• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.5D
• /
• pp.467-476
• /
• 2010

Travel delay (TD) denotes a time difference between the running time of vehicle with a normal speed and the travel time of vehicle with a reduced speed for traversing the same segment of roadway, and is sometimes used as a measure of time delayed in the junction or bottleneck areas of roadway. Urban freeways in the foreign countries are often suffering from traffic delay within the entrance and exit ramp junction influence areas, as a freeway with the speed limit of 80 km/h or higher only during the rush hours, but those in our country are especially experiencing severe traffic delay on the mainline segments as well as within the entrance and exit ramp junction influence areas, as a freeway with the speed limit of 80 km/h or less regardless of the rush hours. So, the purpose in this study is to develop the models that could predict the travel delay within the ramp junction influence areas of urban freeway having the geographical features which differ from the expressway, and also examine the validity of the travel delay predictive models developed.

• International Journal of Highway Engineering
• /
• v.14 no.2
• /
• pp.109-116
• /
• 2012

This study is aiming to separate highway entrance ramps from impact zones which are considered the characteristics and real traffic situations in each lane and section. The results of this study can be applied to Lane Control System and control the traffic flow for highway more efficiently. Based on earlier studies which analyzed impact zones in entrance-ramp junction using the standard deviation of speed, this study divides more segmentalized impact zones according to the degree of turbulences. As a result of this study, about 800m of intervals, from 500m of upper flow (1,2,3 lane) to 300m of lower flow(2, 3 lane), shows similar traffic characteristics influenced by entrance ramp directly.

• International Journal of Highway Engineering
• /
• v.15 no.1
• /
• pp.143-154
• /
• 2013

PURPOSES: Design of approach roads of rest areas in highway has many drawbacks such as geometric design elements. There has been traffic accidents occured in these approach roads of rest areas. Thus, design criteria is required in order to protect accidents from being occurred. In case of Korea, geometric structure design criteria of entry facilities, such as toll-gate, interchange, junction etc was established. However there are no presence in a detailed standards for geometric structure of the rest area which affiliated road facilities. METHODS: In this study, analytic on accidents was carried out in regards to the entry of geometric structure of resting areas by utilizing a sight survey and an investigation research of traffic accidents. The survey was targeting 135 general service areas. Collisions with physical channelization and safety facilities occurred due to speeding, rapid entry, and etc at the entrance nose section. At the entrance connector roads, accidents caused by speeding, negligence, over-operation of handle of drivers were main reason of accidents. Discriminant analysis were conducted about geometric elements to distinguish influencing factors for traffic accidents. the lengths and access angles of the entrance connector roads were regarded as to have the high relation with traffic accidents. RESULTS: After classifying the design section of resting areas' entry as well as derive design elements on each section, a speed measurement by targeting entry of rest areas and car behavior surveys were performed, then each element's minimum standard was derived through the analyses. According to the speeds at the starting/end point of entrance connector road, the range of the junction setting angle of the entrance connector road is defined as $12^{\circ}{\sim}17^{\circ}$ and the connector length model was suggested. CONCLUSIONS: Suggest improvement plans for existing rest areas that can be applied realistically. This should be corresponded to the standards of entry and exit of developed rest areas.

• International Journal of Highway Engineering
• /
• v.14 no.3
• /
• pp.173-182
• /
• 2012

Entry and exits of the rest area are sections where designed speed can be rapidly change and also a weak traffic safety section. In addition, two tasks can be performed simultaneously at entry of the rest area, particularly searching for deceleration and parking spaces/parking sides etc. Thus, design criteria is required in order to procure the stability of accessed vehicle. In case of Korea, geometric structure design criteria of entry facilities, such as toll-gate, interchange, junction etc was established. However there are no presence in a detailed standards for geometric structure of the rest area which affiliated road facilities. In this study, Derive problems in regards to the entry of geometric structure of resting areas by utilizing a sight survey and an investigation research of traffic accidents. The survey was targeting 135 general service areas. After Classifying the design section of resting areas' entry as well as derive design elements on each section, a speed measurement by targeting entry of rest areas and car behavior surveys were performed, then each element's minimum standard was derived through the analyses. According to the speeds at the starting/end point of entrance connector road, the minimum length of the entrance connector road is decided as 40m using Slowing-down length formula and based on the driving pattern, the range of the junction setting angle of the entrance connector road is defined as $12^{\circ}{\sim}17^{\circ}$. Suggest improvement plans for existing rest areas that can be applied realistically. This should be corresponded to the standards of entry and exit of developed rest areas.

• Journal of Korean Society on Water Environment
• /
• v.33 no.6
• /
• pp.617-625
• /
• 2017

Both domestic and overseas urban drainage systems have been actively researched to solve the problems of urban flash floods and the flood damage that is caused by local downpours. Recent urban planning has been designed to better manage the floods of decentralized rainfall-management systems, and the installation of green infrastructure and low-impact development (LID) facilities at national ministries has been recommended. In this study, we use the EPA SWMM model to construct a decentralized rainfall-management network for each small watershed, and we analyze the effect of the drainage-capacity improvement from the installation of the LID technologies in vulnerable areas that replaces the network-expansion process. In the design of the existing urban piping systems, it is common to increase the pipe size due to the increment of the impervious area, the steep terrain, and the sensitive entrance-ramp junction; however, the installation of green infrastructure and LID facilities will be sufficient for the construction of a safe urban drainage system. The applications of LID facilities and green infrastructure in urban areas can positively affect the recovery of the corresponding water cycles to a healthy standard, and it is expected that further research will occur in the future.