• 한국전산유체공학회:학술대회논문집
• /
• 1998.11a
• /
• pp.167-174
• /
• 1998

The numerical methodology for simulating water entry behaviors of the high-speed bodies has been developed. Since the present method assumed the impact occurs within a very short time interval, the viscous effects do not have enough time to play a significant role in the impact forces, that is, the flow around a water-entry object was assumed as an incompressible potential flow and is solved by the source panel method. The elements fully submerged into the water are routinely teated, but the elements intersected by the effective planar free surface are redefined and reorganized to be amenable to the source panel method. To validate the present code, it has been applied to the ogive model and compared with experimental data. Good agreement has been obtained. The water entry behavior of the bouncing phenomena from the free surface has been also simulated using the impact forces and two degree of freedom dynamic equation. Physically, acceptable results have been obtained.

• Korean Journal of Metals and Materials
• /
• v.50 no.2
• /
• pp.129-135
• /
• 2012

High speed casting technology is an attractive method to increase the productivity of continuous casting. However, high speed casting causes flow instability of molten steel in a mold. In this study, Large Eddy Simulation (LES) has been performed to identify the characteristics of mold flow for various shapes of submerged entry nozzles. The LES code has been newly developed to efficiently compute the two-phase flow by using the Fractional Step Method (FSM) combined with the Volume of Fluid (VOF) method. The Immersed Boundary Method was used to implement the shape of the submerged entry nozzle. Three cases of discharge angle of the submerged entry nozzle were computed and compared. The current results shed light on improving shape design of a submerged entry nozzle.

• Journal of Mechanical Science and Technology
• /
• v.14 no.5
• /
• pp.562-568
• /
• 2000

The pressure in a water-entry induced cavity, is analyzed up to the closed cavity (bubble). Water-entry is a highly transient phenomenon, and the evolution of the water-entry cavity must be explained by considering the entry speed, shape of the solid body, atmosphere pressure, and cavity pressure as the primary variables. This work is an extension of the cavity dynamics model recently reported by Lee (l997a). To extend the model for a wide range of entry speeds the cavity pressure is calculated from a one-dimensional quasi-steady flow model. The estimation of the cavity pressure allows us to explain the experimentally observed surface closure phenomena at low entry speeds. Predictions for the time of surface closure are compared with the published experimental data.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.11 no.1
• /
• pp.482-494
• /
• 2019

In this paper, the oblique water-entry impact of a vehicle with a disk cavitator is studied experimentally and numerically. The effectiveness and accuracy of the numerical simulation are verified quantitatively by the experiments in this paper and the data available in the literature. Then, the numerical model is used to simulate the hydrodynamic characteristics and flow patterns of the vehicle under different entry conditions, and the axial force is found to be an important parameter. The influences of entry angle, entry speed and cavitator area on the axial force are studied. The variation law of the force coefficient and the dimensionless penetration distance at the peak of the axial force are revealed. The research conclusions are beneficial to engineering calculations on the impact force of a vehicle with a disk cavitator over a wide range of water-entry parameters.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.2
• /
• pp.25-32
• /
• 2013

Entry speed of the vehicle and lateral acceleration acting on the vehicle, roll-angle associated with the overthrow, and then the structure of the road, the friction of road surface are important factors in turning on the curved road. In this study, we analyzed the state change of the vehicle causing entry speed of the vehicle and superelevation of the road, the friction coefficient by using a PC-crash Program for traffic accident reconstruction. As a result, when vehicle is turning the curved road, we could ascertain that the structure of the road and state of the road surface are a major factor about the set up of limited speed.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.4
• /
• pp.30-37
• /
• 2007

In this paper, Water Entry Point Selection Algorithm(WEPSA) for selecting an optimal Water Entry Point of anti-submarine missiles which maximizes Detection Probability about a given target was investigated. WEPSA is a method which decides the position of an optimal Water Entry Point with calculating the target Detection Probability of a torpedo in the whole domain which centered by the target, performing the Monte-Carlo Simulations which include errors for the target informations and for weapon delivery. We can decide an optimal Water Entry Point of anti-submarine missiles which maximizes Detection Probability about a given target with WEPSA, if we get target informations about target range, target bearing, target speed and target course from Combat Systems.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.6
• /
• pp.111-118
• /
• 2004

