• 제목/요약/키워드: environmental VOCs

검색결과 654건 처리시간 0.028초

복합열산화(Hybrid Thermal Oxidation) 시스템을 이용한 MEK(Methyl ethyl ketone)와 Toluene 제거 평가 (Evaluation of Hybrid Thermal Oxidation(HTO) System for Removal of MEK(Methyl ethyl ketone) and Toluene)

  • 장두훈;배우근;김문일;김경태
    • 한국지반환경공학회 논문집
    • /
    • 제11권6호
    • /
    • pp.31-37
    • /
    • 2010
  • 본 연구에서는 multi-bed 플레이트로 폐열재생 부분과 촉매반응 부분으로 구성되어 있는 복합열산화 시스템(Hybrid Thermal Oxidation System)을 이용하여 저온에서 주입 밸브 교체 시간간격과 유입유량을 변화시켜 VOCs(MEK와 Toluene) 제거를 평가하고자 하였다. $350^{\circ}C$의 연소온도 조건에서 VOCs는 완전히 전환되었으며 당량비에 따른 전환율 또한 100%에 근접하였고, HTO 시스템의 연소실은 좌우측의 온도가 균형을 이루며 열효율이 매우 높아 폐열회수 및 재생이 효율적이었다. 주입 밸브 교체 시간간격과 유입 유량 변화에 따른 HTO시스템에서의 VOCs 제거 효율은, MEK와 Toluene 모두 안정적으로 높은 91.1~97.4%의 효율을 나타내었으며, 보조연료량 증가보다는 밸브교대시간을 길게 하였을때 제거 효율이 증가하는 경향을 보여 보조연료량 증가보다 밸브교대시간을 증가시키는 것이 제거 효율을 높이는데 효율적으로 판단된다. 이와 같은 연구결과를 고려할 때 HTO시스템은 저농에서도 VOCs 제거, 특히 MEK과 Toluene 제거에 매우 안정적이며 콤팩트한 시스템으로 판단되며, 적은 설치 부지로 중소기업이 요구하는 새로운 VOCs 제거 시스템으로 적용 가능하리라 판단된다.

상태방정식을 이용한 주유소 탱크에서의 유증기 배출량 산정법에 관한 연구 (A Study on the Calculation Method of VOCs Emissions Using Equation of State in the Gas Station Tank)

  • 박태준;오휘성;이창언
    • 한국연소학회지
    • /
    • 제20권4호
    • /
    • pp.42-48
    • /
    • 2015
  • This study was investigated the estimation of VOCs (Volatile Organic Compounds) emission from a gas station tank. To improve the atmosphere environmental quality near the gas station, the installation of vapor recovery system has been expanded recently. Therefore, it was necessary to calculate VOCs emissions from the gas station tank with vapor recovery systems for evaluation of their performance. The VOCs emissions are difficult to measure directly because of various sources and irregularly emission by pressure rise. In this study, VOCs emissions were estimated by simple calculation based on the equation of state for measured pressure, temperature and volume of a gasoline tank at a gas station. The result confirmed that the present national emission factor did not have significant discrepancy with the calculated value.

VOCs 연소용 Mn-PC 촉매 특성 (Catalytic Characteristics of Mn-PC for VOCs Combustion)

