• 터널과지하공간
• /
• 제6권3호
• /
• pp.245-249
• /
• 1996

In this study, the flow field and the recirculation phenomena are investigated numerically for the model around a tunnel entrance and exit. It turns out that the air entering to the tunnel entrance comes mostly from the upper region of the entrance implying that maintaining the air clear in that region is important for the inside-tunnel ventilation. We also found that the recirculation of the exhaust gas from the exit to the entrance has a maximum effect when the flow velocity at the exit is somewhat lower than that of the entrance.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2009년도 추계학술대회
• /
• pp.175-176
• /
• 2009

기존 항만출입 신청서식 및 출입증발급업무는 각 항만별, 부두별로 신청, 검토, 발급의 공통된 프로세스를 가지고 있지만, 표준화된 서식과 발급업무가 구축되어 있지 않아 사용자의 혼란을 증가시키고 있다. 이러한 문제점을 해결하기 위해, 기존 인원 및 차량의 항만출입 신청서식 및 출입증발급업무에 대한 조사 분석을 통하여 항만출입 신청서식과 출입증발급업무에 대한 표준안을 제시하여 효율적인 프로세스를 제공하고자 한다.

• 한국콘텐츠학회논문지
• /
• 제20권3호
• /
• pp.31-40
• /
• 2020

정부의 축산업 및 축산차량 등록제 실시로 인하여, 양돈농가에서는 의무적으로 출입구에 차단장치를 설치하여야 하며 출입기록을 관리하여야 한다. 또한, 양돈장의 생물보안을 위해서도 출입인원과 차량, 동물 등의 양돈장 출입과 소독기록 등을 관리하여야한다. 본 연구에서는, RFID와 웹서버 시스템을 이용한 양돈장 출입차단 및 기록장치를 개발하였다. 사람의 출입관리를 위하여 13.56MHz의 접촉식 RFID 시스템을 개발하였으며, 차량 출입관리를 위해서는 900MHz RFID 시스템을 이용한 차량인식 시스템을 개발하였다. 시험결과 시스템 작동, 인식, 웹서버 데이터 저장 등의 성능이 양호한 것으로 판단되었다. 이후, 차량 출입시스템과 사람 출입 및 소독기록장치를 연동하여 시험을 실시하였으며, 기록된 데이터는 전용 프로그램을 이용하여 웹서버의 DB에 저장하였다. 성능시험결과, 출입관리와 데이터관리에 문제가 없는 것으로 판단되었다.

• 한국가정과학회지
• /
• 제3권2호
• /
• pp.39-46
• /
• 2000

This research was to identify housing identity expressed on entrance features In Korean single detached houses. The data were collected from field study and content analysis method of 45 houses in Chonju city. The methods of observation, of measuring the size, of sketching. and of Photos of entrance feature in the single detached houses were used for this study. Results of this study were as follows. First. the height and the form both of main gate and of wall tended to be closed. In particular. the size of main gate tended to be shown off rather than having practical funtion. whereas the form of main gate were semi-opened and thus could not guaranteed privacy of the residents very well. Second, 53.3% of the direction of main entrance were found to be at right-an91e0 with main gate, which reflected the control needs of private life. Third. the balance of main gate and exterior was homogeneous, which expressed the increase of aethetic concern of exterior Finally. most of entrance approach were made of stones and bricks. This result indicated that the practical funtion of entrance approach was emphasized the emotional environment was not considered in building the entrance approach.

• 한국화재소방학회논문지
• /
• 제5권2호
• /
• pp.21-35
• /
• 1991

As a part of studies of drag reduction phenomenon, at the entrance flow region of abrupt contraction tube flowing water, dilute and concentrated drag reducing polymer solutions contraction losses are estimated experimentally. Futher more, entrance lengths are considered theoretically and are measured experimentally. In the present experiment, fluid temperature is fixed l$0^{\circ}C$ and flow rates are 3,000

• KIEAE Journal
• /
• 제8권6호
• /
• pp.47-55
• /
• 2008

The purpose of this study is as follows. 1) An element to organize the landscape of an apartment entrance space and setting up, a characteristic of landscape through the actual condition analysis. 2) The characteristic of the type analysis and classified the shape of the entrance as the type. 3) The degree to like the landscape analysis through the making up question. The result of this research is as follows. The entrance of the apartment complex of 71 as of 92 and set an element to organize the landscape and the characteristic of landscape through the frequency analysis and divided an entrance landscape of apartment into 4 types through the cluster analysis. An entrance landscape of apartment types of the entrance is classified as follows. 1) Type I: A model wall-fence type, 2) Type II: The side constructing a building-fence type, 3) type III: The side constructing a building-retaining wall-mixing tree type, 4) type IV: The moulding constructing a building-a retaining wall type.

