• Tribology and Lubricants
• /
• 제34권5호
• /
• pp.197-207
• /
• 2018

Thermal deterioration of fuel due to long-term storage influences engine performance and causes malfunctions. Fuel stability is usually evaluated via heat resistance and thermal stability during a brief heat shock at high temperature; storage stability in this scenario means that there is very little change in the quality of the fuel during long-term storage. In addition, rubber-based products such as oil seals, O-rings, and rubber hoses can influence the quality of the fuel. When these rubber products are in contact with fuel, they can swell, mechanically weaken, and occasionally crack, thus leaking low molar weight rubber and additives including plasticizer and antioxidant into the fuel to degrade its properties and shorten its useful lifetime. This study determines the thermal stabilities of three kinds of synthetic fuels by evaluating their low temperature kinematic viscosities, chemical composition changes via GC analyses, gross heat of combustion, and color changes. We evaluate the compression set of O-rings by immersing one NBR and two FKM rubber O-rings in the three synthetic fuel samples in airtight containers at variable storage temperatures for six months; from this, we estimate the lifetimes of the O-rings using the Power law model. There were very little changes in the chemical compositions and gross heat of combustion after six months of the experiment. The lifetimes are thus dependent on the materials of the rubber products, and in particular, the FKM O-ring was calculated to have a theoretical lifetime of 200 to 5,700 years. These results indicate that the synthetic fuels maintain their physical properties even after long-term storage at high temperatures, and the FKM O-ring is suitable for long-term sealing of these fuels.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• 제45권1호
• /
• pp.46-55
• /
• 2009

To compare and evaluate the suitability and comfort levels of the environment on board a stern trawl training ship, KAYA(GT: 1737 tons, Pukyong National University), with the international standardization guide ISO 6954:2000(E), measurements of the hull vibration on accommodation areas and working areas of the training ship from July 8 to July 10, 2008 were completed upon KAYA's linear sea route. The vibrations along the z-axis were measured with the use of a 3-axis vibration level meter, which included a marine vibration card. Results show accelerations of the vibrations on the passenger's accommodation area to be 42.0-115.8(average: 78.0, standard deviation(SD): 21.0) mm/$s^2$, which is largely below the permissible upper limit, but 75 % of the observation points exceeded the permissible lower limit of 71.5 mm/$s^2$, indicating a comfortable environment. The accelerations of the vibration in a frequency of 10-24Hz lowering the visual performance were measured at 2.5-12.0(average: 7.6, SD: 3.1) mm/$s^2$. The crew s accommodation area experienced vibration accelerations of 42.9-82.3(average: 93.1, SD: 53.1) mm/$s^2$, which is generally below the permissible upper limit of 214.0 mm/$s^2$, and 62.5% of the observation points did not exceed the permissible lower limit of 107.0 mm/$s^2$, denoting a level of comfort. The acceleration of the vibration in a frequency of 10-24Hz were 4.7-28.3(average: 12.4, SD: 8.8) mm/$s^2$. On the crew s working area the accelerations were measured at 86.9-153.9(average 119.3, SD 18.0) mm/$s^2$. These values were generally below the permissible upper limit of 286.0 mm/$s^2$ and only 12.5% of the observation points did not exceed the permissible lower limit of 143.0 mm/$s^2$, the level at which a high level of comfort is maintained. The accelerations in frequency of 10-24Hz and 30Hz were 9.1-29.8 (average 13.8, SD= 4.5) mm/$s^2$ and 8.9-13.7 (average 11.8, SD 2.1) mm/$s^2$, respectively. In conclusion the boarding environment of the training ship was good in general although an improvement of the vibration condition partially needed on the crew s accommodation area near the engine room.