  • 서성규;마충곤;류의;윤형선;김상채
    • 대한환경공학회지
    • /
    • 제33권4호
    • /
    • pp.237-242
    • /
    • 2011
  • 본 연구에서는 Mn-PC 촉매와 상압유통식 반응장치를 이용하여 $200{\sim}380^{\circ}C$ 범위에서 VOCs(아세트알데히드, 프로피온알데히드, 톨루엔) 연소반응을 수행하였다. 촉매 전처리(air, $450^{\circ}C$, 1 hr, 60 cc/min) 전 후의 물리화학적 특성변화 조사는 TGA (Thermogravimetric Analyzer), BET (Brunauer Emmett Teller), EA (Elemental Analyzer), XRD (X-ray Diffractometer) 및 SEM (Scanning Electronic Microscope)을 이용하여 파악하였다. TGA 분석결과 Mn-PC의 열중량(공기 분위기) 감소는 $419^{\circ}C$에서 88 wt.%를 나타내었으며, 전처리 후 비표면적은 크게 증가하는 것으로 확인되었다. EA 분석결과 전처리를 통해서 유기물 성분은 분해 또는 연소되어 거의 관찰되지 않는 것으로 파악되었다. 또한 XRD분석을 통해 Mn-PC 촉매가 전처리 후 새로운 형태의 산화물인 $Mn_3O_4$로 전이됨을 확인하였다. 그리고 SEM 분석결과 전처리 과정에서 많은 micropore가 생성된 것으로 관찰되었다. 프로피온알데히드 연소의 경우 전처리한 Mn-PC는 $Mn_3O_4$와 fresh한 Mn-PC 보다 우수한 촉매활성을 나타내었다. 전처리된 Mn-PC상에서 VOCs 연소 효과는 톨루엔 < 아세트알데히드 < 프로피온알데히드 순서로 나타났다.

네일샵미용실의 실내공기 중 미세먼지(PM10), 휘발성 유기화합물 (VOCs), 알데하이드류(Aldehydes)의 농도 및 업소 특성에 따른 상관성 분석 (Characteristics of PM10, VOCs and Aldehydes Levels in Nail and Hair Shops)

  • 이보람;곽수영;양원호;전상일;김정수;이기영
    • 한국환경보건학회지
    • /
    • 제43권6호
    • /
    • pp.509-515
    • /
    • 2017
  • Objectives: The purpose of this study was to assess the indoor levels of $PM_{10}$, VOCs and aldehydes in nail shop and hair salon. Methods: The field survey was conducted for 52 hair salons 52 nail shops, and 26 shop-in-shops in Seoul and Daegu city. The field technicians investigated characteristics of each shop including operating time, indoor volume, ventilation and so on. Indoor concentrations of $PM_{10}$, VOCs and aldehydes, indoor temperature and humidity were measured in 12 hair salons, 12 nail shops and 6 shop-in shops. MP Surveryor II (Graywolf, USA) was used to measure $CO_2$ concentration, temperature and humidity for 8 hours. $PM_{10}$ concentrations were measured by minivolume air sampler with Teflon quartz filter ($0.2{\mu}m$ pore size, ${\varphi}$ 47 mm, Graseby-Anderson TEF-DISKTM) for 6 hours. VOCs passive sampler (OVM 3500) was used to collect VOCs for 8 hours and analyzed by GC/MSD. Results: The $CO_2$ concentrations were $759.4{\pm}58.2$ ppm in nail shops, $731.0{\pm}72.5$ ppm in hair salons, and $656.4{\pm}31.2$ ppm in shop-in-shops. The $PM_{10}$ concentrations were $27.5{\pm}14.2{\mu}g/m^3$ in nail shops, $33.1{\pm}6.3{\mu}g/m^3$ in hair salons, and $39.0{\pm}26.9{\mu}g/m^3$ in shop-in-shops. TVOCs concentrations were $3085.4{\pm}1667.8{\mu}g/m^3$ in nail shops, $2131.1{\pm}617.3{\mu}g/m^3$ in hair salons, and $1550.3{\pm}529.0{\mu}g/m^3$ in shop-in-shops. TVOCs concentrations in nail shops were significantly higher than those in hair salons and shop-in-shops (p=0.002). Formaldehyde concentrations were $60.8{\pm}36.6{\mu}g/m^3$ in nail shops, $89.1{\pm}55.4{\mu}g/m^3$ in hair salons, and $45.1{\pm}22.5{\mu}g/m^3$ in shop-in-shops. Conclusion: TVOCs concentrations in nail shop were the highest among others. TVOC concentrations in all stores exceeded indoor air quality stand of indoor air quality control in public-use facilities, etc act.