• 한국조경학회지
• /
• 제29권5호
• /
• pp.37-42
• /
• 2001

This research is related to house entrance recognition of residents, who have long kept the entrance without a closing door in Eoeun village, Geumho, Keongbook. The purpose of the research was to interpret the recognition of a house entrance in Eoeun village with the theories of cultural ecology. Final results suggest the belief for all the inhabitant\`s welfare through anthropological adaptation to habitat. The fish in the Geumho River had sought the shelter from the heavy rain in summer. The Eoeun forest at the entrance of the village provided good shelter for the fish. The Eoeun residents thought that the safe shelter fur the river fish is also semantic for the people. They believed that if the fish could not find shelter, i.e., the Eoeun forest and left, the village could be not safe for their life. Therefore, even the entrance of house should be structurely opened for the fish shelter in a symbolic sense. The entrance without a closing door has implied that their life should depend upon their natural environments because they have believed that till now there have been no considerable accidents in the village.

• 수산해양기술연구
• /
• 제52권1호
• /
• pp.9-16
• /
• 2016

This study was conducted to analyze fishing capacity and bycatch by mesh size and entrance size of spring net pot conducted by water tank and field experiment. The water tank experiments were conducted by using traps with mesh size of 22 mm and entrance size of 120 mm and 140 mm, respectively in the water tank of NIFS. The field experiment was conducted using 5 kinds of spring net pot with mesh sizes of 20 mm, 22 mm, 35 mm and entrance size of 120 mm, 130 mm, 140 mm, 360 mm by coastal trap fishery vessel operating around the area of Geoje island. In the result of water tank experiments, the catch of conger eel was 1.5 times higher when using trap with entrance size of 140 mm than that of 120 mm. In the field experiment, when using same mesh size, the larger the entrance size, the higher amount of conger eel catch, bycatch and number of bycatch species. When using the same entrance size, the larger the mesh size, the lower amount of conger eel catch and number of bycatch species, whereas the amount of bycatch showed increasing trend.

• Journal of the Korean Data and Information Science Society
• /
• 제19권4호
• /
• pp.1111-1122
• /
• 2008

Recently, because of decreasing in population, most of local universities are competing to attract new students in the entrance examination. These situations cause that most of the examinee apply for several universities to matriculate in a university. So these problem may raise a serious trouble such as additional new students invited. Therefore, in this study, we consider a few statistical models by using data mining technique to understand the pattern of new students who discard registration(seceders) in spite of success in the D university entrance examination. To construct these models, we use entrance examination data of three years. On the basis for analysis results of entrance examination data, we look into the features for secession of new students who success in an university entrance examination. We provide a basic information to make a effective entrance plan for seceders in future. Also, we make a search for the trend based on three years by analyzing entrance examination data of 2006, 2007 and 2008 years.

• 설비공학논문집
• /
• 제12권9호
• /
• pp.802-809
• /
• 2000

This study numerically analyzes the thermal and flow characteristics inside the header in PFHE(parallel-flow heat exchanger) by employing a three-dimensional turbulence modeling. The following quantities are examined by varying the injection angle of the working fluid, the location of entrance and the shape of entrance: flow nonuniformity, heat transfer rate, and flow distribution in each passage. The result shows that the degree of significance among the parameters affecting the header part is in the order of the injection angle, the shape of entrance, and the location of entrance. The result also indicates that heat transfer rates compared to the reference model are increased by about 152% for the angle of injection of -$20^{\circ}C$, by about 127% for the shape of entrance with right and left long rectangular form, and by about 108% for the location of entrance located at the lowest Position.