• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.585-588
• /
• 1997

This paper presents a construction method of logic-based switching control system which operates in widely changing environments. The logic-based switching controller is composed of a family of candidate controllers together with a supervisor. The system does not require any identification schemes of environments. Switching from one candidate controller to another is carried out based on monitoring the output of the system. The basic ideas of adaptation are as follows: (1)each candidate controller is prepared for each environment in advance; (2)the supervisor applies a sequence of speculative controls to a plant with candidate controllers just after the control has started and just after the change of the environment has been detected. It is important that each candidate controller can keep the system stable during a sequence of speculative controls, and the most appropriate candidate controller for the environment to which the system is exposed can be selected before the last speculative control is ended. An application to an antiskid braking system clarifies the effectiveness of the proposed method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.560-563
• /
• 1997

The conventional impedance control has been known to have the following problems: it has lack of specifying force directly and unknown environment stiffness has to be known priori in order to specify the reference trajectory. In this paper, new impedance force control that can control a desired force directly under unknown stiffness is proposed. A new nonlinear impedance function is developed based on estimation of unknown stiffness from force and position measurements. The nonlinear characteristics of the proposed impedance function are analyzed based on unknown environment position. Simulation studies with robot manipulator are carried out to test analytical results.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.638-641
• /
• 1992

In this paper, a hybrid position/force control scheme is proposed. The control scheme modifies the position command for force control against constraint surface of environment and is very simply designed and implemented. The merits of the control scheme are that it can cope with change of constraint conditions and small position inaccuracy of the environment. A constraint surface position observer is also proposed to reduce disturbances on controlled force.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.473-477
• /
• 1993

Improving the legal system is one of the key points in strengthening the control of environment . The coordination of economic development with environment protection and the legislation in Guangdong since 1980 is described. Some proposals for stimulating the economy by enhancing the environment protection in accordance with the law are offered.

• 한국생물환경조절학회:학술대회논문집
• /
• 한국생물환경조절학회 2004년도 춘계학술대회 논문집
• /
• pp.172-175
• /
• 2004

• 한국생물환경조절학회:학술대회논문집
• /
• 한국생물환경조절학회 1997년도 가을 심포지움 및 학술논문발표요지
• /
• pp.14-19
• /
• 1997

식물의 광반응은 광질과 광강도에 따라 상이하며, 광은 열을 동반하게 되므로 광만을 분리하여 생각할 수 없다. 즉, 광은 식물체의 체온과 엽온을 높이고, 잎의 수증기 장력을 증가시켜 증산을 촉진하므로 기화열을 발생하는 원동력이 되기도 한다. 따라서 광은 잎속의 수분이나 기공개도 등에 영향을 주기 때문에 광합성속도에 간접적인 영향을 미치기도 한다. (중략)

• 한국지능시스템학회논문지
• /
• 제19권3호
• /
• pp.388-397
• /
• 2009

로봇 매니퓰레이터를 이용한 대부분의 작업은 환경과의 상호작용을 요구하며, 위치제어, 충돌제어 그리고 힘제어로 구성된다. 위치제어는 환경에 도착하는 방법을 의미하고, 환경에 접촉하는 순간은 충돌제어 문제를 야기하며, 힘제어는 환경과의 충돌후에 원하는 힘궤적을 유지하는 것이다. 이러한 세 가지 제어문제는 순차적으로 발생하므로, 각각의 제어 알고리즘은 독립적으로 개발되어야 한다. 특히 여자유도 매니퓰레이터에서 이러한 세 가지 제어문제는 독립된 중요한 연구 주제이다. 예를 들어, 관절 토크 최소화와 충격힘 최소화는 여자유도 매니퓰레이터의 대표적인 연구주제이다. 본 논문에서는 단일 작업을 통하여 세 가지 제어문제를 구성하였다. 위치제어는 각 관절의 토크와 토크변화 그리고 충돌 시의 충돌힘 최소화를 위하여 개발되었다. 따라서 충돌제어의 초기조건은 이전의 위치제어 알고리즘으로부터 최적화 되고, 그러한 제어 전략은 충돌제어의 결과를 개선시킨다. 유사하게, 힘제어 문제의 초기조건은 이전의 위치제어와 충돌제어로부터 간접적으로 최적화된다. 힘제어 알고리즘은 각 관절 토크와 힘외란 최소화시키는 개념을 사용하였다. 모의실험 결과는 제안된 알고리즘의 타당성을 보여준다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.1190-1195
• /
• 2005

Biomass burning is a source of greenhouse gases, carbon dioxide, methane, and nitrous oxide. Under the ideal conditions of complete combustion, the burning of biomass produces carbon dioxide and water vapor. Since complete combustion is not achieved under any conditions of biomass burning, other carbon species, including carbon monoxide, methane, non-methane hydrocarbons and particulate carbon are produced. In this study, we analyze the combustion characteristics of rice-husk, such as heat release rate, smoke production rate, the percentage variation of CO and $CO_2$, oxygen consumption rate, and mass loss under different heat fluxes (20, 50 and 70kW). As a result, at 20kW incomplete combustion is occurred so that the percentage of CO is high in initial burning and total smoke release is higher than the others. At 50kW and 70kW, the combustion behaviors is very similar except the variation of CO percentage.

• 한국소음진동공학회논문집
• /
• 제25권10호
• /
• pp.707-713
• /
• 2015

This paper proposes experimental results for control performance deterioration of a piezoelectric actuator under high temperature conditions due to external heat environment. In this work, a heat environment from 30 ℃ to 190 ℃ is established by a heat chamber which is capable of high temperature of heat environment. Inside the heat chamber, an experimental apparatus consisting of the stack type of piezoelectric actuator, laser sensor, gap sensor and temperature sensor is established. After evaluating temperature dependent blocking force, displacement and time response of a piezoelectric actuator inside the heat chamber, tracking control performances are evaluated under various temperature conditions via proportional-integral-derivative(PID) feedback controller. The desired position trajectory has a sinusoidal wave form with a fixed frequency. Control performances are experimentally evaluated at both room temperature and high temperature and presented in time domain.

• 생물환경조절학회지
• /
• 제15권1호
• /
• pp.1-7
• /
• 2006

This study was conducted to develop a system and an control algorithm for control the environment of a plant factory. The greenhouse control system for environmental control was largely composed of a computer and a PLC. The screen of control program was composed of a greenhouse figure which was included machinery and equipments for greenhouse, the graph of environmental factors of inside greenhouse and the image of greenhouse. In order to reduce temperature change, the operation time of ventilation window was changed by 3 stage according to difference between a target and present temperature. When is heating, a temperature variation was shown to be $16.7{\pm}0.8^{\circ}C$. When is cooling, a temperature variation was shown to be $23.1{\pm}0.6^{\circ}C$. When is humidifing, a humidity variation was shown to be $39.3{\pm}1.6^{\circ}C$ %RH. An environmental control system and a control algorithm were proved that it was shown a good performance in a control accuracy. So a computer control system should be adapted to a control system of a greenhouse and a plant factory.