• Journal of Bio-Environment Control
• /
• v.15 no.4
• /
• pp.385-389
• /
• 2006

This study was carried out to determine the effect of raising seedling at Hallasan area of sub-alpine (altitude of 600m above sea level) to improve fruiting.ate of Squash (Cucurbita maxima) in retarding culture. 'Ebis' cultivar was seeded in plug tray of 32 cells and the seedlings were grown for 25 days. They were transplanted on August 26, 2004, following L-stem training method under rain-shielding condition. Seedling height, number of nodes and leaf area were higher in lowland than in sub-alpine area. T/R ratio of seedling in sub-alpine was much lower as compared with that in the lowland. The first fruiting was on the 19th node in sub-alpine area, and on the 26th node in the lowland area(control). The succeeding fruiting nodes were lower by 3 to 5 node than those of control. Fruiting rate of second flower was improved by 17.2% compared with the 1.4% in control. The marketable yield was increased by 27% by raising seedling in sub-alpine area (4,460 kg/10a). This also brought out 20% labour saving effect. The environmental condition for raising seedling in the sub-alpine area of Hallasan was effective for the improvement of Squash (Cucurbita maxima) fruiting rate compared with lowland area.

• Journal of Forest and Environmental Science
• /
• v.34 no.4
• /
• pp.321-337
• /
• 2018

The characteristics of 124 Phytolacca americana present areas and 88 surrounding absent areas over the country were investigated and compared from July 2016 to Sept 2017. The Phytolacca americana was confirmed as having been nationally distributed and is usually found in roadsides at an altitude of 380 m (26%), forest edges (24%), forests (19%), sunny spots (60%), dry soils (53%), sandy loams (31%) and sand+gravel soils (22%). 321 taxons consisting of 79 families, 209 genera, 289 species, 2 subspecies, 26 varieties and 4 cultivars and 286 taxons consisting of 76 families, 195 genera, 256 species, 2 subspecies, 24 varieties and 4 cultivars were found in the Phytolacca americana present areas and the absent areas, respectively. The relative net contribution degree was found highest in the Phytolacca americana (100) followed by Robinia pseudoacacia (29.4), Humulus japonicus (8.8) and Artemisia princeps (6.0) in the present areas, while it was found highest in Robinia pseudoacacia (100) followed by Humulus japonicus (44.4), Artemisia princeps (35.9), Pueraria lobata (18.6) and Setaria viridis (12.3) in the absent areas. The Raunkier's life form in the present/absent areas was found highest in the therophytes (34%/34%), followed by hemicryptophytes (17%/18%), megaphanerophytes and mesophanerophytes (18%/17%), nanophanerophytes (11%/11%) and geophytes (9%/11%). There was no significant difference in the species diversity between the present (2.141) and the absent (2.124) areas. However, the allelopathic agent and light blocked-out by the Phytolacca americana could possibly inhibit germination and the development of other species; especially, where a difference in species diversity was found high in forests, compared to other habitats (p=0.0605). Accordingly, it is suggested to review possible disturbances of native species habitats in shady spots including forest gaps, although the effect of Phytolacca americana on the ecological system in the suburban open and disturbed areas is not large.

• 전자공학회논문지 IE
• /
• v.49 no.1
• /
• pp.12-17
• /
• 2012

Fast development of ubiquitous technology prompted the broadening of the related application area. Application of ubiquitous techniques and system into the construction sites may give us many benefits. There are always a lot of hazard situations in construction sites, and the falling is known to have the high accident rate. To prevent the falling, there has been a lot of efforts including safety education and use of safety gears. In this study, we designed, fabricated and tested a system that can monitor the worker's safety and location informations in real time by using the wireless technology of TOA and RSSI. We used ATmegal28 that is popular in the industrial equipments as MCU and NanoPan 5357 module from Nanotron and CC2500 chipset from TI for radio circuits. We also used 3-axis accelerometer and pressure MEMS sensors to obtain the environmental information, and therefore to aquire the informations of the worker's movement and altitude. We used Labview software from National Instrument to monitor and control the system. We developed the system to send the warning alarms to the server operator and the workers when the workers in the danger zone did not wear the safety hook.

