• Journal of Environmental Health Sciences
• /
• v.44 no.3
• /
• pp.283-292
• /
• 2018

Objectives: This study was conducted to identify hazardous factors that reflect the characteristics of the academy and to provide basic data of environmental safety standard. Methods: Heavy metals, volatile organic compounds, formaldehyde, pesticides and phthalates were measured in 20 academies, which were supplementary, music, art and physical education institutes. Results: In case of heavy metals, the 12 locations were detected for lead (Pb) over the standard value, and 15 locations were exceeded for the total heavy metal. In six locations, the concentrations of volatile organic compounds were exceeded the standard value of $400{\mu}g/m^3$, and two locations for formaldehyde were exceeded the standard value of $100{\mu}g/m^3$. The most commonly detected agents in the air dust were chlorpyrifos and diazinon. The concentrations of DEHP, DINP, and DBP were detected and exceeded in several academies, The risk assessment results showed that HCHO as carcinogen had a safety level of 10-7 to 10-6, and DEHP and DINP as non-carcinogens had a safety level as assessed to be under than 0.1. Conclusions: Through the investigation of long-term environmental and health effects related laws on academies, indoor air quality management might be needed because there were cases of exceeding standard.

• Korean Journal of Environmental Agriculture
• /
• v.12 no.2
• /
• pp.184-192
• /
• 1993

In order to provide food factors necessary for safety assessment and standard setting of hazardous substances in foods, per capita consumption of food items by Korean population was optimized for the periods of 1970's and 1980's from nutritional survey and food supply data. Average daily intake of total foods per person was 1,104 g in 1970's and 1,240 g in 1980's. Much variation was observed between the two decades by food commodities.

• Environmental Analysis Health and Toxicology
• /
• v.11 no.3_4
• /
• pp.45-51
• /
• 1996

Histopathological changes of gills and caudal fins isolated from fishes, Cyprinus carpio, Carassius auratus, and Hernibarbus labeo, which were killed by oxygen deficiency or toxic chemicals, were studied. The toxic chemicals were HCl, NaOH, chloroform, benzene, heavy metals(Cu, Cr, Zn, Pb, Hg), and o-dichlorobenzene. The exposure level was enough to kill the fishes within 30 minutes. Oxygen deficient water was prepared by aeration of nitrogen gas and the oxygen concentration was less than l ppm. Cryocutting was used for the rapid preparation of tissue slides and the tissues were stained by hematoxylin/eosin. In the fishes killed by hazardous chemicals, congestion and/or hyperplasia of secondary lamella and erosion of fin were found as the major histopathological changes. Whereas, these characteristics were not observed in gills or caudal fins of fishes killed by oxygen deficiency. These different bioindications appeared in the fishes killed by toxic substances or natural causes, can be used for the rapid identification of the causes of fish kills.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.2
• /
• pp.213-217
• /
• 2008

The objective of this research is to investigate the leaching characteristics of unregulated heavy metals such as Ni, Zn, Ba, Be, Sb, Se, V in specified waste. 108 waste samples which were taken from the representative facilities emitting hazardous substances, were analyzed. The rate of leaching of heavy metal was measured using an official test method. From the results, wastewater treatment sludge and dust contained much Ni, and Zn was detected in all samples. Dust and waste catalyst producted from petroleum-refining process tended to reveal V in high concentration. Ba, Be, Sb, Se showed low concentration, but require additional analyses of waste generated at different industries.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.31 no.1
• /
• pp.1-12
• /
• 2021

Objective: The purpose of this study was to contribute to the prevention of occupational diseases through the development of an automatic analysis program for evaluating workers' exposure to hazardous chemical substances. Methods: The authors selected chemical substances that caused occupational disease in Korea and chemical substances that are frequently used in industrial sites as target substances for a GC-MS automatic analysis program. The target substances are organic compounds which can be measured by a passive sampler. The automatic analysis program was studied using various raw data obtained from GC-MS analysis for the target substances. Results: A total of 48 organic compounds that can be measured with a passive sampler were selected as target substances for the GC-MS automatic analysis program. The selected compounds included substances that caused occupational disease, substances related to C1 and D1 in special health examinations, and substances for which work environment measurements have been frequently conducted. The GC-MS automatic analysis program was developed by combining information mainly on retention time and mass spectrum. The GC-MS automatic analysis program is designed to analyze unknown samples by comparing the mass spectrum and retention time of the samples to those of reference materials. To evaluate the stability of the program, samples at about the 30-50% level of OELs were prepared and analyzed with the GC-MS automatic analysis program, resulting in stable results for all 48 organic compounds. Conclusion: An automatic analysis program for a total of 48 organic compounds was developed using a GC-MS system that can analyze organic compounds. Unknown samples that contain the 48 organic compounds can be automatically analyzed by the developed program. It is anticipated that it can contribute to the prevention of occupational diseases through an GC-MS automatic analysis program that can quickly provide workers with information on exposure to chemical substances.

