• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.603-613
• /
• 2021

As a core policy for achieving the goal of reducing greenhouse gas emissions in the building sector, Korea has enforced the mandatory certification of zero energy buildings for new public buildings from 2020. This study suggests energy-saving technologies and economic factors that building officials can refer to for decision-making on the implementation of zero energy buildings. For this study, the construction cost for the energy item of a building was analyzed by collecting the building energy efficiency level certification data and detailed construction cost statement data from public institutions for the last three years. Based on the building energy efficiency certification data, each energy item of the baseline building was derived, and the energy performance of the zero energy building was derived through repetitive simulations by gradually increasing the energy performance value of the baseline building. By applying the analyzed construction cost, the construction cost for each energy item of the baseline and zero energy buildings was derived. As a result, the lighting equipment contributed up to 10.5% energy savings, and the increase in construction cost of the cooling and heating system was at least 9.1%.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.6
• /
• pp.599-610
• /
• 2020

The AED (Automated External Defibrillator) is not evaluated for spatial accuracy and temporal availability even if it is located within a building or a specific area that needed necessary to partition by spatial analysis and location allocation analysis. As a result of the analysis, the spatial analysis was performed using the existing public data of AED with applied the GIS location analysis method. A public institution (119 safety center, police box) was selected as a candidate for a public AED base that can operate 24 hours a day, 365 days a year according to the characteristics of each residential area. In addition, Thiessen Polygons were created for each candidate site and divided by regions. In the analysis of the service was analyzed regional in terms of accessibility to emergency medical services in consideration of the characteristics of AED, that emergency vehicles could arrive within 4 minutes of the time required for emergency medical treatment in most areas of the study area, but it did not areas outside of the city center. As a result, It was found that the operation of the AED base service center centered on vehicles of public institutions is effective for responding to AED patients at night and weekend hours. 19 Safety Center under and police box the jurisdiction of Daegu City to establish an AED service center for public institutions, location-based distance, attribute analysis, and minimization of overlapping areas that the method of using a vehicle appeared more efficient than using the existing walking type AED.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.511-519
• /
• 2021

Slewing bearing is applied to the transmission of rotational power of the body and turret in a special vehicle for anti-aircraft weapons that overcomes the enemy flight system approaching at low altitudes with rapid response fire. When the turret load and impact load generated when shooting are combined in performing the combat mission of a special vehicle, structural stability must be secured to achieve a successful function. Among the components of the slewing bearing, the stability of the components against the complex loads acting by the turret drive and shooting was evaluated by considering the shape and material characteristics of the ring-gear, roller, and wire-race. As a research method for stability evaluation, based on engineering theory, the strength characteristics of the components were examined by numerical calculations. Finite element analysis was performed on components using the ANSYS analysis program. The results of theoretical analysis and the results of finite element analysis were very similar. A structural stability evaluation for the slewing bearing, which was performed mainly on the analysis, confirmed that the design strength of the slewing bearing determined in the preliminary design in the early stage of localization development was sufficient.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.707-725
• /
• 2021

Energy management systems (EnMS) contribute to sustainable energy saving and greenhouse gas reduction by emphasizing the role of energy management in production-oriented economies. Although understanding the methods used to measure energy performance is a key factor in constructing successful EnMS, few attempts have been made to examine these methods, their applicability, and their utility in practice. To fill this research gap, this study aimed to deepen the understanding of energy performance measures by focusing on four energy performance indicators (EnPIs) proposed by ISO 50006, namely the measured energy value, ratio between measured values, linear regression model, and nonlinear regression model. This paper presents policy and managerial implications to facilitate the effective use of these measures. An analytic hierarchy process (AHP) analysis was conducted with 41 experts to analyze the preference for EnPIs and their key selection criteria by the industry sector, and organization and user type. The findings suggest that the most preferred EnPI is the ratio between the measured values followed by the measured energy value. The ease of use was considered to be most important while choosing EnPIs.

• Journal of the Korea Convergence Society
• /
• v.12 no.2
• /
• pp.45-50
• /
• 2021

In this paper, we propose the development of a smart space security device that can be opened and closed remotely using IoT. Existing space security devices can control opening and closing by breaking hardware or only using button devices or replicated keys. The recent COVID-19 crisis has created several applications for non-contact devices. In this study, we propose the development of a small space security device that has the function of unlocking through an app without touching the device. By transferring the control authority to a smartphone, device that cannot be opened or closed by only operating hardware at the user's option. It is convenient and hygienic because it can be opened and closed using an app without touching the locking device. Multiple security is possible because security can be released using an app after user authentication by fingerprint recognition and pattern input on a smartphone. If the user wishes, after using the app security, the security is released by directly touching a button installed in the safe or space or opening it with a key. In addition, by adding an inactive function to the app, it is designed so that the door of the safe cannot be opened when the key is lost or the small safe is lost. This study is expected to be able to effectively expand the security system by applying variously to objects that require security.