• Journal of Korea Water Resources Association
• /
• v.41 no.8
• /
• pp.855-862
• /
• 2008

Surface Image Velocimetry (SIV) is an instrument to measure water surface velocity by using image processing techniques. To improve its measuring accuracy, it is essential to get high quality images with low skewness. A truck-mounted SIV system would be a good way to get images, since its crane gives high altitude to the images. However, the images taken with a truck-mounted SIV would be swayed due to the movement of crane and the camera by winds. In that case, to analyze the images, it is necessary to compensate the side sway in the images. The present study is to develop an algorithm to analyze the swayed images by combining common image processing techniques and coordinate transform techniques. The system follows the traces of some selected fixed points and calculates the displacements of the video camera. By subtracting the average velocity of the fixed points from that of grid points, the velocity fields of the flow can be corrected. To evaluate the system's performance, two image sets were used, one image set without side sway and another set with side sway. The comparison of their results showed very close with the error of around 6 %.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.16 no.3
• /
• pp.54-67
• /
• 2013

This study deals with the characteristics of view landscape in modern Daegu city which were analysed employing geographic information system(GIS). The view landscape analysis was performed by using GIS that enables to overlap land use map with the map of range of visibility, and the 3-D simulation. The results are as follows; First of all, the ratio of forest is enormously high in the range of visibility. The distribution of landscape components allows the dwellers to obtain a clear view towards forests from anywhere. The landscape components include west eroded lowlands, east open rolling lands, east eroded lowlands, and high mountain areas: Apsan(Mt.) in the south; Waryoungsan(Mt.) in the west; and Hamjisan(Mt.) and Hakbong(Mt.) in the north. On the tops of those, people are able to secure a clear vision from the viewpoint towards the surrounding mountains because of the rural areas continuing from the viewpoint to the mountains. A continuous view landscape has been formed by these natural environmental factors. Finally, there are multiple view targets with relatively high altitude that are covered with forests in the space between the urban area and the outer mountains that are higher than the view targets, which provides a scenery of mountains overlapped by higher mountains.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.2
• /
• pp.257-264
• /
• 2020

Vectorization is currently the main method in feature collection (extraction) during digital mapping using UAV-Photogrammetry. However, this method is time consuming and prone to gross elevation errors when extracted from a DSM (Digital Surface Model), because three-dimensional feature coordinates are vectorized separately: plane information from an orthophoto and height from a DSM. Consequently, the demand for stereo plotting method capable of acquiring three- dimensional spatial information simultaneously is increasing. However, this method requires an expensive equipment, a Digital Photogrammetry Workstation (DPW), and the technology itself is still incomplete. In this paper, we evaluated the accuracy of low-cost stereo plotting system, Menci's StereoCAD, by analyzing its three-dimensional spatial information acquisition. Images were taken with a FC 6310 camera mounted on a Phantom4 pro at a 90 m altitude with a Ground Sample Distance (GSD) of 3 cm. The accuracy analysis was performed by comparing differences in coordinates between the results from the ground survey and the stereo plotting at check points, and also at the corner points by layers. The results showed that the Root Mean Square Error (RMSE) at check points was 0.048 m for horizontal and 0.078 m for vertical coordinates, respectively, and for different layers, it ranged from 0.104 m to 0.127 m for horizontal and 0.086 m to 0.092 m for vertical coordinates, respectively. In conclusion, the results showed 1: 1,000 digital topographic map can be generated using a stereo plotting system with UAV images.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.1
• /
• pp.21-35
• /
• 2009

KOMPSAT-2 is the seventh high-resolution image satellite in the world that provides both 1m-grade panchromatic images of the GSD and 4m-grade multispectral images of the GSD. It's anticipated to be used across many different areas including mapping, territory monitoring and environmental watch. However, due to the complexity and security concern involved with the use of the MSC, the use of KOMPSAT-2 images are limited in terms of geometric images, such as satellite orbits and detailed mapping information. Therefore, this study aims to produce DEM and orthoimage by using the stereo images of KOMPSAT-2, and to explore the applicability of geo-spatial information with KOMPSAT -2. Orientation interpretations were essential for the production of DEM and orthoimage using KOMPSAT-2 images. In the study, they are performed by utilizing both RPC and GCP. In this study, the orientation interpretations are followed by the generation of DEM and orthoimage, and the analysis of their accuracy based on a 1:5,000 digital map. The accuracy analysis of DEM is performed and the results indicate that their altitudes are, in general, higher than those obtained from the digital map. The altitude discrepancies on plains, hills and mountains are calculated as 1.8m, 7.2m, and 11.9m, respectively. In this study, the mean differences between horizontal position between the orthoimage data and the digital map data are found to be ${\pm}3.081m$, which is in the range of ${\pm}3.5m$, within the permitted limit of a 1:5,000 digital map. KOMPSAT-2 images are used to produce DEM and orthoimage in this research. The results suggest that DEM can be adequately used to produce digital maps under 1:5,000 scale.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.1 no.2
• /
• pp.90-96
• /
• 1999