The work presented in this paper concerns the aerodynamic characteristics and compression wave generated in a tunnel when a high speed train enters it. A large number of solutions have been proposed to reduce the amplitude of the pressure gradient in tunnels and some of the most efficient solutions consist of (a) addition ofa blind hood, (b) addition of inclined part at the entrance, and (c) holes in the ceiling of the tunnel. These are numerically studied by using the three-dimensional unsteady compressible Euler equation solver with ALE, CFD code, based on FEM method. Computational results showed that the smaller inclined angle leads to the lower pressure gradient of compression wave front. This study indicated that the most efficient slant angle is in the range from $30^{\circ}$ to $50^{\circ}$. The maximum pressure gradient is reduced by $26.81\%$ for the inclined angle of $30^{\circ}$ as compared to vertical entry. Results also showed that maximum pressure gradient can be reduced by $15.94\%$ in blind hood entry as compared to $30^{\circ}$ inclined tunnel entry. Furthermore, the present analysis showed that inclined slant angle has little effect on aerodynamic drag. Comparison of the pressure gradient between the inclined tunnel hood and the vertical entry with air vent holes indicated that the optimum inclined tunnel hood is much more effective way in reducing pressure gradient and increasing the pressure rise time.

• Design & Manufacturing
• /
• v.17 no.2
• /
• pp.9-14
• /
• 2023

In this study, an experiment was conducted to confirm the applicability of the external shape control of the ultrasonic knife to the CFRTP material, which is the base material of thermoplastic. TC910 based on polyamide6 (PA6) was used as the material. The slope 와 and tool transfer speed of the material and tool were selected as process factors for processing, and the following results were obtained. Under all cutting conditions using an ultrasonic knife, friction heat caused by high-frequency vibration was issued at 150℃ at the contact part between the material and the knife during cutting. As a result of the cutting force analysis, the faster the transfer speed, the higher the cutting force as the angle of entry of the blade increased, and the size of the cutting force changed during cutting. As for the size of the burr in accordance with the transfer speed condition, the smallest burr occurred at 150mm/min in the side part, and the smallest burr occurred at 150mm/min and 200mm/min in the case of the outlet burr. The size of the burr according to the entry angle tended to decrease as the tool entry angle increased, and the side part tended to increase as the tool entry angle increased. As a result of the cutting surface analysis, it was confirmed that the base material was eluted under all conditions, and the faster the transfer speed, the lower the elution phenomenon of the base material. Based on the above results, cutting the CFRTP material with an ultrasonic knife is possible, but the effect on heat generation caused by friction needs to be minimized, and further research needs to be conducted on this.

• Journal of the Korean Society of Safety
• /
• v.32 no.5
• /
• pp.135-140
• /
• 2017

This study deals with the safety of roundabout. The purpose of this study is to analyze the factors affecting the pedestrian accidents of roundabout near schools. In pursuing the above, this study gives particular attentions to comparatively analyzing the pedestrian accident by number of entry and circulatory lane. The traffic accident data from 2013 to 2015 are collected from TAAS data set of Road Traffic Authority. To develop the pedestrian accident model, the Poisson and negative binomial models has been utilized in this study. Such the dependent variable as the number of pedestrian accidents and the 24 independent variables as geometry, traffic volume and others are used. The main results are as follows. First, 3 Poisson and 2 negative binomial models(${\rho}^2$ of 0.153~0.426) which are all statistically significant are developed. Second, the common variable of models based on the number of circulatory roadway lane is analyzed to be the entry lane width and that of the number of entry lane is evaluated to be the design speed. Also specific variables are evaluated to splitter island, roundabout sign, number of approach road, bus stop and elementary school. Finally, the design speed might be expected to decrease the number of pedestrian accidents near schools.

• Proceedings of the KSR Conference
• /
• 2009.05b
• /
• pp.483-488
• /
• 2009

When a train enters into the tunnel with high speed, a compression wave generated inside the tunnel has been studied as a one-dimensional phenomenon. However, one-dimensional approach can't analyze 3-dimensional flow effect in the vicinity of the train body. In this research, so as to overcome this weak point, a prediction method of the wavefront of a compression wave using steady state solution has been used for the parametric study considering 3-dimensional effects of the interactions between trains and tunnels. The effective hood shapes were deduced in both cases of the train's entry into the tunnel on the single track and on a side of the double track. As a result, in case of the train's entry on a side of the double track, the increase of compression wave value propagated to the tunnel inside have appeared compared with the train's entry on the single track. Also, a horizontally convex elliptic hood shape is more effective at the train's entry on a side of the double track for the purpose of a decrease of wavefront gradient of a compression wave.