• Safety and Health at Work
• /
• v.10 no.1
• /
• pp.114-121
• /
• 2019

Background: The photolithography process in the semiconductor industry uses various chemicals with little information on their constitution. This study aimed to identify the chemical constituents of photoresist (PR) products and their by-products and to compare these constituents with material safety data sheets (MSDSs) and analytical results. Methods: A total of 51 PRs with 48 MSDSs were collected. Analysis consisted of two parts: First, the constituents of the chemical products were identified and analyzed using MSDS data; second, for verification of the by-products of PR, volatile organic compounds were analyzed. The chemical constituents were categorized according to hazards. Results: Forty-five of 48 products contained trade secrets in amounts ranging from 1 to 65%. A total of 238 ingredients with multiple counting (35 ingredients without multiple counting) were identified in the MSDS data, and 48.7% of ingredients were labeled as trade secrets under the Korea Occupational Safety and Health Act. The concordance rate between the MSDS data and the analytical result was 41.7%. The by-product analysis identified 129 chemicals classified according to Chemical Abstracts Service No., with 17 chemicals that are carcinogenic, mutagenic, and reprotoxic substances. Formaldehyde was found to be released from 12 of 21 products that use novolak resin. Conclusion: We confirmed that several PRs contain carcinogens, and some were not specified in the toxicological information in the MSDS. Hazardous chemicals, including benzene and formaldehyde, are released from PRs products as by-products. Therefore, it is necessary to establish a systematic management system for chemical compounds and the working environment.

• Journal of Research and Publication Ethics
• /
• v.4 no.1
• /
• pp.9-14
• /
• 2023

Purpose: Adequate public input and participation in environmental health research must be provided to ensure accurate results from studies involving human exposure to potentially hazardous substances. By addressing these ethical issues associated with environmental health research, this study can help reduce risks for individuals participating in studies and whole communities affected by their impactful findings. Research design, data and methodology: The current research should have followed the rule of qualitative textual research, searching and exploring the adequate prior resources such as books and peer-reviewed journal articles so that the current author could screen proper previous works which are acceptable for the content analysis. Results: The current research has figured out four ethical issues to improve environmental health study as follows: (1) Lack of Guidance for Collecting and Utilizing Data Ethically, (2) Insufficient Consideration Is Given to Vulnerable Populations When Conducting Studies, (3) Unclear Standards Exist for Protecting the Privacy Of Participant's Personal Information, and (4) Conducting Socially and Religiously Acceptable Research in Various Communities. Conclusions: This research concludes that future researchers should consider implementing anonymization techniques where possible so that findings are still accessible, but the risk posed by disclosing identifying information remains minimized during the analysis/publication stages.

• Journal of Dairy Science and Biotechnology
• /
• v.29 no.2
• /
• pp.43-49
• /
• 2011

The increasing number of analytes in concern and the alarming health and environmental consequences have required effective means of monitoring for safety control. Biosensors offer advantages as alternatives to conventional analytical methods because of their inherent specificity, simplicity, and quick response. Colorimetric biosensor, one of biosensor group, is one of the easiest and the most convenient methods because detection can be done using naked eye. Recently, a novel method for rapid detection and read-out of specific immunoassays with naked eye using polydiacetylene (PDA) was developed. Polydiacetylene has recently been in the limelight as a transducing materials because of its special features that allow optical transduction of sensory signals and inherent simplicity and ease of use in supramolecular chemistry. Various forms of PDA are used as a sensor platform for detection of various biological analytes such as viruses, DNA, proteins, bacteria and hazardous molecules.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.5
• /
• pp.609-615
• /
• 2021

Chemical accidents can happen anywhere in the world. To prevent chemical accidents, Korea introduced the Chemicals Control Act. However, Small and medium-sized businesses do not meet these regulations. Accordingly, the Ministry of Environment is providing a chemical safety management support project for Small and medium-sized businesses. However, there are many small and medium-sized businesses, and businesses that need support need priority. In this study, the risk of the plants was classified into hig h, medium, and low risk based on four methods. As a result, out of 90 plants subject to the study, high risk was 30% and medium risk was 70%. The industries with the high risk were chemical products manufacturing and paint manufacturing. The plating and printing industries showed relatively medium risk. This risk classification has the advantage that it can obtain intuitive and quick results. These studies can be used as basic data for chemical safety management of local governments and Ministry of Environment.

• Journal of Environmental Health Sciences
• /
• v.46 no.2
• /
• pp.232-244
• /
• 2020

Objectives: The purpose of this study is to develop a management system for the safe handling of chemicals and related health management based on reporting under the Chemical Control Act (CCA). It is used to search handling information by constructing data linked to the name of companies, chemicals, products, etc. Methods: Due to the differences in submission periods for each reporting regulation of the Chemical Control Act, the data used is as follows: A statistical survey collected 26,222 companies in 2014 and 2016, Pollutant Release Transfer Registers (PRTR) collected 4,234 companies in 2015-2017, performance reports by handlers of hazardous chemical substances collected 14,658 companies in 2016-2018, and declarations for import of toxic chemicals collected 892 companies in 2016-2017. The total information on 36,080 companies is standardized based on company ID, name, business registration number, address, and more. The data were classified into information such as company, chemical, and product name and amounts handled and released, and then extracted according to criteria to establish relationships among classified information. Results: A search service was developed for handling information on chemical substances for reporting data by linking four reporting data: statistical survey, PRTR, performance report by handler of hazardous chemical substances, and declaration for import of toxic chemicals under the CCA. It was composed of five menus to search by regulation type, reporting regulation, companies and chemicals, and system management. Conclusion: It is necessary to use data linked by company, region, and chemical to respond and to prevent chemical accidents. In addition, these items can be utilized to perform handling and safety management of chemicals according to whether regulations under the CCA may be implemented.