommendations, Phase 7; monitoring and feedback. Second, the two types of application program of the developed assessment model were proposed. One is to integrate this model into planning process, and the other is for the institute and ministry of environments to implement SEA after planning. An aim of this study was developing an environmental assessment model at the planning level which was not yet established in this country and was to apply the model to urban comprehensive plan for inspection. This research will make the effective operation of environmental investigation system possible at the planning level in this country and contribute to the environmental protection at the global level.

• Journal of Environmental Impact Assessment
• /
• v.9 no.1
• /
• pp.61-74
• /
• 2000

This study compares the results of environmental impact assessment with the results of post-environmental investigation, using the case of Taean thermal power plant construction. The atmospheric and water qualities were not greatly changed before and after the construction of the power plant. However, the site of the highest concentration predicted by the atmospheric quality modeling in environmental impact assessment was different from that after operation of 4 power plants. There was also a difference in the diffusion range of thermal discharge water between the measured result(1km) and the predicted value(1.5km) with the model. Thus, environmental impact evaluation should be based on long-term (more than a year) environmental monitoring data. For the modeling of atmospheric quality and numerical thermal discharge water diffusion, appropriate models for each plant should be selected and the numerical modeling should be accompanied by computer simulation, wind tunnel test, etc. Moreover, environmental evaluation should focus more on the degree of impact on surroundings than the prediction of changes in surroundings caused by operation of plants.