• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1993년도 제18회 학술대회 초록집
• /
• pp.57-62
• /
• 1993

To increase the fuel economy, a reduction of friction loss is important in engines. Experimental investigations have been required for reducing the friction loss of crankshaft bearings. Hydraulic cylinder, and servo control ler system which modified the applied load, and test rig for the observation of the characteristics of engine crankshaft bearings were designed and fabricated. Experiment is performed. Friction torque, journal locus and circumferential temperature variations of crankshaft bearings were measured with appling load, revolution speed, and oil inlet temperature, etc.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 추계학술대회 논문집
• /
• pp.324-329
• /
• 2010

Vibrations caused by automobile engine are absorbed mostly by a passive-type engine mount. However, user specifications for automobile vibrations require more stringent conditions and higher standard. Hence, active-type engine mount have been developed to cope with such specifications. The active-type engine mount consists of sensor, actuator and controller where a control algorithm is implemented. The performance of the active engine mount depends on the control algorithm if the sensor and actuator satisfies the specification. The control algorithm should be able to suppress persistent vibrations caused by the engine which are related to engine revolution. In this study, three control algorithms are considered for suppressing persistent vibrations, which are the positive position feedback control algorithm, the strain-rate feedback control algorithm, and the modified higher harmonic control algorithm. Experimental results show that all the control algorithms considered in this study are effective in suppressing resonant vibrations but the modified higher harmonic controller is the most effective controller for non-resonant vibrations.

• 한국소음진동공학회논문집
• /
• 제21권8호
• /
• pp.741-751
• /
• 2011

Vibrations caused by automobile engine are absorbed mostly by a passive-type engine mount. However, user specifications for automobile vibrations require more stringent conditions and higher standard. Hence, active-type engine mounts have been developed to cope with such specifications. In this study, the active vibration absorber which can be attached to the sub-frame of automobile is used for the suppression of vibrations caused by engine. The active vibration absorbing system consists of sensor, actuator and controller where a control algorithm is implemented using DSP. The vibration caused by engine reveals harmonic disturbances varying with engine revolution. Therefore, the control algorithm should be able to cope with harmonic disturbances. In this study, the modified higher harmonic control technique which can selectively suppress harmonic disturbance is considered. Experimental results on automobile show that the proposed active vibration absorbing system is effective in suppressing vibrations caused by engine.

• 한국정밀공학회지
• /
• 제24권12호
• /
• pp.74-81
• /
• 2007

This paper focuses on improvement of the reliability for endurance test to serve military automobiles. The driving loads have been measured by use of the wireless telemetry system for the drive shaft of the 4-wheel drive car. In order to analyze the transmission input torque and engine revolution of loads of the test courses and unpaved road have been made use of the revolution counting and cumulative damage by miner's rule. This paper presents the evaluated result for quantified damage about the test courses and roads.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권3호
• /
• pp.644-654
• /
• 2001

In this paper, an electronic control unit of the automobile engine for optimal fuel injection an spark timing control has been designed and developed. This system includes hardware and software for a precise control of fuel injection and ignition timing. Especially, the crank angle sensor provides two separate signals: One is the position signal (POS) which indicates 180 degree pulses per revolution, and the other is the reference signal (REF) that represents each cylinder individually. Consequently, the developed engine control system has been able to control fuel injection and ignition timing more quickly and accurately. Through the experiment, it has been found that the fuel injection duration and the position of MBT have been influenced by coolant temperature, air flow rate and engine speed.

• 한국자동차공학회논문집
• /
• 제11권2호
• /
• pp.89-95
• /
• 2003

We consider a problem of application of analytical redundancy to engine synchronization process of spark ignition engines, which is critical to timing for every ECU process including ignition and injection. The engine synchronization process we consider here is performed using the pulse signal obtained by the revolution of crankshaft trigger wheel (CTW) coupled to crank shaft. We propose a discrete-time linear model for the signal, for which we construct FDI (Fault Detection & Isolation) system consisting residual generator and threshold based on linear observer.

• 한국자동차공학회논문집
• /
• 제20권6호
• /
• pp.52-60
• /
• 2012

Minimizing the cylinder wear and the consumption rate of cylinder oil in a large two-stroke diesel engine is of great economic importance. A motor-driven cylinder lubricator for Sulzer RT-flex large two-stroke diesel engines developed by authors is in need of modifying the lubricating system to lubricate cylinder parts optimally by an electronically controlled quill device according to changes of engine load and revolution speed. In order to apply the developed accumulating distributor to an integrated cylinder lubricator by the electronically controlled system as the third research stage, the lubricating system is improved in the electronically controlled quill device with a solenoid valve. In this study, the effects of lubricator revolution speed, driving pressure and cylinder back pressure on oil feed rate, maximum discharge and delivery pressures are experimentally investigated by using the integrated cylinder lubricator system with an accumulated distribution by the electronic control. It is found that the oil feed rate of the developed integral cylinder lubricator system is less than that of the motor-driven cylinder lubricator by the electronically controlled quill system equipped with an accumulating distributor because of the decrease of delivery speed by increasing the maximum delivery pressure in the same experimental condition.

