• Nuclear Engineering and Technology
• /
• 제49권1호
• /
• pp.245-253
• /
• 2017

The relative displacement of a piping system installed between isolated and nonisolated structures in a severe earthquake might be larger when without a seismic isolation system. As a result of the relative displacement, the seismic risks of some components in the building could increase. The possibility of an increase in seismic risks is especially high in the crossover piping system in the buildings. Previous studies found that an elbow which could be ruptured by low-cycle ratcheting fatigue is one of the weakest elements. Fatigue curves for elbows were suggested based on component tests. However, it is hard to find a quantitative evaluation of the ultimate state of piping elbows. Generally, the energy dissipation of a solid structure can be calculated from the relation between displacement and force. Therefore, in this study, the ultimate state of the pipe elbow, normally considered as failure of the pipe elbow, is defined as leakage under in-plane cyclic loading tests, and a failure estimation method is proposed using a damage index based on energy dissipation.

• 한국결정성장학회지
• /
• 제25권6호
• /
• pp.294-298
• /
• 2015

일본 국토교토성이 책정한 <도로교 장수명화 수선계획사업>에 의하면, 주요 지역에 건설된 RC 상판의 심각한 손상 원인은 대형차량의 주행하중에 의한 피로열화와 재료의 경년열화 등으로 보고되어지고 있다. 따라서 이에 대한 대책으로 탄소섬유 시트를 이용한 하부 접착 보강공법이 많이 소개되어지고 있으나, 최근에는 CFS와 동등한 재료특성치를 보유하며, 시공성이 뛰어난 탄소섬유 스트랜드 시트가 새로운 보강재료로써 관심이 증폭되어지고 있다. 그러나 이러한 CFSS의 윤하중 피로실험을 통한 내피로성 평가는 현재 일부 연구기관에서만 그 성과가 보고되어지고 있는 실정이며, 국내에서는 아직까지 연구성과에 관한 보고 등이 거의 없는 실정이다. 따라서 본 연구에서는 RC 상판의 하부에 CFS를 전면접착 보강한 실험체와 CFSS를 격자형으로 보강한 실험체를 제작하여, 윤하중 피로실험을 실시하고 내피로성을 평가하였다.

• 한국환경보건학회지
• /
• 제40권5호
• /
• pp.376-384
• /
• 2014

Objective: The purpose of this study is to compare the health status of residents who were exposed to sources of extremely low frequency electromagnetic fields (ELF-EMFs) in the living environment and those who were not exposed to such a source of ELF-EMFs through a survey designed to appraise the residents' health levels. Method: Aimed at 251 residents exposed to a source of ELF-EMFs and 278 residents not exposed to a source, the survey was conducted to investigate the health status of the residents on the basis of questionnaire SF-36. Result: The health status scores of residents exposed to ELF-EMFs turned out to be lower than those of their counterparts. In terms of self-reported symptoms related to health and sleep quality, residents exposed to ELF-EMFs were found to have a higher complaint rate of self-reported symptoms such as dizziness, depression, and fatigue. Regarding sleep disorders, residents exposed to ELF-EMFs appeared to have a slightly higher complaint rate of sleep disorders compared to non-exposed residents. Conclusion: If a region is to be exposed to a source of ELF-EMFs, a more proactive policy for reducing such exposure is advised. In addition, it is necessary to better understand problems of residents by emplacing an ELF-EMFs risk information delivery system and building an efficient communication system for voluntary participation during the construction phase.

• 한국자동차공학회논문집
• /
• 제21권6호
• /
• pp.16-23
• /
• 2013

It is important that proving ground damage is correlated with target customer usage. This paper describes the test mode for durability test of active suspension control system for proving ground correlation and optimization. Acceleration, strain, wheel force and other types of data are collected on a vehicle as it traverses different proving ground surfaces. The primary objective of the analysis is to determine which mixture of proving ground surfaces offers the best representation of customer usage while minimizing the total test time. And durability testing offers the best way to assess the capability of a product to reach its reliability target. The test should be representative of the real environmental load and replicate the same customer usage.

• 한국안전학회지
• /
• 제18권4호
• /
• pp.35-38
• /
• 2003

The wire rope, one of the component of the elevator, is extremely important for the sage operation of the elevator. That is why the wire rope is replaced at a specific interval regradless of the operating conditions or the degree of damage to prevent the breakage of the wire rope. This is the waste of resources, causing economic and environmental loss. This paper has surveyed and analyzed and analyzed the status of replacing wire-rope by buildings that use elevators, in order to compare the replacement cycles of the wire rope under each operating conditions.

• Steel and Composite Structures
• /
• 제49권5호
• /
• pp.473-486
• /
• 2023

A through-railway bridge with an inclined girder has recently been applied to optimize the cross-section of a slender bridge structure in railway bridges. To achieve the additional cross-section optimization effect by the bolted end-plate connection, it is necessary to investigate the application of the bolted end-plate tension connection between the inclined girder and the crossbeam. This basic study was conducted on the application of the bolted end-plate moment connection of crossbeams to half-through girders with inclined webs. The combined behavior of vertical deflection and rotational behavior was observed due to the effect of the web inclination in the inclined girder where the steel crossbeam was connected to the girder by the bolted end-plate moment connection. Therefore, in the experiment, the deflection of the inclined girder was 1.77-2.93 times greater than that of the vertical girder but the lateral deflection of the inclined girder was 0.4 times less than that of the vertical girder. Moreover, the tensile stress of the upper bolts in the inclined girder with low crossbeams was clearly 0.81 times lower than that of the vertical girder. According to the results, the design formula for vertical girders does not reflect the influence of the web inclination. Therefore, this study proposed the design procedures for the inclined girder to apply the bolted end-plate moment connection of the crossbeam to the inclined girder by reflecting the design change factors according to the effect of the web inclination.