• Analytical Science and Technology
• /
• v.34 no.1
• /
• pp.23-35
• /
• 2021

In order to measure the volatile organic compounds (VOCs) of a sample which is too large to use commercially available chamber, a stainless steel vacuum chamber (VC) (with an internal diameter of 205 mm and a height of 50 mm) was manufactured and the temperature of the chamber was controlled using an oven. After concentrating the volatiles of the sample in the chamber by helium gas, it was made possible to remove residual volatile substances present in the chamber under reduced pressure ((2 ± 1) × 10-2 mmHg). The chamber was connected to a purge & trap (P&T) using a 6 port valve to concentrate the VOCs, which were analyzed by gas chromatography-mass spectrometry (GC-MS) after thermal desorption (VC-P&T-GC-MS). Using toluene, the toluene recovery rate of this device was 85 ± 2 %, reproducibility was 5 ± 2 %, and the detection limit was 0.01 ng L-1. The method of removing VOCs remaining in the chamber with helium and the method of removing those with reduced pressure was compared using Korean drinking water regulation (KDWR) VOC Mix A (5 μL of 100 ㎍ mL-1) and butylated hydroxytoluene (BHT, 2 μL of 500 ㎍ mL-1). In case of using helium, which requires a large amount of gas and time, reduced pressure ((2 ± 1) × 10-2 mmHg) only during the GC-MS running time, could remove VOCs and BHT to less than 0.1 % of the original injection concentration. As a result of analyzing volatile substances using VC-P&T-GC-MS of six types of cell phone case, BHT was detected in four types and quantitatively analyzed. Maintaining the chamber at reduced pressure during the GC-MS analysis time eliminated memory effect and did not affect the next sample analysis. The volatile substances in a cell phone case were also analyzed by dynamic headspace (HT3) and GC-MS, and the results of the analysis were compared with those of VC-P&T-GC-MS. Considering the chamber volume and sample weight, the VC-P&T configuration was able to collect volatile substances more efficiently than the HT3. The VC-P&T-GC-MS system is believed to be useful for VOCs measurement of inhomogeneous large sample or devices used inside clean rooms.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.3
• /
• pp.243-249
• /
• 2021

The star tracker detects microscopic star light in space and compares it with a stored list of stars to calculate the satellite's position in the inertial coordinate system. If other light, such as the sun or the earth, enters the optical head, the star cannot be recognized and the star tracker cannot be operated. In particular, strong light such as the sun affects not only operation but also the performance of the star tracker. The sun exclusion angle of the star tracker is one of the important factors determining the performance of the star tracker. This paper performs the verification of the star tracker's sun exclusion angle. In order to verify the sun exclusion angle, we predict the sun exclusion time of the star tracker and compare it to the actual sun exclusion time of the GEO-KOMPSAT-2A star tracker. In addition, the performance of the star tracker is analyzed for normal operations against the sun exclusion in the optical head. It shows that the actual sun exclusion is maintained under the range of 26 degrees, the performance requirement of the star tracker, and the star tracker operates normally in spite of the sun exclusion.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.215-225
• /
• 2021

The purpose of this study was to empirically verify the correlation between the characteristics of safety officers and managers handling disaster and safety management, competence, and performance among disaster and safety work-level officers in medium-sized companies in South Korea. For this study, the researcher surveyed 509 disaster and safety management officers of various companies and analyzed the resultant data. The results of the analysis showed that, first, the characteristics of the safety officers handling the disaster and safety management systems had a significantly positive impact on performance. Second, the characteristics of the safety officers handling the disaster management systems had a significantly positive impact on competence. Third, the disaster and safety management competence of the safety officers had a significantly positive impact on performance. Fourth, in the relationship between the characteristics of the safety officers handling the disaster and safety management systems of businesses and their performance, the competence of the safety officers had a mediating effect.

• Korean Journal of Remote Sensing
• /
• v.37 no.3
• /
• pp.627-636
• /
• 2021

Although many studies on ship detection using synthetic aperture radar (SAR) satellite images are being conducted around the world, there are still very few employing SAR microsatellites, as most of the microsatellites are optical satellites. Recently, the ICEYE and Capella Space have embarked on the development of microsatellites with SAR sensor, and similar projects are being initiated globally in line with the flow of the new space era [e.g., for the ICEYE: 18 satellites (~2021); Capella Space: 36 satellites (~2023); and the Coast Guard SAR: 32 satellites in the early development stage]. In preparation for these new systems, it is important to review the SAR microsatellite system and the recent advances in this technology. Accordingly, in this paper, the current status and characteristics of optical and SAR microsatellite constellation operation are described, and studies using them are investigated. In addition, based on the status and characteristics of the representative SAR microsatellites, specifically the ICEYE and Capella systems, methods for using SAR microsatellite data for ship detection applications are described. Our results confirm that the SAR microsatellites operate as a constellation and have the advantages of short revisit cycles and quick provision of high-resolution images. With this technology, we expect SAR microsatellites to contribute greatly to the monitoring a wide-area target vessel, in which the spatiotemporal resolution of the imagery is especially important.

• The Journal of Society for e-Business Studies
• /
• v.26 no.2
• /
• pp.1-17
• /
• 2021

This paper elucidates the effect of characteristics of service quality on continuance usage intention of digital healthcare service using mediating factors of user expectation and user utility. First, we classified independent factors into three types such as service system characteristics, user characteristics, and healthcare service characteristics from the previous studies, and investigated the effect of three independent factors on continuance usage intention of digital healthcare service. Second, we analyzed the impact of two mediating factors, user expectation and user utility, on the continuance usage intention. We developed a research model that includes three types of independent factors, mediated factors of user expectation and user utility, and a dependent factor of continuance usage intention. We surveyed a total of 357 samples from digital healthcare service users and analyzed the research model. The research results significantly show that Characteristics of Users is essential factor impacting a dependent factor of Continuance Usage Intention. The results indicate the followings: (1) Characteristics of Users including the variables of Innovation impacts User Expectation, and User Expectation affects Users Utility, and Users Utility also affects Continuance Usage Intention. (2) Characteristics of Service Systems including the variables of Functionality, Compatibility, and Convenience and Characteristics of users of Innovation variable impact the mediating factor of User Expectation, and User Expectation also affects the factor of Continuance Usage Intention. (3) Characteristics of Healthcare Services including the variables of Reliability, Ease of Operation, Safety, and Accuracy impact User Utility, and User Utility also affects Continuance Usage Intention.