• 농업과학연구
• /
• 제46권4호
• /
• pp.723-735
• /
• 2019

The power-train is the most important component of an agricultural tractor. In this study, the strength of the driving gear transmission of an 82 kW-class tractor was analyzed using equivalent torque during plow tillage. The load measurement system consisted of an engine revolution speed sensor, torque-meters, revolution speed sensors for four axles, and pressure sensors for two hydraulic pumps. The load data were measured during plow tillage for four speed stages: F2 (2.78 km/h), F5 (5.35 km/h), F7 (7.98 km/h), and F8 (9.75 km/h). Aspects of the gear-strength such as bending stress, contact stress, and safety factors were analyzed under two torque conditions: the equivalent torque at the highest plow load for the F8 speed stage and the maximum engine torque. The simulation results using KISSsoft showed that the maximum engine torque conditions had a lower safety factor than did the highest equivalent torque condition. The bending safety factors were > 1 at all gear stages, indicating that gear breakage did not occur under actual measured operating conditions, nor under the maximum torque conditions. However, the equivalent torque condition in the contact stress safety factor was > 1, and the maximum torque condition was < 1 at the first gear pair. The method of analysis using the equivalent torque showed lower stress and higher safety factor than did the method using maximum torque. Therefore, when designing a tractor by applying actual working torque, equivalent torque method would support more reliable product development.

• 한국수산과학회지
• /
• 제10권4호
• /
• pp.227-235
• /
• 1977

1976년 8월 16일 (북위 $34^{\circ}27'30'$ 동경 $128^{\circ}23'15'$)과 1977넌 7월 28일(북위 $34^{\circ}47'$ 동경 $128^{\circ}53'$)에 관악산호의 선박소음이 r.p.m에 따라 항해시와 정선시 (기관의 공회전)의 소음압이 해중에 분포하는 것을 조사 연구한 결과를 요약하면 다음과 같다. 1. 기관의 r.p.m.과 음압관계 r.p.m.과 음압의 증가비는 100 : 1이었으며 r.p.m. 600에서 104dB로 peak를 이루었다. 2. 외현주변의 해중해압분포 A. 정선시의 기관소음압 100,102,103,104,104 dB일때 관측점 No.1에서 69,70,72,74,75 dB No.3은 No. 1에 비해 $2\~3\;dB$ 증가해 peak를 이루었고 No.5는 No.3에 비해 $10\~15\;dB$씩 감쇠되었다. 기관소음압이 최대 일때 관측점 $No.1\~No.5$에서의 음압이 투과된 백분율은 약 $78,79,80,73,70\%$였다. B. 항해시의 선박수중소음압 정선시와 같은 기관회전 조건하에서 No.2에서 69,72,75,77,78 dB로 peak를 이고 No. 1보다 $2\~3\;dB$씩 감쇠되었다. 기관 최고소음압에 대한 $No1.\~No.5$에서의 음압투과 백분율은 약 $78,81,79,77,71\%$ 였다. 3. 항해시와 정선시의 외현해중 음압 peak점에서의 음압을 비교하면 항해시가 1 dB 높았다. 4. 선박이 멀어질 때 0 m(관측점 통과시)에서 67 dB, 1,400 m에서 56 dB였다. 5. 선박이 가까워질 때 거리 0 m에서 72 dB, 1,400 m에서 57 dB로서 멀어 질때와 비교하면 0m에서 5 dB, 600 m에서 2 pB씩 증가한 도플러 효과가 일어남을 알 수 있다. 6. r.p.m.을 600으로 하여놓고 스크류를 돌리지 않고 기관만 공회전 시킬 때 수평거리 20 m인 곳의 No.7에서 수심 10 m마다 50 m까지의 음압은 68,75,62,59,55,51 dB였다.

• 기술혁신학회지
• /
• 제20권2호
• /
• pp.387-405
• /
• 2017

본 논문의 목적은 4차 산업혁명의 환경변화를 중소기업 관점에 맞추어 고찰함으로써 4차 산업혁명과 중소기업의 관련성 및 중소기업 지원정책의 성격과 방향에 대해 살펴보는 데 있다. 4차 산업혁명으로 초래될 수 있는 미래의 유망분야는 세계경제포럼 조사, 제조업 혁신, 신성장동력 등으로부터 도출될 수 있고 GE의 대응사례가 참고가 될 수 있다. 4차 산업혁명과 중소기업 지원과의 관련성이 중요할 뿐 아니라 유망분야 가운데 중소기업에 대한 적합성 여부가 검토되어야 한다. 유망성과 적합성의 기준에 따라 미래 신규사업을 발굴함에 있어서 제품과 서비스, 세부와 파생의 분야가 모두 대상이 될 수 있을 것이다. 중소기업의 4차 산업혁명 대응을 위해서는 중소기업 자체의 역량강화와 함께 정부 차원의 적극적인 지원정책이 모색되어야 한다.