• International Journal of Advanced Culture Technology
• /
• 제9권3호
• /
• pp.131-141
• /
• 2021

The present study is following a series of research investigations on design resources coming from collected data referring to users' awareness and preferences. The aim of this research is to test the Healthcare Environmental Color Index as a basis for practitioners in the field of healthcare design. An array of color samples selected from previous research, have been presented to the respondents via an online survey, in order to identify the preferences of the two groups on the relation between environmental color and health. As a result of the first experiment and through the comparison of processed data, the maximum percentage of respondents from each group is validating the relation between environmental color and health. For the second experiment we intend to highlight the patterns of color preferences for each group, and thus to test the color samples healing function. The compared data also showed a higher awareness of Koreans than Romanians on the potential of color applied to healing environment. Last but not least in the third experiment we show the top five color samples preferred by each group. It is significant that the comparison of the results validated once more some of our previous findings related to the healthcare environment, such as: the general preference for the green hue (associated to fatigue relax according to color psychology) and the blue hue (sedation release effect) but also the yellow hue - associated to bright energy. Three out of the top five preferred color samples have been identical to both groups while the other two samples have shown characteristic variations. These results show that similarities are strong and can be used in a glocal design strategy as an accessible tool for any practitioner. Based on the Healthcare Environmental Color Index and users' preferences analysis, a new design culture for healthcare can be established and developed.

• 한국해양공학회지
• /
• 제29권5호
• /
• pp.366-372
• /
• 2015

Ocean energy is one of the most promising renewable energy resources. In particular, South Korea is one of the countries where it is economically and technically feasible to develop tidal current power plants to use tidal current energy. In this study, based on the design code for HARP_Opt (Horizontal axis rotor performance optimizer) developed by NREL (National Renewable Energy Laboratory) in the United States, and applying the BEMT (Blade element momentum theory) and GA (Genetic algorithm), the optimal shape design and performance evaluation of the horizontal axis rotor for a 200-kW-class tidal current turbine were performed using different numbers of blades (two or three) and a pitch control method (variable pitch or fixed pitch). As a result, the VSFP (Variable Speed Fixed Pitch) turbine with three blades showed the best performance. However, the performances of four different cases did not show significant differences. Hence, it is necessary when selecting the final design to consider the structural integrity related to the fatigue, along with the economic feasibility of manufacturing the blades.

• 한국해양공학회지
• /
• 제33권5호
• /
• pp.435-446
• /
• 2019

Because offshore structures are affected by various environmental loads, the risk of damage is high. As a result of ever-changing ocean environmental loads, damage to offshore structures is expected to differ from year to year. However, in previous studies, it was assumed that a relatively short period of load acts repeatedly during the design life of a structure. In this study, the residual life of an offshore wind turbine support structure was evaluated in consideration of the timing uncertainty of the ocean environmental load. Sampling points for the wind velocity, wave height, and wave period were generated using a central composites design, and a transfer function was constructed from the numerical analysis results. A simulation was performed using the joint probability model of ocean environmental loads. The stress time history was calculated by entering the load samples generated by the simulation into the transfer function. The damage to the structure was calculated using the rain-flow counting method, Goodman equation, Miner's rule, and S-N curve. The results confirmed that the wind speed generated at a specific time could not represent the wind speed that could occur during the design life of the structure.

• 한국도로학회논문집
• /
• 제14권4호
• /
• pp.9-18
• /
• 2012

PURPOSES : This study evaluated the field applicability and laboratory performance of warm-mix asphalt (WMA) as an alternative technology in asphalt pavement. METHODS : The pilot road using two different types of WMA mixture and one HMA mixture was constructed in Waegwan-Seokjeok road construction site and the mixtures were sampled at the asphalt plant for laboratory testings. The field applicability was assessed in environmental aspects, such as $CO_2$ emission, and in aspects of constructibility using the existing equipment and procedure, i.e., thickness and density measurement. The laboratory testings included the moisture susceptibility test by AASHTO T283, dynamic modulus test, triaxial repeated load permanent deformation test, and the fatigue test. RESULTS : The temperatures for production and compaction of WMA were $20{\sim}30^{\circ}C$ lower than those for HMA and therefore, the noxious gas emission were significantly reduced. The field density of WMA pavements was similar or better than that of HMA pavement. From the laboratory testings, it was found that WMA mixtures exhibit comparable performance to HMA mixture in moisture susceptibility, permanent deformation, and fatigue performance. CONCLUSIONS : With these results, it would be concluded that WMA could replace the existing HMA technology without any significant issue. To support this conclusion, it is necessary to track the long-term performance of WMA in pilot road.