하수관거 및 토구에서 발생하는 휘발성 유기화합물 악취 특성 (Odor Characteristics and Concentration of Malodorous Volatile Organic Compounds Emitted from a Sewer and Its Outlet)

  • 박상진;권수열
    • 한국환경보건학회지
    • /
    • 제43권6호
    • /
    • pp.457-466
    • /
    • 2017
  • Objectives: This study was carried out to investigate the characteristics of volatile organic compounds (VOCs) emitted from sewerage facilities such as a sanitary sewers, outlets, and catch basins. In addition, the dominant malodorous VOCs among the compounds in this study were studied. Methods: Waste gas samples were collected at 27 points in a sanitary sewer in commercial and residental areas. The concentrations of seven volatile organic compounds, including benzene and toluene, in the samples were analyzed by gas chromatograph mass spectrophotometer (GC/MS). Odor concentrations were estimated using the concentration data of the VOCs and each compound's threshold limit value. Results: As a result, it appeared that the average concentration of total observed data for acetaldehyde was 15.98 ppb and benzene 1.87 ppb, toluene 82.31 ppb, ethyl benzene 63.12 ppb, m+p-xylene 15.66 ppb, oxylene 18.73 ppb, and styrene 4.39 ppb. VOC concentrations in the commercial area were higher than those in the residential area. VOC concentrations of waste gas emitted from sewer lines was also higher than those at the outlet and in the catch basins. It was estimated that the main malodorous VOC among the seven VOCs was acetaldehyde. Conclusions: As there is little data on VOC concentrations inside sewer facilities in Korea, these data will be helpful for estimating impact assessment of VOCs and establishing a counter-plan for the abatement of VOCs from sewer facilities in the future.

Bioscrubber Trickling Filter(BSTF)의 VOCs 제거 및 운전 특성에 관한 연구 (A Study on the Removal Efficiency of VOCs and Operating Characteristics by Using of Bioscrubber Trickling Filter(BSTE))

  • 박진도;서정호;이학성
    • 한국환경보건학회지
    • /
    • 제31권4호
    • /
    • pp.309-315
    • /
    • 2005
  • Volatile organic compounds (VOCs) and odor materials are major sources of air pollution in Ulsan city, where much chemical plants are located. Therefore, it is necessary to develop a new reactor which can remove VOCs and odor materials effectively and be equipped at the end of pipe easily. A modified reactor (bioscrubber trickling filter, BSTF), which have both characteristics of biofilter and bioscrubber, was developed and tested on its reactivity with several VOCs using two types of media, fiber and activated carbon 4- ceramic(A/C). It was observed that the removal efficiencies of several types of VOCs such as acetaldehyde, ethylalcohol, butanol, diethylamine and triethylamine were up to $95\%$ when they had about 100 ppm of initial concentration and 80 seconds of residence time. Good attachment of microorganisms to both media, where it is thought the reaction efficiency can be determined according to the amount of microorganisms attachment, observed with scanning electron microscopy(SEM). Initial pressure drops of the packed bed with both media were 229 $mmH_2O/m$ at A/C column and 670 $mmH_2O/m$, respectively. However, maximum pressure drop of fiber column during the operation was over 1,647 $mmH_2O/m$. Therefore, it was thought that the fiber material would not suitable to use in the local plant as a packed bed media.

접착제 취급 작업장 내 공기정화 설비를 이용한 휘발성 유기화합물 저감 평가 (Assessment of Volatile Organic Compound Reduction Using an Air Purification Facility in an Adhesive Handling Process)

  • 우재민;김동준;신지훈;민기홍;이채관;양원호
    • 한국환경보건학회지
    • /
    • 제49권2호
    • /
    • pp.78-88
    • /
    • 2023
  • Background: Exposure to volatile organic compounds (VOCs) can have acute and chronic health effects on human beings in general and in working environments. In particular, VOCs are often emitted in large quantities in industrial settings. In such circumstances, there is a need to improve the indoor air quality at workplaces. Objectives: The purposes of this study were to verify the effectiveness of air cleaning devices in workplaces and provide alternative solutions for improving working environments. Methods: Personal exposure and area level of VOCs for workers were evaluated in a car-part adhesive process before and after installing an air cleaning device with a TiO2-coated filter. Passive samplers and direct reading instruments were used to collect and analyze the VOCs, and the removal efficiency and improvement of air quality were evaluated. We also calculated the exposure index (EI) to assess the risk level in the workplace. Results: The removal efficiency for VOCs through the installation of the air cleaning device was approximately 26.9~69.0% as determined by the concentration levels before and after installation. The measured substances did not exceed the exposure limits for the work environment and the EI was less than 1. However, carcinogenic substances such as benzene, formaldehyde, carbon tetrachloride, and trichloroethylene were detected. Conclusions: The application of an air cleaning device can be a solution for controlling the indoor air quality in a workplace, particularly in cases where ventilation systems cannot be installed due to process limitations.