Foliar and physiological characteristics of Schisandraceae plants distributed in Korea were investigated to elucidate differences in growth and the variations of inter and intra species of the plants. For this study, three species of Schisandraceae plants were used; i) Schisandra chinensis, decidious broad-leaved tree, ii) S. nigra, decidious broad-leaved tree, including monoecious, male and female types, ii) Kadsura japonica, evergreen broad-leaved tree. There were no significant differences in leaf length and width among three species, but leaves of Schisandra sp. plants were shorter and wider relative to those of K. japonica. The length of petiole of Schisandra sp. plants was greater than that of K. japonica and the difference was evident between female type of S. chinensis and K. japonica as longer as two times. Schisandra sp. trees showed larger size of stomata, but fewer numbers of stomata, compared with K. japonica. Although substantial changes in leaf morphology were not found in the Schisandraceae plants grown in different environmental conditions, the foliar length of K. japonica was seemed to be increased with increasing an altitude. Chlorophyll contents were also variable in inter and intra species and in, general K. japonica showed higher levels of chlorophyll contents relative to Schisandra sp. plants. K. japonica also showed higher light compensation point(LCP), light saturation point(LSP) and $CO_2$ assimilation rates at LSP, compared with Schisandra sp. trees. However, Schisandra sp. trees showed lower respiration per photosynthesis rates at LSP. The finding suggested that Schisandra sp. trees were acclimated to the growth conditions of lower light intensity with more effective photosynthetic activity. This was also confirmed by the fact that Schisandra sp. plants grown in shading places of a forest demonstrated the elevated rates of net $CO_2$ assimilation under the conditions of low light intensity.

• Korean Journal of Environment and Ecology
• /
• v.23 no.1
• /
• pp.66-77
• /
• 2009

This study aims at classifying and interpreting on the forest vegetation located in the whole area of Mt. Boryeonsan in Noeunmyeon, Chungju city, Chungcheongbuk Province, Korea using the methodology of the ZM school of phytosociology. The forest vegetation was classified into one Larix leptolepis afforestation, five secondary communities including Qurecus acutissima community, Pinus densiflora community, Quercus aliena community, Quercus serrata community, Quercus variabilis community and one association, Ainsliaeo-Quercetum mongolicae Song et al. 1999(Rhododendro schlippenbachii-Quercion mongolicae, Aceri pseudosieboldiani-Quercetalia mongolicae, Quercetea mongolicae). The research expatiated on the relationship between species composition of the forest communities and the environmental conditions, such as human interference, altitude, slope, topography and chemical properties of soil, and also analyzed the life form by each community. As a result, the Ainsliaeo-Quercetum mongolicae was judged as the most stable community among the forest communities identified here. On the other hand, a division of cluster analysis based on the dominance of the component species, appeared similar to the community units classified phytosociologically. Thus, it is inferred that the survey area will be dominated by the potential natural vegetation, Ainsliaeo-Quercetum mongolicae finally, if progressive succession is advanced continuously.

• Journal of Korea Water Resources Association
• /
• v.46 no.11
• /
• pp.1069-1078
• /
• 2013

The Bangudae Petroglyphs, national treasure No. 285 is located within submerged upper districts of Sayeon dam supplying the main residential water in Ulsan. Of the many ways for the reservation of Petroglyphs located the altitude at 53~57 m, the plan that we take it out of the water lowering the water level from 60 m to 52 m has been examined mainly in case of controlling artificially the water level of the dam. In this paper, we examined expected problems from the loss of dam function and the change of water quality from water deterioration caused by the water level control of the Sayeon dam. Using the model of Vollenweider and CSTR (Continuous Stirred Tank Reactor), we analyzed the density change of BOD and COD, representative water quality index and the TP and TN, the main reason of algae growth. The result showed that the density of COD lowered a little but the density of TP and TN went up over 130% when controlling the water level from 60 m to 52 m. These changes cause a serious algae problem and if doing the water quality management as the density of TN and TP, the water quality would become worse. Water storage and supply residential water decreases, and the water quality becomes worse because of eutrophic state.