• The Journal of the Korea Contents Association
• /
• 제7권4호
• /
• pp.1-9
• /
• 2007

Cellular operators develop high speed mobile internet and multi-function cellular phones to activate new business model based on mobile internet services. Domestic cellular operators evolve their mobile networks from cdma2000-1x and EvDo to HSDPA to activate high speed mobile internet services. They also develop mobile internet platforms such as WIPI, BREW, and J2ME on multi-function cellular phones having multimedia solutions such as camera, MP3, MPEG, 3D game engine, DMB, PAN such as bluetooth, IrDA, W-LAN, and location information using GPS. But, content providers have problems of redevelopment of the same mobile internet application on different mobile internet platforms provided by cellular operators. In this paper, we develop conversion solutions for interoperability of mobile internet applications on WIPI and BREW using an one-pass compiler. We confirm the performance the proposed conversion solutions for the API conversion rate, the converted file size, and the full conversion time using the popular mobile games which are the killer applications on WiPI and BREW.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제11권4호
• /
• pp.1468-1474
• /
• 2010

The establishment of a successful business must be preceded by comprehensive entrepreneurial preparation and research, as well as the development of a truly attractive business idea. Research to-date has tended to be based solely on factors relating to entrepreneurial activity or business performance. Research into the development and evaluation of a business idea has been insufficient. The purpose of this research is to propose a methodology for evaluating the attractiveness of a business idea objectively. This research measures the attractiveness of a business idea by the click through rate (CTR) to a website generated by specific keyword entry into internet search engines. The attractiveness of a business idea can be presented by the formula: number of relevant keyword searches x CTR on search results. As the number of searches for individual keywords is published by the search engines and it is possible to estimate CTRs for specific search results, we can objectively evaluate the attractiveness of a business idea. By analyzing keyword search data and CTRs obtained from search engines over a one month period, 1124 keywords that relate to foreign language education have been identified. A regression formula has also been derived, predicting the click through rate for search results. This research and its findings can be used to raise the success rates of new businesses; proposing objective guidelines for business idea development and evaluation. It is particularly meaningful because it introduces a new methodology to the arena.

• Journal of KIISE:Information Networking
• /
• 제28권2호
• /
• pp.262-276
• /
• 2001

Recently much research for developing forwarding table that support fast router without employing both special hardware and new protocols. This article introduces a new forwarding data structure based on the software to enable forwarding lookup to be penormed at giga-bit speed. The forwarding table is known as a bottleneck of the routers penormance due to its high complexity proportional to the forwarding table size. The recent research that based on the software uses a Patricia trie and its variants. and also uses a hash function with prefix length key and others. The proposed forwarding table structure construct a forwarding table by the bit stream array in which it constructs trie from routing table prefix entries and it represents each pointer pointing the child node and the associated forwarding table entry with one bit The trie structure and routing prefix pointer need a large memory when representing those by linked-list or array. but in the proposed data structure, the needed memory size is small enough since it represents information with one bit. Additionally, by use a lookup method that start searching at desired middle level we can shorten the search path. The introduced data structure. called bit-map trie shows that we can implement a fast forwarding engine on the conventional Pentium processor by reducing the backbone routing table fits into Level 2 cache of Pentium II processor and shortens the searching path. Our experiments to evaluate the performance of proposed method show that this bit-map trie accomplishes 5.7 million lookups per second.

• The KIPS Transactions:PartB
• /
• 제14B권7호
• /
• pp.513-522
• /
• 2007

Clustering is to divide given data and automatically find out the hidden meanings in the data. It analyzes data, which are difficult for people to check in detail, and then, makes several clusters consisting of data with similar characteristics. On-Line Document Clustering System, which makes a group of similar documents by use of results of the search engine, is aimed to increase the convenience of information retrieval area. Document clustering is automatically done without human interference, and the number of clusters, which affect the result of clustering, should be decided automatically too. Also, the one of the characteristics of an on-line system is guarantying fast response time. This paper proposed a method of determining the number of clusters automatically by geometrical information. The proposed method composed of two stages. In the first stage, centers of clusters are projected on the low-dimensional plane, and in the second stage, clusters are combined by use of distance of centers of clusters in the low-dimensional plane. As a result of experimenting this method with real data, it was found that clustering performance became better and the response time is suitable to on-line circumstance.