반도체 작업환경의 VOCs 농도분포 특성 (Emission Characteristics of VOCs Distributions in Semiconductor Workplace)

  • 이정주
    • 한국도시환경학회지
    • /
    • 제18권4호
    • /
    • pp.503-509
    • /
    • 2018
  • 본 연구에서는 양자전이 비행시간질량분석기(PTR-ToF-MS)를 이용하여 반도체 공정의 작업환경(PHOTO, FPD, OLED, WET 공정)에서 VOCs를 실시간으로 모니터링하였다. 작업환경에서 평균 VOCs 농도는 PHOTO 6.5 ppm, FPH 6.4 ppm, WET 2.0 ppm, OLED 1.3 ppm이었다. VOCs 중 methyl ethyl ketone이 2.8 ppm (69%), acetaldehyde가 0.5 ppm (13.2%)로 나타났다. 반도체 공정 특성에 따라 다양한 VOCs 가 작업환경에서 관측되었다. 관측된 VOCs 농도는 작업환경기준보다 낮지만, 이러한 VOCs를 지속적으로 모니터링하여 효과적으로 관리해 나갈 필요가 있다.

산업단지 VOC 저감 최적가용기법(BAT) 선정을 위한 다매체 거동모델 기반 인체위해성·환경성·경제성 평가 (Human Health Risk, Environmental and Economic Assessment Based on Multimedia Fugacity Model for Determination of Best Available Technology (BAT) for VOC Reduction in Industrial Complex)

  • 김예린;이가희;허성구;남기전;리첸;유창규
    • Korean Chemical Engineering Research
    • /
    • 제58권3호
    • /
    • pp.325-345
    • /
    • 2020
  • 본 연구에서는 다매체 퓨가시티 모델을 기반으로 Volatile organic compounds (VOCs) 방지기술의 인체위해성·환경성·경제성 평가를 수행하여 석유화학 산업단지 내 VOCs 저감을 위한 최적가용기법(Best available technology, BAT)을 선정하였다. 다매체 퓨가시티 모델을 이용하여 U-city에 소재한 석유화학 산업단지에서 배출되는 VOCs 중 Benzene, Toluene, Ethylbenzene, Xylene (BTEX)의 다매체 거동 특성과 잔류농도 분포를 예측하였다. 매체 통합 인체위해성 평가 및 민감도 분석을 이용해 BTEX의 물질별 인체위해성을 예측하고 주요 영향 변수를 규명하였으며, 다매체 환경시스템 내 잔류농도 기준의 환경성 평가와 비용-편익 경제성 평가를 수행하여 우수환경관리기법군(BAT군)을 선정하였다. BTEX의 다매체 거동 분석 결과, 토양 매체에서 높은 잔류 분포 특성(60%, 61%, 64%, 63%)을 보였으며, Xylene은 모든 다매체 환경에서 가장 높은 잔류성을 보였다. BAT후보군 중에서 흡수법은 가장 높은 인체위해성을 보여 BAT 선정에서 제외하였으며, 민감도 분석 결과 대기 매체에서의 물질 반감기와 경로별 노출계수가 인체위해성과 높은 상관성이 있는 것으로 판단되었다. 환경성 평가와 비용-편익 경제성 평가를 고려하여, 재생 열산화법, 재생 촉매산화법, 바이오 필터법, UV 산화법, 활성탄 흡착법을 석유화학 산업단지 내 VOCs 저감을 위한 BAT군으로 선정하였으며, 본 연구에서 제시한 매체통합적 접근 방식의 BAT 선정 방법론은 사업장에서 오염물질 저감을 위한 최적의 배출시설 선정과 통합환경관리제도 운영에 기여할 수 있을 것으로 기대된다.