• The Korean Journal of Applied Statistics
• /
• 제30권3호
• /
• pp.363-376
• /
• 2017

The insurance market is saturated and its growth engine is exhausted; consequently, the insurance industry is now in a low growth period with insurance companies that face a fierce competitive environment. In such a situation, it will be an important issue to find the probability distributions that can explain the flow of insurance claims, which are the basis of the actuarial calculation of the insurance product. Insurance claims are generally known to be well fitted by lognormal distributions or Pareto distributions biased to the left with a thick tail. In recent years, skew normal distributions or skew t distributions have been considered reasonable distributions for describing insurance claims. Cooray and Ananda (2005) proposed a composite lognormal-Pareto distribution that has the advantages of both lognormal and Pareto distributions and they also showed the composite distribution has a higher fitness than single distributions. In this paper, we introduce new composite distributions based on skew normal distributions or skew t distributions and apply them to Danish fire insurance claim data and US indemnity loss data to compare their performance with the other composite distributions and single distributions.

• Journal of the Earthquake Engineering Society of Korea
• /
• 제3권3호
• /
• pp.63-74
• /
• 1999

A sliding mode fuzzy control (SMFC) algorithm is presented for vibration of large structures. Rule-base of the fuzzy inference engine is constructed based on the sliding mode control, which is one of the nonlinear control algorithms. Fuzziness of the controller makes the control system robust against the uncertainties in the system parameters and the input excitation. Non-linearity of the control rule makes the controller more effective than linear controllers. Design procedure based on the present fuzzy control is more convenient than those of the conventional algorithms based on complex mathematical analysis, such as linear quadratic regulator and sliding mode control(SMC). Robustness of presented controller is illustrated by examining the loop transfer function. For verification of the present algorithm, a numerical study is carried out on the benchmark problem initiated by the ASCE Committee on Structural Control. To achieve a high level of realism, various aspects are considered such as actuator-structure interaction, modeling error, sensor noise, actuator time delay, precision of the A/D and D/A converters, magnitude of control force, and order of control model. Performance of the SMFC is examined in comparison with those of other control algorithms such as $H_{mixed 2/{\infty}}$ optimal polynomial control, neural networks control, and SMC, which were reported by other researchers. The results indicate that the present SMFC is an efficient and attractive control method, since the vibration responses of the structure can be reduced very effectively and the design procedure is simple and convenient.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• 제34권9호
• /
• pp.875-883
• /
• 2010

The thermal performance of LNG fuel tanks of vehicles is determined by the time for non-venting storage of fuel and the amount of fuel supplied to the engine. In this study, we selected a double-walled vacuum-insulated fuel tank with a volume of 450 liter, and the properties of the fuel contained in it were assumed to be the same as those of the methane($CH_4$). For the increasing the non-venting fuel storage time, we propose the use of shielded penetration pipes in the tank. We compared the storage times of the tank used in our study with those of the conventional fuel tank. Further, the additional heat input required to maintain the fuel pressure necessary for an appropriate fuel supply rate was predicted. For these parameters, we derived a thermodynamic relationship that can be used to estimate the rate of increase in pressure for a known heat input, and we obtained equations for estimating the rate of heat leaked by using the established heat transfer model. From the results of numerical computation, we found the non-venting storage time of the tank with shielded pipes to be 25-30% higher than that of the tank with unshielded pipes. Further, we determined the appropriate operation conditions by taking into consideration the transfer rate of additional heat provided to the fuel tank.

• Journal of the Korean Society of Marine Environment & Safety
• /
• 제11권2호
• /
• pp.109-115
• /
• 2005

Hydrocyclone has been widely used for the solid-liquid separation in many industrial sites because of its comparatively preferable applications that can be applied to wide-range particle sizes. If seawater with impurities flows through pumps or heat exchanger, it might cause an decrease in the efficiency of cooling system In this paper, we have suggested some methods of separating impurities from seawater in the cooling system by using a Hydrocyclone. The effects of design factors as solid concentration, cyclone inlet pressure, flow rate and diameter of underflow on the separating performance of the Hydrocyclone were investigated The results from this study are summarized as follows: 1) In proportion to the decrease of solid concentration, the efficiency of solid-liquid separation is improved. 2) According as the cyclone inlet pressure increases the efficiency of separation is improved. Conclusively, this research suggested that the Hydrocyclone will be used as a pre-treatment system of cooling water in machines, and eventually prevent unexpected accidents in engine systems.